The influence of CNTs on the microstructure and ductility of CNT/Mg composites

被引：56
|
作者：
Han, G. Q. [1 ]
Shen, J. H. [2 ]
Ye, X. X. [2 ]
Chen, B. [2 ]
Imai, H. [2 ]
Kondoh, K. [2 ]
Du, W. B. [1 ]
机构：
[1] Beijing Univ Technol, Coll Mat Sci & Engn, Beijing, Peoples R China
[2] Osaka Univ, Joining & Welding Res Inst, Suita, Osaka 565, Japan
来源：
MATERIALS LETTERS | 2016年 / 181卷
关键词：
CNT/Mg composites; Microstructure; Twinning; Ductility; METAL-MATRIX COMPOSITES; CARBON NANOTUBES; GRAPHENE NANOPLATELETS; MECHANICAL-PROPERTIES; MAGNESIUM ALLOY; TENSILE; STRENGTH;
D O I：
10.1016/j.matlet.2016.06.021
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Powder metallurgy magnesium (Mg) composites reinforced with multi-walled carbon nanotubes (MWCNTs) were developed by an effective three-step process. CNT5 were uniformly dispersed on the Mg powders surface without damaged structure. A large amount of twins appeared in the as-extruded CNT/Mg composites, and the basal texture was weakened comparing to as-extruded pure Mg, which played a positive role in the ambient tensile deformation. The elongation to failure of Mg composite with 0.08 wt% CNT5 has increased greatly by 32%. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码：300 / 304
页数：5
相关论文
共 50 条
  • [21] Effect of Dual Shot Peening on Microstructure and Wear Performance of CNT/Al-Cu-Mg Composites
    Zhu, Wenlong
    Liu, Huabing
    Xing, Shilong
    Jiang, Chuanhai
    Ji, Vincent
    MATERIALS, 2024, 17 (20)
  • [22] The influence of microstructure on the ductility of iron aluminides
    Morris, DG
    Morris-Muñoz, MA
    INTERMETALLICS, 1999, 7 (10) : 1121 - 1129
  • [23] Strengthening Ni-Coated CNT/Mg Composites by Optimizing the CNT Content
    Xu, Jilei
    Zhang, Yizhuang
    Li, Zhiyuan
    Ding, Yunpeng
    Zhao, Xin
    Zhang, Xinfang
    Wang, Hanying
    Liu, Changhong
    Guo, Xiaoqin
    NANOMATERIALS, 2022, 12 (24)
  • [24] Effects of CNTs content on microstructure and mechanical properties of Cnt/α-Al2O3 and Cnt-Csf/α-Al2O3 composites
    Jia, Jiangang
    Liu, Diqiang
    Zhang, Sheng
    Zhang, Bo
    Liu, Shunwei
    Ji, Genshun
    CERAMICS INTERNATIONAL, 2019, 45 (16) : 19956 - 19961
  • [25] Effect of the CNTs into SiCp-Al interfacial micro-zones on ageing precipitation behavior, microstructure and mechanical properties of SiCp (CNT)/Al-Zn-Mg-Cu composites
    Wang, Xiaoshu
    Wang, Xiaozhen
    Liu, Kan
    Cao, He
    Su, Yishi
    Zhang, Di
    Ouyang, Qiubao
    COMPOSITES PART B-ENGINEERING, 2023, 259
  • [26] Powder assembly & alloying to CNT/Al-Cu-Mg composites with trimodal grain structure and strength-ductility synergy
    Fu, Xiaowen
    Tan, Zhanqiu
    Ma, Ziqi
    Li, Zan
    Fan, Genlian
    Xiong, Ding-Bang
    Li, Zhiqiang
    COMPOSITES PART B-ENGINEERING, 2021, 225
  • [27] Acquiring well balanced strength and ductility of Cu/CNTs composites with uniform dispersion of CNTs and strong interfacial bonding
    Wang, Xinhua
    Guo, Baisong
    Ni, Song
    Yi, Jianhong
    Song, Min
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 733 : 144 - 152
  • [28] CNT-induced heterogeneous matrix grain structure in CNTs/Al composites
    Wan, Jie
    Chen, Biao
    Zhou, Xinyi
    Cao, Lin
    Geng, Huarui
    Shen, Jianghua
    Bahador, Abdollah
    Kondoh, Katsuyoshi
    Li, Jinshan
    CARBON, 2024, 216
  • [29] Investigation on the Microstructure and Mechanical Properties of CNTs-AlSi10Mg Composites Fabricated by Selective Laser Melting
    Luo, Shixuan
    Li, Ruifeng
    He, Peiyuan
    Yue, Hangyu
    Gu, Jiayang
    MATERIALS, 2021, 14 (04) : 1 - 15
  • [30] Effect of CNTs on precipitation hardening behavior of CNT/Al-Cu composites
    Nam, Dong H.
    Kim, Yun K.
    Cha, Seung I.
    Hong, Soon H.
    CARBON, 2012, 50 (13) : 4809 - 4814
12345