High fluence nitrogen implantation in Al/Ti multilayers

被引：1

作者：

Perusko, D. ^{[1
]}

Milosavljevic, M. ^{[1
,3
]}

Milinovic, V. ^{[1
]}

Timotijevic, B. ^{[1
]}

Zalar, A. ^{[2
]}

Kovac, J. ^{[2
]}

Pracek, B. ^{[2
]}

Jeynes, C. ^{[3
]}

机构：

[1] VINCA Inst Nucl Sci, Belgrade 11001, Serbia

[2] Jozef Stefan Inst, Ljubljana 1000, Slovenia

[3] Univ Surrey, Ion Beam Ctr, Guildford GU2 7XH, Surrey, England

来源：

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS | 2008年 / 266卷 / 10期

基金：

英国工程与自然科学研究理事会;

关键词：

Al/Ti multilayers; ion implantation; hard coatings; RBS; AES; TEM;

D O I：

10.1016/j.nimb.2008.03.034

中图分类号：

TH7 [仪器、仪表];

学科分类号：

0804 ; 080401 ; 081102 ;

摘要：

We have studied the effects of high fluence nitrogen ion implantation on the structural changes in Al/Ti multilayers, with the aim of achieving multilayered metal-nitrides. The starting structures consisted of 10 alternate sputter-deposited Al and Ti films, with a total thickness of 270 nm, on (100) Si substrates. They were implanted with 200 keV N-2(+), to 1 x 10(17) and 2 x 10(17) at/cm(2), the projected range being around half-depth of the multilayers. Structural characterization was performed by Rutherford backscattering, Auger electron spectroscopy and transmission electron microscopy. It was found that ion implantation to the higher fluence induces a full intermixing of Al/Ti layers, resulting in a multilayered structure with different content of Al, Ti and N. The applied method can be interesting for preparation of graded (AI,Ti)N multilayers, with a controlled content of nitrogen and a controlled level of Al-Ti intermixing within the structures. (C) 2008 Elsevier B.V. All rights reserved.

引用

页码：2503 / 2506

页数：4

共 50 条

[21] High fluence boron implantation into polyimide
Vacík, J
Hnatowicz, V
Cervená, J
Perina, V
Popok, V
Odzhaev, V
Vink, D
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 1999, 148 (1-4): : 1126 - 1130
[22] High fluence boron implantation into polymers
Vacik, J
Cervena, J
Fink, D
Klett, R
Hnatowicz, V
Popok, V
Odzhaev, V
RADIATION EFFECTS AND DEFECTS IN SOLIDS, 1997, 143 (02): : 139 - 156
[23] Size dependent strengthening in high strength nanotwinned Al/Ti multilayers
Zhang, Y. F.
Xue, S.
Li, Q.
Li, Jin
Ding, Jie
Niu, T. J.
Su, R.
Wang, H.
Zhang, X.
ACTA MATERIALIA, 2019, 175 : 466 - 476
[24] Phase stability in Al/Ti multilayers
Banerjee, R
Zhang, XD
Dregia, SA
Fraser, HL
ACTA MATERIALIA, 1999, 47 (04) : 1153 - 1161
[25] High-fluence ion implantation of In into Al crystals: formation and evolution of buried layers
Touboltsev, VS
Dybkjaer, G
Johansen, A
Johnson, E
Sarholt, L
Andersen, HH
Olsen, M
PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 1998, 77 (02): : 341 - 354
[26] Stability of fcc Ti in thin Ti Al multilayers
Banerjee, R
Zhang, XD
Dregia, SA
Fraser, HL
ELECTRON MICROSCOPY 1998, VOL 2: MATERIALS SCIENCE 1, 1998, : 297 - 298
[27] Influence of High Fluence Nitrogen Ion Implantation on Pseudoelastic Behaviour of NiTi Shape Memory Alloy
Levintant-Zayonts, N.
Kucharski, S.
ACTA PHYSICA POLONICA A, 2011, 120 (01) : 79 - 82
[28] MODIFICATION OF CONCENTRATION PROFILES IN IRON AND ALUMINUM BY HIGH-FLUENCE IMPLANTATION OF NITROGEN AND BORON IONS
RAUSCHENBACH, B
BLASEK, G
DIETSCH, R
PHYSICA STATUS SOLIDI A-APPLIED RESEARCH, 1984, 85 (02): : 473 - 480
[29] High dose low temperature Ti and Al implantation in metals
Safonov, VI
Marchenko, IG
Kartmazov, GN
Neklyudov, IM
Dikiy, NI
SURFACE & COATINGS TECHNOLOGY, 2003, 174 : 1260 - 1263
[30] High-fluence implantation of iron into polyimide
Macková, A
Hnatowicz, V
Perina, V
Popok, VN
Khaibullin, RI
Bazarov, VV
Odzhaev, VB
SURFACE & COATINGS TECHNOLOGY, 2002, 158 : 395 - 398

← 1 2 3 4 5 →