Shear strength of anisotropic conductive adhesive joints under hygrotherrnal aging and thermal cycling

被引:25
|
作者
Gao, LiLan [1 ,2 ]
Chen, Xu [1 ]
Gao, Hong [1 ]
机构
[1] Tianjin Univ, Sch Chem Engn & Technol, Tianjin 300072, Peoples R China
[2] Tianjin Univ Technol, Sch Mech Engn, Tianjin 300191, Peoples R China
基金
中国博士后科学基金;
关键词
Anisotropic conductive adhesive film (ACF); joints; Shear property; Temperature dependence; Hygrothermal aging; Thermal cycling aging; FLIP-CHIP; BONDING PARAMETERS; FILMS ACFS; RELIABILITY PERFORMANCE; MOISTURE DIFFUSION; STRESS-ANALYSIS; EPOXY SYSTEM; BEHAVIOR; INTERCONNECTS; TEMPERATURE;
D O I
10.1016/j.ijadhadh.2011.11.007
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The shear strength behaviors of Anisotropic Conductive Adhesive Film (ACF) joints were investigated experimentally with various environments. The shear tests of ACF joints were performed at different constant temperature conditions. It is found that the shear behaviors of the ACF joints are strongly dependent on testing temperature, and the shear strength decrease and the maximum displacement increases with increasing temperature. The shear strength of ACF joints was also investigated under hygrothermal aging and thermal cycling. The results show that the shear strength of ACF joints gradually decreases at first, then quickly decreases and finally the rate of decrease slows down again with increasing hygrothermal aging time. However the shear strength of ACF joints after thermal cycling increases firstly and then decreases with increasing thermal cycling time. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码:75 / 79
页数:5
相关论文
共 50 条
  • [41] Environmental aging effects on the durability of electrically conductive adhesive joints
    Xu, SY
    Dillard, DA
    Dillard, JG
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2003, 23 (03) : 235 - 250
  • [42] Mathematical Modeling of Resistance of Conductive Adhesive Joints in Climatic Aging
    Mach, Pavel
    Lacina, Robert
    2021 IEEE 27TH INTERNATIONAL SYMPOSIUM FOR DESIGN AND TECHNOLOGY IN ELECTRONIC PACKAGING (SIITME 2021), 2021, : 160 - 164
  • [43] Thermal evaluation of the quality of electrically conductive adhesive joints
    Papez, Vaclav
    Busek, David
    2010 INTERNATIONAL CONFERENCE ON APPLIED ELECTRONICS, 2010, : 245 - 248
  • [44] Thermal and mechanical stability of electrically conductive adhesive joints
    Xiao, J
    Chung, DDL
    JOURNAL OF ELECTRONIC MATERIALS, 2005, 34 (05) : 625 - 629
  • [45] DEFORMATION AND SHEAR-STRENGTH OF FRP ADHESIVE JOINTS
    MIYAIRI, H
    FUKUDA, H
    MURAMATSU, A
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1979, (APR): : 83 - 83
  • [46] THE INFLUENCE OF LAP SIZE ON SHEAR STRENGTH OF ADHESIVE JOINTS
    Kubit, Andrzej
    Ciecinska, Barbara
    Drozd, Kamil
    ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2015, 9 (26) : 104 - 108
  • [47] Interfacial Stresses Analyses of Anisotropic Conductive Adhesive Bonding Under Thermal and Humidity Loads
    Zhang, Jun
    Chen, Xu
    Wei, Xinli
    Lin, Yong-Cheng
    JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE, 2008, 5 (08) : 1542 - 1545
  • [48] APPARATUS FOR MEASURING SHEAR STRENGTH OF ADHESIVE JOINTS AT HIGH TEMPERATURES AND METHODS FOR CONSTRUCTING ADHESIVE JOINTS
    HUMPIDGE, RT
    TAYLOR, BJ
    JOURNAL OF SCIENTIFIC INSTRUMENTS, 1967, 44 (06): : 457 - &
  • [49] Electrically conductive adhesive and soldered joints under compression
    Kim, KD
    Chung, DDL
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2005, 19 (11) : 1003 - 1023
  • [50] Bonding parameters of anisotropic conductive adhesive film and peeling strength
    Chen, X
    Zhang, J
    Jiao, CL
    Liu, YM
    ADVANCES IN FRACTURE AND STRENGTH, PTS 1- 4, 2005, 297-300 : 918 - 923