Comparative Analysis of Heat Pump System with IHX Using R1234yf and R134a

被引：4

作者：

Santa, Robert ^{[1
]}

机构：

[1] Univ Dunaujvaros, Dept Mech Engn, Tancsics Mihaly U 1-a, H-2400 Dunaujvaros, Hungary

来源：

PERIODICA POLYTECHNICA-MECHANICAL ENGINEERING | 2021年 / 65卷 / 04期

关键词：

heat pump; IHX; R1234yf; R134a; COP; DROP-IN REPLACEMENT; EXERGY ANALYSIS; PERFORMANCE; EXCHANGER; R513A; R450A; ALTERNATIVES; MIXTURE; R1234ZE(E); ENERGY;

D O I：

10.3311/PPme.18390

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This research presents an energy performance analysis of the heat pump system with internal heat exchanger (IHX). The mathematical model of the heat pump outlined in this paper has been created by the author, it is steady-state with lumped parameters. The experimental validation of the model has been carried out using R1234yf and R134a as refrigerant. The aim of this work is to compare the energy performance in a wide range of operating conditions of a monitored heat pump system using both refrigerants. Finally, the heating capacity for R1234yf was lower from 0.63 % to 7.54 % compared with R134a, while the compressor power was similar from 0.12 % to 3.51 %. The COP values of R1234yf were lower than those obtained of R134a, ranging from 1.39 % to 4.22 %.

引用

页码：363 / 373

页数：11

共 50 条

[41] First experimental results of the use of R1234yf and R1234ze(E) as drop-in substitutes for R134a in a water-to-water heat pump
Molinaroli, L.
Lucchini, A.
Colombo, L. P. M.
Bocchinfuso, F.
37TH UIT HEAT TRANSFER CONFERENCE, 2020, 1599
[42] A BRIEF MODEL TO EVALUATE THE BEHAVIOUR OF R134A/R1234YF MIXTURES ON A RECIPROCATING COMPRESSOR
Barroso-Maldonado, J. M.
Belman-Flores, J. M.
Rubio-Maya, C.
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2015, VOL 6B, 2016,
[43] Performance improvement strategies of R1234yf in vapor compression refrigeration system as a R134a replacement: A review
Sharif, M. Z.
Azmi, W. H.
Ghazali, M. F.
Samykano, M.
Ali, Hafiz Muhammad
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS, 2023, 148
[44] Hot Surface Ignition and Fire Propagation Characteristics of R134a and R1234yf Refrigerants
Olson, Jon
Lambert, Steven
SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING, 2012, 5 (02) : 449 - 460
[45] Experimental study of R1234yf as a drop-in replacement for R134a in a domestic refrigerator
Belman-Flores, J. M.
Rodriguez-Munoz, A. P.
Gutierrez Perez-Reguera, C.
Mota-Babiloni, A.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2017, 81 : 1 - 11
[46] Experimental comparison of flow boiling heat transfer in smooth and microfin tubes using R134a, R1234yf, and R513A
Yasser, Zahraa Kareem
Oudah, Mahmood Hasan
INTERNATIONAL JOURNAL OF REFRIGERATION, 2024, 168 : 506 - 520
[47] Experimental and Numerical Studies on an Automobile Air Conditioning System With the Refrigerants R134a, R1234yf, and R1234ze(E)
Gurudatt, H. M.
Narasimham, G. S. V. L.
Sadashive Gowda, B.
JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 2024, 16 (01)
[48] Performance evaluation of VCR system with pure and various blends of R134a, R1234yf, and R1234ze (E) refrigerants
Kuwar, Yogendra Vasantrao
HEAT TRANSFER, 2024, 53 (06) : 2879 - 2904
[49] Exploring Low-GWP Alternatives for Heat Pumps: A Drop-in Comparative Study of R1234yf/R600a and R134a
Lombardo, Giulia
Menegazzo, Davide
Vallese, Laura
De Carli, Michele
Poletto, Fabio
Bobbo, Sergio
INTERNATIONAL JOURNAL OF THERMOPHYSICS, 2025, 46 (02)
[50] Performance analysis of refrigerants R134a and R1234yf two stage compression cycle with two condensers
Wang, Hongli
Tang, Qilong
Jia, Ning
Zhang, Qinghua
MATERIALS PROCESSING AND MANUFACTURING III, PTS 1-4, 2013, 753-755 : 2778 - +

← 1 2 3 4 5 →