EXPERIMENTAL EVALUATION OF STATIC AND FATIGUE STRENGTH OF ALUMINIUM-BASED STRUCTURAL METALLIC ALLOYS

被引：1
|
作者：
Urbaha, Margarita [1 ]
Turko, Vladislavs [1 ]
Agafonovs, Ivans [1 ]
Sorokins, Aleksandrs [2 ]
机构：
[1] Riga Tech Univ, Riga, Latvia
[2] Aviatest LTD, Riga, Latvia
来源：
19TH INTERNATIONAL SCIENTIFIC CONFERENCE ENGINEERING FOR RURAL DEVELOPMENT | 2020年
关键词：
aluminum alloys; fatigue durability; fatigue block test;
D O I：
10.22616/ERDev.2020.19.TF111
中图分类号：
S2 [农业工程];
学科分类号：
0828 ;
摘要：
The paper presents the results of the research for the static and fatigue strength of specimens made of aluminum-based high-strength alloys B95 and 1163. Specimens of different thickness sized 220 mm x 36 mm with a hole in the middle with a diameter of 6 mm have been loaded by using INSTRON 8801 and 8802 testing machines. The total sample volume worked out 400 specimens. The fatigue tests were carried out at cyclic regular loading with a frequency of 5 Hz. For the estimation of the effect of single-shot tensile and compressive static peak loads have been applied in blocks. S-N fatigue curves for various configurations of loading blocks have been plotted based on the results of the fatigue tests, the influence of various loading blocks on fatigue life have been compared for samples of two aluminum alloys.
引用
收藏
页码：487 / 493
页数：7
相关论文
共 50 条
  • [41] Experimental study on static and fatigue strength of loop joints
    Ryu, Hyung-Keun
    Kim, Young-Jin
    Chang, Sung-Pil
    ENGINEERING STRUCTURES, 2007, 29 (02) : 145 - 162
  • [42] Characterisation and tribological evaluation of a nickel surface alloyed aluminium-based material
    Sohi, MH
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 118 (1-3) : 187 - 192
  • [43] DETERMINATION OF IRON BY SOLVENT EXTRACTION .2. APPLICATION TO ALUMINIUM-BASED HARDENER ALLOYS
    JACKSON, H
    PHILLIPS, DS
    ANALYST, 1962, 87 (1038) : 718 - &
  • [44] Experimental analysis of creep and fatigue of light multifunctional aluminium alloys
    Szymczak, T.
    Kowalewski, Z. L.
    Dietrich, L.
    MATERIALS RESEARCH INNOVATIONS, 2011, 15 : S53 - S56
  • [45] Fatigue strength of aluminium alloys for vehicle safety components - State of the art
    Sonsino, CM
    Berg-Pollack, A
    Grubisic, V
    MATERIALPRUFUNG, 2005, 47 (7-8): : 404 - 410
  • [46] CORRELATION OF POROSITY DETECTED BY COMPUTED TOMOGRAPHY AND FATIGUE STRENGTH OF ALUMINIUM ALLOYS
    Pabel, Thomas
    Geier, Georg F.
    Habe, Daniel
    Rosc, Joerdis
    Schumacher, Peter
    Petkov, Tose
    TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 3: GENERAL PAPER SELECTIONS, 2011, : 803 - 805
  • [47] FATIGUE STRENGTH OF UNMACHINED EXTRUDED AND ROLLED SECTIONS OF SOME ALUMINIUM ALLOYS
    WOODWARD, AR
    METALL, 1968, 22 (03): : 219 - &
  • [48] Microstructure and properties of high strength aluminium alloys for structural applications
    A. K. Mukhopadhyay
    Transactions of the Indian Institute of Metals, 2009, 62 : 113 - 122
  • [49] Microstructure and properties of high strength aluminium alloys for structural applications
    Mukhopadhyay, A. K.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2009, 62 (02): : 113 - 122
  • [50] Effect of neutron irradiation on mechanical properties of low-activated aluminium-based alloys
    Ivanov, L.L.
    Krasnoselov, V.A.
    Platov, Yu.M.
    Tovlin, V.I.
    Toropova, L.S.
    Shamardin, V.K.
    Physics and chemistry of materials treatment, 1990, 24 (04): : 321 - 323
12345