Processing and properties of ultrahigh-carbon (1.6%C) steel

被引：14
|
作者：
Zhang, Zhan-Ling [1 ]
Liu, Yong-Ning [1 ]
Zhu, Jie-Wu [1 ]
Yu, Guang [1 ]
机构：
[1] Xian Jiaotong Univ, State Key Lab Mech Behav Mat, Xian 710049, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2008年 / 483-84卷
基金：
中国国家自然科学基金;
关键词：
ultrahigh-carbon steel; ultrafine grains; mechanical properties; fracture mechanism;
D O I：
10.1016/j.msea.2006.09.145
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
An ultrahigh-carbon steel containing 1.6 wt.% carbon (UHCS-1.6C) was processed to obtain ultrafine spheroidized ferrite, pearlite and tempered martensite, respectively. The tensile properties of these structures were evaluated at room temperature. The ultimate tensile strengths of UHCS-1.6C ranged from 930 to 1570 MPa, elongations to failure from 4.4 to 19%, and yield ratios from 0.65 to 0.92. The fracture mechanisms of these structures were clarified based on an examination to the fracture surfaces. The present results indicate that ultrahigh-carbon steels can be easily processed to achieve unique microstructures and properties. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码：64 / 66
页数：3
相关论文
共 50 条
  • [41] IMPACT PROPERTIES OF A LAMINATED COMPOSITE BASED ON ULTRAHIGH CARBON-STEEL AND HADFIELD MANGANESE STEEL
    LEE, SO
    WADSWORTH, J
    SHERBY, OD
    RES MECHANICA, 1990, 31 (03): : 233 - 248
  • [42] The ultrahigh ductility of an ultrahigh carbon steel containing 3%Si
    Ruano, Oscar A.
    Oyama, Toshi
    Sherby, Oleg D.
    THERMEC 2006, PTS 1-5, 2007, 539-543 : 4801 - +
  • [43] Microstructure and Mechanical Properties of a 1.6C (pct) Ultra-fine Grained Ultra-high Carbon Steel
    Fan, Yajun
    Cao, Jimin
    Wang, Weimin
    Liu, Yongning
    NANOMATERIALS AND PLASTIC DEFORMATION, 2011, 682 : 131 - +
  • [44] The fracture toughness of a ultrahigh carbon steel containing 1.5wt%C
    Fernandez-Vicente, A.
    Carsi, M.
    Penalba, F.
    Ruano, O. A.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2006, 29 (9-10) : 817 - 828
  • [45] IMPACT PROPERTIES OF A LAMINATED COMPOSITE BASED ON ULTRAHIGH CARBON-STEEL AND BRASS
    LEE, S
    OYAMA, T
    WADSWORTH, J
    SHERBY, OD
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1992, 154 (02): : 133 - 137
  • [46] Microstructure and impact properties comparison of two ultrahigh carbon steel laminated composites
    Pozuelo, M
    Carreño, F
    Ruano, OA
    BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO, 2004, 43 (02): : 243 - 246
  • [47] Microstructures and mechanical properties of an ultrahigh carbon steel processed by the divorced eutectoid transformation
    Walser, B
    Ritter, U
    Oyama, T
    Sherby, OD
    THERMOMECHANICAL PROCESSING AND MECHANICAL PROPERTIES OF HYPEREUTECTOID STEELS AND CAST IRONS, 1996, : 67 - 78
  • [48] STRUCTURE AND PROPERTIES OF PLAIN AND ALLOYED ULTRAHIGH CARBON-STEEL WIRE ROD
    CLARKE, BD
    MCIVOR, ID
    IRONMAKING & STEELMAKING, 1991, 18 (05) : 331 - 341
  • [49] HIGH-STRAIN-RATE SUPERPLASTICITY OF BIG GRAINS IN SPRAY FORMING ULTRAHIGH CARBON STEEL CONTAIN 1.6wt.%Al(UHCS-1.6Al)
    Wang, Jun
    Shi, Hai-sheng
    Zhang, Jing-guo
    ADVANCED ENGINEERING MATERIALS II, PTS 1-3, 2012, 535-537 : 639 - +
  • [50] IMPACT PROPERTIES OF A LAMINATED COMPOSITE BASED ON ULTRAHIGH CARBON-STEEL AND A NI-SI-STEEL
    LEE, S
    WADSWORTH, J
    SHERBY, OD
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1992, 114 (03): : 278 - 281
12345