Processing and properties of ultrahigh-carbon (1.6%C) steel

被引：14
|
作者：
Zhang, Zhan-Ling [1 ]
Liu, Yong-Ning [1 ]
Zhu, Jie-Wu [1 ]
Yu, Guang [1 ]
机构：
[1] Xian Jiaotong Univ, State Key Lab Mech Behav Mat, Xian 710049, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2008年 / 483-84卷
基金：
中国国家自然科学基金;
关键词：
ultrahigh-carbon steel; ultrafine grains; mechanical properties; fracture mechanism;
D O I：
10.1016/j.msea.2006.09.145
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
An ultrahigh-carbon steel containing 1.6 wt.% carbon (UHCS-1.6C) was processed to obtain ultrafine spheroidized ferrite, pearlite and tempered martensite, respectively. The tensile properties of these structures were evaluated at room temperature. The ultimate tensile strengths of UHCS-1.6C ranged from 930 to 1570 MPa, elongations to failure from 4.4 to 19%, and yield ratios from 0.65 to 0.92. The fracture mechanisms of these structures were clarified based on an examination to the fracture surfaces. The present results indicate that ultrahigh-carbon steels can be easily processed to achieve unique microstructures and properties. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码：64 / 66
页数：3
相关论文
共 50 条
  • [31] Microstructure and mechanical properties of spray formed ultrahigh carbon steel
    School of Rare-earth Metals, Inner Mongolia University of Science and Technology, Baotou 014010, China
    不详
    Cailiao Rechuli Xuebao, 2008, 6 (70-72):
  • [32] High-strain-rate superplasticity in ultrahigh-carbon steel containing 10wt.%Al (UHCS-10Al)
    Taleff, EM
    Nagao, M
    Higashi, K
    Sherby, OD
    SCRIPTA MATERIALIA, 1996, 34 (12) : 1919 - 1923
  • [33] Microstructure and fracture properties of an ultrahigh carbon steel-mild steel laminated composite
    Carreño, F
    Chao, J
    Pozuelo, M
    Ruano, OA
    SCRIPTA MATERIALIA, 2003, 48 (08) : 1135 - 1140
  • [34] Effect of heat treatment on microstructure and mechanical properties of ultrahigh carbon steel
    School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300130, China
    不详
    Jinshu Rechuli, 2006, 5 (72-75):
  • [35] Enhancement of Superplastic Properties in Ultrahigh Carbon Steel through Silicon Addition
    Ruano, Oscar A.
    Jimenez, Jose A.
    Oyama, Toshi
    Sherby, Oleg D.
    STEEL RESEARCH INTERNATIONAL, 2009, 80 (01) : 78 - 83
  • [36] Microstructure and mechanical properties of the Al-added ultrahigh carbon steel
    Peng, HF
    Song, XY
    Gao, AG
    Ma, XL
    MATERIALS LETTERS, 2005, 59 (26) : 3330 - 3332
  • [37] Impact properties of a laminated composite based on ultrahigh carbon steel and brass
    Lee, S.
    Oyama, T.
    Wadsworth, J.
    Sherby, O.D.
    Materials Science and Engineering A, 1992, A154 (02) : 133 - 137
  • [38] Influence of interfaces on the mechanical properties of ultrahigh carbon steel multilayer laminates
    Pozuelo, Marta
    Carreno, Fernando
    Carsi, Manuel
    Ruano, Oscar A.
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2007, 98 (01) : 47 - 52
  • [39] TENSILE PROPERTIES OF LAMINATED COMPOSITES BASED ON ULTRAHIGH CARBON-STEEL
    SHYONG, L
    WADSWORTH, J
    SHERBY, OD
    JOURNAL OF COMPOSITE MATERIALS, 1991, 25 (07) : 842 - 853
  • [40] Impact properties of a laminated composite based on ultrahigh carbon steel and a Ni-Si-steel
    Lee, S.
    Wadsworth, J.
    Sherby, O.D.
    Journal of Engineering Materials and Technology, Transactions of the ASME, 1992, 114 (03): : 278 - 281
12345