Experimental Investigation of Thermal Processes in Induction Motor by Physical Modelling

被引：0

作者：

Pugachev, Alexander ^{[1
]}

Kosmodamianskiy, Andrey ^{[2
]}

机构：

[1] Bryansk State Tech Univ, Dept Elect Radioelect & Elect Syst, Bryansk, Russia

[2] Russian Open Transport Acad, MSUT Branch, Dept Tract Rolling Stock, Moscow, Russia

来源：

2015 INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING, AUTOMATION AND CONTROL SYSTEMS (MEACS) | 2015年

关键词：

physical modelling; induction motor; thermal processes; technique of investigation; scalar control;

D O I：

10.1109/meacs.2015.7414911

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The mathematical and physical modelling are shown to be required to investigate temperature condition of traction induction motors on locomotives. The physical model of traction and auxiliary drive of locomotive developed and constructed to investigate the thermal and electromechanical and control processes is presented. The technique and results of experimental investigation of thermal processes of heating and cooling in the 14 kW induction motor fed by frequency converter with scalar control and IR-compensation under the low values of the stator current frequency and rotor speed are presented. The rotor squirrel-cage rings of the induction motor are determined to be most stressed by overheating under the stator current frequency closed to null, the stator end winding on the side opposite to air supply becomes the most overheated unit of the induction motor under higher values of the stator current frequency.

引用

页数：4

共 50 条

[41] Experimental investigation of thermal and physical properties of nanocomposites for power cable insulations
Uwa, C. A.
Abe, B.
Nnachi, A. F.
Sadiku, E. R.
Jamiru, T.
MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 823 - 829
[42] Experimental investigation on the effects of thermal treatment on the physical and mechanical properties of shale
Guo, Yide
Huang, Linqi
Li, Xibing
Chen, Jiangzhan
Sun, Jingnan
JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING, 2020, 82
[43] An experimental investigation into the physical, thermal and mechanical degradation of a polymeric bioresorbable scaffold
Fiuza, Constantino
Polak-Krasna, Katarzyna
Antonini, Luca
Petrini, Lorenza
Carroll, Oliver
Ronan, William
Vaughan, Ted J.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2022, 125
[44] Modelling a Vector Controlled Induction Motor in Simulink
Aarniovuori, Lassi
Karkkainen, Hannu
Niemela, Markku
Pyrhonen, Juha
Alalibo, Belema
Cao, Wenping
2018 X INTERNATIONAL CONFERENCE ON ELECTRICAL POWER DRIVE SYSTEMS (ICEPDS), 2018,
[45] Black-Box modelling of the induction motor
Yaacob, S
Mohamed, FA
SICE '98 - PROCEEDINGS OF THE 37TH SICE ANNUAL CONFERENCE: INTERNATIONAL SESSION PAPERS, 1998, : 883 - 886
[46] MATHEMATICAL MODELLING AND ANALYSIS OF LINEAR INDUCTION MOTOR
Rajan, Reshma
Lekshmi, A.
Krishna, Raji
Sreeja, S.
2022 IEEE INTERNATIONAL POWER AND RENEWABLE ENERGY CONFERENCE, IPRECON, 2022,
[47] Design, modelling and control of a linear induction motor
Khoidja, M. A. Nasr
Ben Salah, B.
INTERNATIONAL REVIEW OF ELECTRICAL ENGINEERING-IREE, 2007, 2 (03): : 414 - 424
[48] The analysis of thermal losses in an induction motor
Bilus, Ignacijo
Hadziselimovic, Miralem
PRZEGLAD ELEKTROTECHNICZNY, 2011, 87 (03): : 13 - 16
[49] THERMAL MODELING FOR AN INDUCTION-MOTOR
GLISES, R
MIRAOUI, A
KAUFFMANN, JM
JOURNAL DE PHYSIQUE III, 1993, 3 (09): : 1849 - 1859
[50] THERMAL PERFORMANCE ANALYSIS OF INDUCTION MOTOR
Badran, Omar
Sarhan, Hussain
Alomour, Bilal
INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY, 2012, 30 (01) : 75 - 88

← 1 2 3 4 5 →