Synthesis of carbon-rich hafnia thin films by pulsed laser deposition

被引:8
|
作者
Pejakovic, Dusan A. [1 ]
Marschall, Jochen [1 ]
George, Mekha R. [2 ]
Rogers, Bridget R. [2 ]
Nieveen, Wesley R. [3 ]
Pajcini, Vasil [3 ]
机构
[1] SRI Int, Mol Phys Lab, Menlo Pk, CA 94025 USA
[2] Vanderbilt Univ, Dept Chem Engn, Nashville, TN 37235 USA
[3] Evans Analyt Grp, Sunnyvale, CA 94086 USA
关键词
Films; Transition metal oxides; Carbon; Refractories; HfO2; TEMPERATURE-RANGE; 1400-DEGREES; OXIDATION-KINETICS; SINGLE-CRYSTALS; ZIRCONIUM CARBIDE; RAMAN-SPECTRUM; POLYMER-LIKE; HFO2; CERAMICS; CRYSTALLIZATION; SPECTROSCOPY;
D O I
10.1016/j.jeurceramsoc.2010.01.009
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Carbon-rich ceramics arc an emerging class of materials with attractive high-temperature properties, including resistance to crystallization, dense microstructure, and low porosity. We explored direct synthesis of carbon-rich hafnia, which is known to form as a compact interlayer in the oxide scales of oxidized hafnium carbide. The material was synthesized by pulsed laser deposition, using pure HfO2 targets in C2H2 background gas at low pressures. Stable films up to 700 nm thick and with high molar fractions (similar to 0.1-0 45) of carbon were obtained The predominant chemical bonding of Wand 0 atoms is that of oxygen-deficient HfO2, while carbon is present in elemental or hydrogenated forms. Annealing at 600 degrees C leads to loss of most of the hydrogen from the films, which is accompanied by enhanced sp(2) bonding of carbon The films have amorphous, compact, and finely grained microstructure. Carbon molar fractions higher than similar to 0 2 inhibit microcrystallinity to at least 600 degrees C. (C) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码:2289 / 2300
页数:12
相关论文
共 50 条
  • [1] Synthesis of carbon nitride composite thin films prepared by pulsed laser deposition method
    Kumar, A
    Inturi, RB
    Ekanayake, U
    Chan, HL
    You, Q
    Wattuhewa, G
    Barnard, JA
    LAYERED MATERIALS FOR STRUCTURAL APPLICATIONS, 1996, 434 : 189 - 194
  • [2] Production of porous carbon thin films by pulsed laser deposition
    Vick, D
    Tsui, YY
    Brett, MJ
    Fedosejevs, R
    THIN SOLID FILMS, 1999, 350 (1-2) : 49 - 52
  • [3] Production of porous carbon thin films by pulsed laser deposition
    Dept. of Elec. and Comp. Engineering, University of Alberta, Edmonton, Alta. T6G 2G7, Canada
    Thin Solid Films, 1 (49-52):
  • [4] Pulsed laser deposition of silicon containing carbon thin films
    Lackner, JM
    Waldhauser, W
    Ebner, R
    Fian, A
    Jakopic, G
    Leising, G
    Schöberl, T
    SURFACE & COATINGS TECHNOLOGY, 2004, 177 : 360 - 364
  • [5] Pulsed laser deposition of multiwalled carbon nanotubes thin films
    Bonaccorso, F.
    Bongiorno, C.
    Fazio, B.
    Gucciardi, P. G.
    Marago, O. M.
    Morone, A.
    Spinella, C.
    APPLIED SURFACE SCIENCE, 2007, 254 (04) : 1260 - 1263
  • [6] Laser synthesis of carbon-rich SiC nanoribbons
    Salama, IA
    Quick, NR
    Kar, A
    JOURNAL OF APPLIED PHYSICS, 2003, 93 (11) : 9275 - 9281
  • [7] Laser synthesis of carbon-rich SiC nanoribbons
    Kar, A. (akar@creol.ucf.edu), 1600, American Institute of Physics Inc. (93):
  • [8] Synthesis and characterization of graphene thin films by pulsed laser deposition
    Wang, Jin
    Yu, Jian
    Xiong, Zhengwei
    Yin, Hongbu
    Wang, Xuemin
    Cao, Linhong
    Wu, Weidong
    Zhenkong Kexue yu Jishu Xuebao/Journal of Vacuum Science and Technology, 2015, 35 (08): : 1023 - 1027
  • [9] Control System for the Synthesis of Thin Films by Pulsed Laser Deposition
    Conde, J.
    Kuo, C.
    Silveyra, J.
    IEEE LATIN AMERICA TRANSACTIONS, 2020, 18 (02) : 438 - 445
  • [10] Control System for the Synthesis of Thin Films by Pulsed Laser Deposition
    Conde Garrido J.M.
    Kuo C.
    Silveyra J.M.
    IEEE Latin America Transactions, 2019, 18 (02): : 438 - 445