Experimental and Finite Element Studies of Redrawing for ASS 316 at Elevated Temperatures

被引：2
|
作者：
Singh, Swadesh Kumar [1 ]
Pratoori, Raghunandan [2 ]
Paresi, Prudvi Reddy [3 ]
Kotkunde, Nitin [2 ]
Gupta, Amit Kumar [2 ]
机构：
[1] GRIET, Dept Mech Engn, Hyderabad 500072, Telangana, India
[2] BITS Pilani, Dept Mech Engn, Hyderabad 500078, Telangana, India
[3] Deakin Univ, Inst Frontier Mat, Geelong, Vic 3216, Australia
来源：
MATERIALS TODAY-PROCEEDINGS | 2017年 / 4卷 / 04期
关键词：
ASS-316; Redrawing; LDR; Thickness distribution; FE analysis; SHEET;
D O I：
10.1016/j.matpr.2017.05.037
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, experimental and Finite Element (FE) analysis has been investigated for conventional circular deep drawing and redrawing process for ASS 316 at room temperature and 200 degrees C. Initially, uni-axial tensile tests experiments have been performed to analyze the deformation behavior and material properties. Furthermore, circular blanks are deep drawn using conventional deep drawing process and then redrawn to a lower diameter. The various quantitative parameters such as Limiting Draw Ratio (LDR), thickness distribution have been evaluated. The overall LDR obtained is 2.667 at room temperature and 2.933 at 200 degrees C, which is significantly higher than the single stage draw. Additionally, these processes have been simulated using DYNAFORM software with LSDYNA server. The results of the simulations were compared with the experimental results. The FE results are shows close agreement with experimental data. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码：5274 / 5281
页数：8
相关论文
共 50 条
  • [21] EXPERIMENTAL STUDIES ON FATIGUE MECHANISM IN PURE METALS AT ELEVATED TEMPERATURES
    TAKEUCHI, S
    HOMMA, T
    SCIENCE REPORTS OF THE RESEARCH INSTITUTES TOHOKU UNIVERSITY SERIES A-PHYSICS CHEMISTRY AND METALLURGY, 1966, S 18 : 398 - &
  • [22] CONSIDERATION OF THE REDRAWING OF SHEET METALS BASED ON FINITE-ELEMENT SIMULATION
    PARSA, MH
    YAMAGUCHI, K
    TAKAKURA, N
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1994, 47 (1-2) : 87 - 101
  • [23] Experimental and finite element analysis of a hollow cylinder submitted to high temperatures
    Dal Pont, S
    Schrefler, BA
    Ehrlacher, A
    MATERIALS AND STRUCTURES, 2005, 38 (281) : 681 - 690
  • [24] Experimental and finite element analysis of a hollow cylinder submitted to high temperatures
    S. Dal Pont
    B. A. Schrefler
    A. Ehrlacher
    Materials and Structures, 2005, 38 (7) : 681 - 690
  • [25] Combined experimental and finite element studies of anisotropic friction
    Rhaiem, S
    Dammak, M
    Shirazi-Adl, A
    Mesfar, W
    Maalej, A
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2004, 20 : 11 - 14
  • [26] Finite element modelling of machining of AISI 316 steel: Numerical simulation and experimental validation
    Maranhao, C.
    Davim, J. Paulo
    SIMULATION MODELLING PRACTICE AND THEORY, 2010, 18 (02) : 139 - 156
  • [27] Numerical and experimental studies on sustainable alkali activated concretes at elevated temperatures
    Yaragal, Subhash
    Kumar, B. Chethan
    Abhinav, Manoj Uddavolu
    JOURNAL OF STRUCTURAL FIRE ENGINEERING, 2023, 14 (04) : 425 - 440
  • [28] Impact behavior of SFRC beams at elevated temperatures: Experimental and analytical studies
    Jin, Liu
    Zhang, Renbo
    Li, Liang
    Du, Xiuli
    Yao, Yunlong
    ENGINEERING STRUCTURES, 2019, 197
  • [29] Experimental and analytical studies of reinforced concrete short beams at elevated temperatures
    Fan, Shengxin
    Zhang, Yao
    Tan, Kang Hai
    ENGINEERING STRUCTURES, 2020, 212
  • [30] Experimental studies on behavior of headed stud shear connectors at elevated temperatures
    Jiang, S. (scjiang@tongji.edu.cn), 1600, Science Press (41):
12345