EXPERIMENTAL EVALUATION OF STATIC AND FATIGUE STRENGTH OF ALUMINIUM-BASED STRUCTURAL METALLIC ALLOYS

被引：1
|
作者：
Urbaha, Margarita [1 ]
Turko, Vladislavs [1 ]
Agafonovs, Ivans [1 ]
Sorokins, Aleksandrs [2 ]
机构：
[1] Riga Tech Univ, Riga, Latvia
[2] Aviatest LTD, Riga, Latvia
来源：
19TH INTERNATIONAL SCIENTIFIC CONFERENCE ENGINEERING FOR RURAL DEVELOPMENT | 2020年
关键词：
aluminum alloys; fatigue durability; fatigue block test;
D O I：
10.22616/ERDev.2020.19.TF111
中图分类号：
S2 [农业工程];
学科分类号：
0828 ;
摘要：
The paper presents the results of the research for the static and fatigue strength of specimens made of aluminum-based high-strength alloys B95 and 1163. Specimens of different thickness sized 220 mm x 36 mm with a hole in the middle with a diameter of 6 mm have been loaded by using INSTRON 8801 and 8802 testing machines. The total sample volume worked out 400 specimens. The fatigue tests were carried out at cyclic regular loading with a frequency of 5 Hz. For the estimation of the effect of single-shot tensile and compressive static peak loads have been applied in blocks. S-N fatigue curves for various configurations of loading blocks have been plotted based on the results of the fatigue tests, the influence of various loading blocks on fatigue life have been compared for samples of two aluminum alloys.
引用
收藏
页码：487 / 493
页数：7
相关论文
共 50 条
  • [31] Experimental investigation for fatigue strength of a cast aluminium alloy
    Gonzalez, Rodrigo
    Martinez, Dora I.
    Alejandro Gonzalez, J.
    Talamantes, Jose
    Valtierra, Salvador
    Colas, Rafael
    INTERNATIONAL JOURNAL OF FATIGUE, 2011, 33 (02) : 273 - 278
  • [32] The effect of nitriding on fatigue strength of structural alloys
    A. A. Baikov Institute of Metallurgy and Materials Science, Russian Academy of Science, Leninskyj prospect 49, 117911 Moscow, Russia
    不详
    不详
    Mechanika, 2007, 2 (12-22):
  • [33] The effect of nitriding on fatigue strength of structural alloys
    Terent'ev, V. F.
    Michugina, M. S.
    Kolmakov, A. G.
    Kvedaras, V.
    Ciuplys, V.
    Ciuplys, A.
    Vilys, J.
    MECHANIKA, 2007, (02): : 12 - 22
  • [34] The influence of pulsed current on the structural strength of aluminium alloys
    Beklemishev, N.N.
    Baramov, Yu.V.
    Vasyutin, A.M.
    Doronin, Yu.L.
    Tananov, A.I.
    Metallovedenie i Termicheskaya Obrabotka Metallov, 1991, (03): : 15 - 17
  • [35] Structural and mechanical properties of aluminium-based composites processed by explosive compaction
    Vorozhtsov, Sergey
    Vorozhtsov, Alexander
    Kudryashova, Olga
    Zhukov, Ilya
    Promakhov, Vladimir
    POWDER TECHNOLOGY, 2017, 313 : 251 - 259
  • [36] THE CORROSION FATIGUE OF ALUMINIUM ALLOYS AS AFFECTED BY METALLIC COATINGS AND IMPRESSED CURRENTS
    不详
    CHEMISTRY & INDUSTRY, 1964, (23) : 979 - 980
  • [37] On evaluation of fatigue failure criterion of aluminium alloys based on inelastic strain energy
    Yermolaeva, NS
    Petinov, SV
    ADVANCED LIGHT ALLOYS AND COMPOSITES, 1998, 59 : 409 - 414
  • [38] The influence of scandium in effecting fragile to strong glass transition in aluminium-based alloys
    Louzguine, DV
    Sobu, S
    Inoue, A
    APPLIED PHYSICS LETTERS, 2004, 85 (17) : 3758 - 3759
  • [39] Crystallization behaviour and thermal stability of two aluminium-based metallic glass powder materials
    Li, X. P.
    Yan, M.
    Yang, B. J.
    Wang, J. Q.
    Schaffer, G. B.
    Qian, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 530 : 432 - 439
  • [40] Effects of wear on static and dynamic failure loads of aluminium-based alloy climbing karabiners
    Schambron, Thomas
    Uggowitzer, Peter
    SPORTS ENGINEERING, 2009, 11 (02) : 85 - 91
12345