Development of real-time roughness monitoring during painting proses for cold rolled steel for national electric vehicle body materials

被引：0
|
作者：
Supriadi, Sugeng [1 ]
Istiyanto, Jos [1 ]
Kiswanto, Gandjar [1 ]
Baskoro, Ario Sunar [1 ]
Danardono, A. S. [1 ]
Aji, Bagaskara [1 ]
机构：
[1] Univ Indonesia, Dept Mech Engn, Kampus Baru UI Depok, Jakarta, Indonesia
来源：
2014 International Conference on Electrical Engineering and Computer Science (ICEECS) | 2014年
关键词：
real-time monitoring; Image processing; Vehicle outer body panels; SYSTEM;
D O I：
暂无
中图分类号：
TP301 [理论、方法];
学科分类号：
081202 ;
摘要：
Automaker in Indonesia still using imported steel sheet especially for outer body panels. It is caused by quality of local steel sheet finishing performance. Therefore in this paper is conducted to implement real-time roughness monitoring system for painting process using local steel sheet. The monitoring is based on image processing technique to mimic human analysis to estimate roughness based on the reflective pattern. Verification of the image processing is compared with roughness measurement. The result shows that image processing technique give promising result. However optimization on image processing algorithm is necessary to optimise its potential.
引用
收藏
页码：294 / 297
页数：4
相关论文
共 50 条
  • [21] Development of Dynamic Model for Real-Time Monitoring of Ripening Changes of Kimchi during Distribution
    Kim, Ji-Young
    Kim, Byeong-Sam
    Kim, Jong-Hoon
    Oh, Seung-Il
    Koo, Junemo
    FOODS, 2020, 9 (08)
  • [22] Real-Time In Situ Neutron Diffraction Investigation of Phase-Specific Load Sharing in a Cold-Rolled TRIP Sheet Steel
    Dunji Yu
    Lu Huang
    Yan Chen
    Piyamanee Komolwit
    Ke An
    JOM, 2018, 70 : 1576 - 1586
  • [23] Real-time monitoring of stress development during electrochemical cycling of electrode materials for Li-ion batteries: overview and perspectives
    Jangid, Manoj K.
    Mukhopadhyay, Amartya
    JOURNAL OF MATERIALS CHEMISTRY A, 2019, 7 (41) : 23679 - 23726
  • [24] Real-Time Investigation of Recovery, Recrystallization and Austenite Transformation during Annealing of a Cold-Rolled Steel Using High Energy X-ray Diffraction (HEXRD)
    Moreno, Marc
    Teixeira, Julien
    Geandier, Guillaume
    Hell, Jean-Christophe
    Bonnet, Frederic
    Salib, Mathieu
    Allain, Sebastien Y. P.
    METALS, 2019, 9 (01)
  • [25] Implementation of Electronic Throttle-by-Wire for a Hybrid Electric Vehicle using National Instruments' CompactRIO and LabVIEW Real-Time
    Zulkifli, Saiful A.
    Asirvadam, Vijanth S.
    Saad, Nordin
    Aziz, A. Rashid A.
    Mohideen, A. Azeem M.
    2014 5TH INTERNATIONAL CONFERENCE ON INTELLIGENT AND ADVANCED SYSTEMS (ICIAS 2014), 2014,
  • [26] Development of a real-time radiological area monitoring network for emergency response at Lawrence Livermore National Laboratory
    Bertoldo, NA
    Hunter, SL
    Fertig, RA
    Laguna, GW
    MacQueen, DH
    IEEE SENSORS JOURNAL, 2005, 5 (04) : 565 - 573
  • [27] Development of a wireless inspection and notification system with minimum monitoring hardware for real-time vehicle engine health inspection
    Wong, Pak Kin
    Vong, Chi Man
    Wong, Ka In
    Ma, Zi-Qian
    TRANSPORTATION RESEARCH PART C-EMERGING TECHNOLOGIES, 2015, 58 : 29 - 45
  • [28] Development and Implementation of a Micro-electric Discharge Machine: Real-Time Monitoring System of Fabrication of Nanosilver Colloid
    Kuo Hsiung Tseng
    Yi-Syuan Kao
    Chaur-Yang Chang
    Journal of Cluster Science, 2016, 27 : 763 - 773
  • [29] Development and Implementation of a Micro-electric Discharge Machine: Real-Time Monitoring System of Fabrication of Nanosilver Colloid
    Tseng, Kuo Hsiung
    Kao, Yi-Syuan
    Chang, Chaur-Yang
    JOURNAL OF CLUSTER SCIENCE, 2016, 27 (02) : 763 - 773
  • [30] Real-time and in situ monitoring of ferroelectric domains during periodic electric field poling of KTiOPO4
    Hellström, J
    Clemens, R
    Pasiskevicius, V
    Karlsson, H
    Laurell, F
    JOURNAL OF APPLIED PHYSICS, 2001, 90 (03) : 1489 - 1495
12345