Experimental Investigation of Thermal Processes in Induction Motor by Physical Modelling

被引：0
|
作者：
Pugachev, Alexander [1 ]
Kosmodamianskiy, Andrey [2 ]
机构：
[1] Bryansk State Tech Univ, Dept Elect Radioelect & Elect Syst, Bryansk, Russia
[2] Russian Open Transport Acad, MSUT Branch, Dept Tract Rolling Stock, Moscow, Russia
来源：
2015 INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING, AUTOMATION AND CONTROL SYSTEMS (MEACS) | 2015年
关键词：
physical modelling; induction motor; thermal processes; technique of investigation; scalar control;
D O I：
10.1109/meacs.2015.7414911
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The mathematical and physical modelling are shown to be required to investigate temperature condition of traction induction motors on locomotives. The physical model of traction and auxiliary drive of locomotive developed and constructed to investigate the thermal and electromechanical and control processes is presented. The technique and results of experimental investigation of thermal processes of heating and cooling in the 14 kW induction motor fed by frequency converter with scalar control and IR-compensation under the low values of the stator current frequency and rotor speed are presented. The rotor squirrel-cage rings of the induction motor are determined to be most stressed by overheating under the stator current frequency closed to null, the stator end winding on the side opposite to air supply becomes the most overheated unit of the induction motor under higher values of the stator current frequency.
引用
收藏
页数：4
相关论文
共 50 条
  • [21] EXPERIMENTAL RESEARCH OF THE MAGNETIZATION AND DEMAGNETIZATION PROCESSES OF THE VECTOR-CONTROLLED INDUCTION MOTOR
    Leidhold, R.
    Kaluhin, D.
    Tolochko, O.
    Technical Electrodynamics, 2024, 2024 (06): : 44 - 49
  • [22] Experimental Investigation of Thermal Storage Processes in a Thermocline Storage Tank
    Karaki, Wafaa
    Li, Peiwen
    Van Lew, Jon
    Valmiki, M. M.
    Chan, Cholik
    Stephens, Jake
    PROCEEDINGS OF THE ASME 5TH INTERNATIONAL CONFERENCE ON ENERGY SUSTAINABILITY 2011, PTS A-C, 2012, : 1389 - 1396
  • [23] NBTI: Experimental investigation, physical modelling, circuit aging simulations and verification
    Schluender, C.
    Puschkarsky, K.
    Rott, G. A.
    Gustin, W.
    Reisinger, H.
    MICROELECTRONICS RELIABILITY, 2018, 82 : 1 - 10
  • [24] Experimental Investigation on Thermal Physical Properties of an Advanced Polyester Material
    Gao Guangfa
    Yuan Shujie
    Huang Ruiyuan
    Li Yongchi
    INTERNATIONAL CONFERENCE ON SOLID STATE DEVICES AND MATERIALS SCIENCE, 2012, 25 : 333 - 338
  • [25] Visual modelling of physical processes
    Gordon, P
    24TH INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY: CONCURRENT ENGINEERING IN ELECTRONIC PACKAGING, CONFERENCE PROCEEDINGS, 2001, : 78 - 82
  • [26] Modelling of physical processes in computer
    Kasimova, A. H.
    Bisengalieva, A. M.
    Bapiyev, I. M.
    BULLETIN OF THE UNIVERSITY OF KARAGANDA-PHYSICS, 2014, 1 (73): : 89 - 95
  • [27] EXPERIMENTAL INVESTIGATION OF THE FIELD AND STRAY LOSSES OF THE END BELLS OF AN INDUCTION-MOTOR
    HU, MZ
    MCPHERSON, G
    IEEE TRANSACTIONS ON POWER APPARATUS AND SYSTEMS, 1984, 103 (06): : 1292 - 1294
  • [28] Estimation of Equivalent Circuit Parameters of Induction Motor Based on FEM with Modelling and Experimental Verification
    Gouda, E.
    El-Hayes, M.
    Abdelkader, S.
    El-Salam, G. A.
    2017 NINETEENTH INTERNATIONAL MIDDLE-EAST POWER SYSTEMS CONFERENCE (MEPCON), 2017, : 1440 - 1446
  • [29] Experimental investigation on modified vector control algorithm for induction motor asymmetry compensation
    Mamchur, Dmytro
    PRZEGLAD ELEKTROTECHNICZNY, 2020, 96 (02): : 63 - 66
  • [30] Experimental Investigation of the Losses and Efficiency of 75 kW Induction Motor Drive System
    Aarniovuori, Lassi
    Karkkainen, Hannu
    Niemela, Markku
    Cai, Kewei
    Pyrhonen, Juha
    Cao, Wenping
    45TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY (IECON 2019), 2019, : 1052 - 1058
12345