Oxidation behaviour of a Ge-modified silicide coating on an Nb-Si based alloy in the moderate temperature range

被引：32
|
作者：
Wang, Changliang [1 ]
Shao, Wei [1 ,2 ]
Wang, Wan [1 ]
Zhou, Chungen [1 ]
机构：
[1] Beijing Univ Aeronaut & Astronaut, Dept Mat Sci & Engn, Beijing 100191, Peoples R China
[2] Beijing Univ Technol, Coll Mat Sci & Engn, Beijing 100124, Peoples R China
来源：
CORROSION SCIENCE | 2020年 / 163卷
基金：
中国国家自然科学基金; 国家重点研发计划;
关键词：
Intermetallics; Oxidation; Selective oxidation; MECHANICAL-PROPERTIES; TI; CR; AL; MICROSTRUCTURE; RESISTANCE; MO; HF; COMPOSITES; DEPOSITION;
D O I：
10.1016/j.corsci.2019.108249
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The oxidation characteristics of Ge-modified silicide coating on the Nb-Si based alloy within the moderate temperatures were investigated. Results show that the mass gains of the coated alloys are 0.41, 0.58 and 0.37 mg/cm(2) after oxidation at 700 degrees C, 750 degrees C and 800 degrees C for 100 h. There is no pest phenomenon at the test temperatures. The oxide scale is composed of amorphous aluminosilica and SiO2-GeO2 with TiO2 dispersed in some of SiO2-GeO2. The good oxidation resistance of the Ge-modified silicide coating at moderate temperatures is attributed to the selective oxidation of Ti and Si, as well as the formation of glassy SiO2-GeO2.
引用
收藏
页数：8
相关论文
共 50 条
  • [21] Microstructure evolution and oxidation behavior of B modified MoSi2 coating on Nb-Si based alloys
    Pang, Jie
    Wang, Wan
    Zhou, Chungen
    CORROSION SCIENCE, 2016, 105 : 1 - 7
  • [22] Hot corrosion behavior of silicide coating on an Nb-Ti-Si based ultrahigh temperature alloy
    Qiao, Yanqiang
    Guo, Xiping
    Li, Xuan
    CORROSION SCIENCE, 2015, 91 : 75 - 85
  • [23] Improvement in the oxidation resistance of Nb-Si based alloy by selective laser melting
    Guo, Yueling
    Jia, Lina
    Kong, Bin
    Zhang, Fengxiang
    Liu, Jinhui
    Zhang, Hu
    CORROSION SCIENCE, 2017, 127 : 260 - 269
  • [24] FORMATION OF Ge-Y MODIFIED SILICIDE COATINGS ON Nb-Ti-Si BASE ULTRAHIGH TEMPERATURE ALLOY
    Yang Lingxiao
    Guo Xiping
    Qiao Yanqiang
    Pan Ruobing
    ACTA METALLURGICA SINICA, 2013, 49 (11) : 1433 - 1438
  • [25] Room temperature mechanical properties and high temperature oxidation resistance of a high Cr containing Nb-Si based alloy
    Jia, L. N.
    Weng, J. F.
    Li, Z.
    Hong, Z.
    Su, L. F.
    Zhang, H.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 623 : 32 - 37
  • [26] High temperature deformation behavior of an optimized Nb-Si based ultrahigh temperature alloy
    Tang, Ye
    Guo, Xiping
    SCRIPTA MATERIALIA, 2016, 116 : 16 - 20
  • [27] Formation and oxidation resistance of MoSi2 coating for Nb-Si based alloy prepared by slurry sintering method
    Li, Longfei
    Guo, Xiping
    Qiao, Yanqiang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 938
  • [28] Structure and Oxidation Behavior of Zr–Y Modified Silicide Coatings Prepared on an Nb–Ti–Si–Cr Based Ultrahigh Temperature Alloy
    Xuan Li
    Xiping Guo
    Yanqiang Qiao
    Oxidation of Metals, 2015, 83 : 253 - 271
  • [29] Microstructural evolution and interdiffusion behavior of Mo-Si-B coating on Nb-Si based alloy
    Pi, Jinliang
    Shao, Wei
    Zhou, Chungen
    INTERMETALLICS, 2018, 95 : 150 - 156
  • [30] Microstructure and High Temperature Oxidation Performance of Silicide Coating on Nb-Based Alloy C-103
    Md. Zafir Alam
    A. Sambasiva Rao
    Dipak K. Das
    Oxidation of Metals, 2010, 73 : 513 - 530
12345