Oxidation behaviour of a Ge-modified silicide coating on an Nb-Si based alloy in the moderate temperature range

被引：32
|
作者：
Wang, Changliang [1 ]
Shao, Wei [1 ,2 ]
Wang, Wan [1 ]
Zhou, Chungen [1 ]
机构：
[1] Beijing Univ Aeronaut & Astronaut, Dept Mat Sci & Engn, Beijing 100191, Peoples R China
[2] Beijing Univ Technol, Coll Mat Sci & Engn, Beijing 100124, Peoples R China
来源：
CORROSION SCIENCE | 2020年 / 163卷
基金：
中国国家自然科学基金; 国家重点研发计划;
关键词：
Intermetallics; Oxidation; Selective oxidation; MECHANICAL-PROPERTIES; TI; CR; AL; MICROSTRUCTURE; RESISTANCE; MO; HF; COMPOSITES; DEPOSITION;
D O I：
10.1016/j.corsci.2019.108249
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The oxidation characteristics of Ge-modified silicide coating on the Nb-Si based alloy within the moderate temperatures were investigated. Results show that the mass gains of the coated alloys are 0.41, 0.58 and 0.37 mg/cm(2) after oxidation at 700 degrees C, 750 degrees C and 800 degrees C for 100 h. There is no pest phenomenon at the test temperatures. The oxide scale is composed of amorphous aluminosilica and SiO2-GeO2 with TiO2 dispersed in some of SiO2-GeO2. The good oxidation resistance of the Ge-modified silicide coating at moderate temperatures is attributed to the selective oxidation of Ti and Si, as well as the formation of glassy SiO2-GeO2.
引用
收藏
页数：8
相关论文
共 50 条
  • [41] Structure and Oxidation Behavior of Zr-Y Modified Silicide Coatings Prepared on an Nb-Ti-Si-Cr Based Ultrahigh Temperature Alloy
    Li, Xuan
    Guo, Xiping
    Qiao, Yanqiang
    OXIDATION OF METALS, 2015, 83 (3-4): : 253 - 271
  • [42] Effect of TiN diffusion barrier on interdiffusion between Mo-Si-B coating and Nb-Si based alloy
    Hou, Qingyan
    Li, Meifeng
    Chen, Zheng
    Zhou, Chungen
    MATERIALS CHEMISTRY AND PHYSICS, 2025, 337
  • [43] A novel composite Si-Mo-Ti coating with Ti concentration gradient for Nb-Si based ultrahigh temperature alloy prepared by slurry sintering
    Li, Longfei
    Guo, Xiping
    Qiao, Yanqiang
    CORROSION SCIENCE, 2023, 225
  • [44] Flow softening behavior during hot compression of a Nb-Si based ultrahigh temperature alloy
    Tang, Ye
    Guo, Xiping
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 731 : 985 - 994
  • [45] Interactions between Nb-Si based ultrahigh temperature alloy and yttria matrix mould shells
    Wang, Yin
    Guo, Xiping
    Qiao, Yanqiang
    MATERIALS & DESIGN, 2017, 116 : 461 - 471
  • [46] Oxidation and hot corrosion behaviors of Nb-Si based ultrahigh temperature alloys at 900 °C
    He, Jia-hua
    Guo, Xi-ping
    Qiao, Yan-qiang
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2021, 31 (01) : 207 - 221
  • [47] Effects of Ti Content on Microstructure and Phase Compositions of Nb-Si Based Ultrahigh Temperature Alloy
    Wang Gaoju
    Guo Xiping
    RARE METAL MATERIALS AND ENGINEERING, 2016, 45 (02) : 387 - 392
  • [48] Effect of V and Al on oxidation resistance of Nb-Si based ultrahigh temperature structural materials
    National Key Laboratory of Advanced High Temperature Structural Materials, Beijing Institute of Aeronautical Materials, Beijing 100095, China
    不详
    Hangkong Cailiao Xuebao, 2008, 5 (6-10): : 6 - 10
  • [49] The Effect of Ge Addition on the Oxidation of Nb-24Ti-18Si Silicide Based Alloys
    Li, Zifu
    Tsakiropoulos, Panos
    MATERIALS, 2019, 12 (19)
  • [50] Different oxidation protection mechanisms of HAPC silicide coating on niobium alloy over a large temperature range
    Sun, Jia
    Li, Tao
    Zhang, Guang-Peng
    Fu, Qian-Gang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 790 : 1014 - 1022
12345