Experimental and Finite Element Studies of Redrawing for ASS 316 at Elevated Temperatures

被引：2
|
作者：
Singh, Swadesh Kumar [1 ]
Pratoori, Raghunandan [2 ]
Paresi, Prudvi Reddy [3 ]
Kotkunde, Nitin [2 ]
Gupta, Amit Kumar [2 ]
机构：
[1] GRIET, Dept Mech Engn, Hyderabad 500072, Telangana, India
[2] BITS Pilani, Dept Mech Engn, Hyderabad 500078, Telangana, India
[3] Deakin Univ, Inst Frontier Mat, Geelong, Vic 3216, Australia
来源：
MATERIALS TODAY-PROCEEDINGS | 2017年 / 4卷 / 04期
关键词：
ASS-316; Redrawing; LDR; Thickness distribution; FE analysis; SHEET;
D O I：
10.1016/j.matpr.2017.05.037
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, experimental and Finite Element (FE) analysis has been investigated for conventional circular deep drawing and redrawing process for ASS 316 at room temperature and 200 degrees C. Initially, uni-axial tensile tests experiments have been performed to analyze the deformation behavior and material properties. Furthermore, circular blanks are deep drawn using conventional deep drawing process and then redrawn to a lower diameter. The various quantitative parameters such as Limiting Draw Ratio (LDR), thickness distribution have been evaluated. The overall LDR obtained is 2.667 at room temperature and 2.933 at 200 degrees C, which is significantly higher than the single stage draw. Additionally, these processes have been simulated using DYNAFORM software with LSDYNA server. The results of the simulations were compared with the experimental results. The FE results are shows close agreement with experimental data. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码：5274 / 5281
页数：8
相关论文
共 50 条
  • [11] Finite element modeling of structural steel component failure at elevated temperatures
    Seif, Mina
    Main, Joseph
    Weigand, Jonathan
    McAllister, Therese P.
    Luecke, William
    STRUCTURES, 2016, 6 : 134 - 145
  • [12] Experimental studies on the properties of constructional steel at elevated temperatures
    Li, GQ
    Jiang, SC
    Yin, YZ
    Chen, K
    Li, MF
    JOURNAL OF STRUCTURAL ENGINEERING-ASCE, 2003, 129 (12): : 1717 - 1721
  • [13] Mechanical behaviour of bamboo at elevated temperatures - Experimental studies
    Gutierrez, Mateo
    Maluk, Cristian
    ENGINEERING STRUCTURES, 2020, 220
  • [14] Experimental and Numerical Investigations on Hot Deformation Behavior and Processing Maps for ASS 304 and ASS 316
    Kotkunde, Nitin
    Krishnamurthy, Hansoge Nitin
    Singh, Swadesh Kumar
    Jella, Gangadhar
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2018, 37 (9-10) : 873 - 888
  • [15] Element Size and Other Restrictions in Finite-Element Modeling of Reinforced Concrete at Elevated Temperatures
    Carstensen, Josephine Voigt
    Jomaas, Grunde
    Pankaj, Pankaj
    JOURNAL OF ENGINEERING MECHANICS, 2013, 139 (10) : 1325 - 1333
  • [16] External precast concrete nib beam-to-column connection under elevated temperatures: Experimental and finite element analysis
    Radzi, Noor Azim Mohd.
    Hamid, Roszilah
    Mutalib, Azrul A.
    Kaish, A. B. M. A.
    STRUCTURES, 2023, 57
  • [17] Formability studies of ASS 316 under different forming conditions
    Hussaini, S. M.
    Singh, Swadesh Kumar
    KumarGupta, Amit
    MATERIALS TODAY-PROCEEDINGS, 2015, 2 (4-5) : 1987 - 1995
  • [18] Finite-element simulation of axisymmetric preforms in precision forging at elevated temperatures
    Mamalis, AG
    Manolakos, DE
    Baldoukas, AK
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1996, 57 (1-2) : 103 - 111
  • [19] Experimental and numerical studies on masonry after exposure to elevated temperatures
    Bognjak, Josipa
    Gambarelli, Serena
    Sharma, Akanshu
    Meskovic, Amra
    CONSTRUCTION AND BUILDING MATERIALS, 2020, 230
  • [20] Experimental and analytical studies of steel joint components at elevated temperatures
    Spyrou, S
    Davison, B
    Burgess, I
    Plank, R
    FIRE AND MATERIALS, 2004, 28 (2-4) : 83 - 94
12345