Shear strength of anisotropic conductive adhesive joints under hygrotherrnal aging and thermal cycling

被引:25
|
作者
Gao, LiLan [1 ,2 ]
Chen, Xu [1 ]
Gao, Hong [1 ]
机构
[1] Tianjin Univ, Sch Chem Engn & Technol, Tianjin 300072, Peoples R China
[2] Tianjin Univ Technol, Sch Mech Engn, Tianjin 300191, Peoples R China
基金
中国博士后科学基金;
关键词
Anisotropic conductive adhesive film (ACF); joints; Shear property; Temperature dependence; Hygrothermal aging; Thermal cycling aging; FLIP-CHIP; BONDING PARAMETERS; FILMS ACFS; RELIABILITY PERFORMANCE; MOISTURE DIFFUSION; STRESS-ANALYSIS; EPOXY SYSTEM; BEHAVIOR; INTERCONNECTS; TEMPERATURE;
D O I
10.1016/j.ijadhadh.2011.11.007
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The shear strength behaviors of Anisotropic Conductive Adhesive Film (ACF) joints were investigated experimentally with various environments. The shear tests of ACF joints were performed at different constant temperature conditions. It is found that the shear behaviors of the ACF joints are strongly dependent on testing temperature, and the shear strength decrease and the maximum displacement increases with increasing temperature. The shear strength of ACF joints was also investigated under hygrothermal aging and thermal cycling. The results show that the shear strength of ACF joints gradually decreases at first, then quickly decreases and finally the rate of decrease slows down again with increasing hygrothermal aging time. However the shear strength of ACF joints after thermal cycling increases firstly and then decreases with increasing thermal cycling time. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码:75 / 79
页数:5
相关论文
共 50 条
  • [21] Shear bond strength of two adhesive sistems before and after thermal cycling
    Borges, AB
    Rodrigues, JR
    Marsilio, AL
    JOURNAL OF DENTAL RESEARCH, 2001, 80 (04) : 1010 - 1010
  • [22] Comparative Tests of Shear Strength of Adhesive Lap Joints After Thermal Shocks
    Klonica, Mariusz
    Bielawski, Radoslaw
    Zokowski, Mariusz
    ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2021, 15 (04) : 364 - 375
  • [23] Effects of thermal cycling on shear strength of soldered joints of laminar ceramic resistor
    Xue, SB
    Wang, H
    Hu, YF
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2005, 15 : 305 - 310
  • [24] MEASUREMENT OF SHEAR STRENGTH OF ADHESIVE JOINTS IN TORSION
    BRYANT, RW
    DUKES, WA
    BRITISH JOURNAL OF APPLIED PHYSICS, 1965, 16 (01): : 101 - &
  • [25] Conductive Adhesive Joints under Combined Load
    Pavel, Mach
    Ales, Duraj
    Seba, Barto
    2016 39TH INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY (ISSE), 2016, : 241 - 244
  • [26] Bending strength of single-lap adhesive joints under hygrothermal aging combined with cyclic thermal shocks
    Hirulkar, N. S.
    Jaiswal, P. R.
    Reis, P. N. B.
    Ferreira, J. A. M.
    JOURNAL OF ADHESION, 2021, 97 (05): : 493 - 507
  • [27] Conduction efficiency and strength of electronically conductive adhesive joints
    Sancaktar, E
    Wei, Y
    Gaynes, MA
    JOURNAL OF ADHESION, 1996, 56 (1-4): : 229 - 246
  • [28] Reliability of Anisotropic Conductive Adhesive Joints in Electronic Packaging Applications
    Lin, Y. C.
    Chen, X.
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2008, 22 (14) : 1631 - 1657
  • [29] Effect of misalignment on the electrical characteristics of anisotropic conductive adhesive joints
    Fan, SH
    Chan, YC
    52ND ELECTRONIC COMPONENTS & TECHNOLOGY CONFERENCE, 2002 PROCEEDINGS, 2002, : 1605 - 1612
  • [30] Reliability of anisotropic conductive adhesive joints in electronic packaging applications
    Lin, Y.C.
    Chen, X.
    1631, VSP BV (22):