Boriding of Binary Ni-Ti and Ternary Ni-Ti-Cu Shape Memory Alloys

被引：1
|
作者：
Ucar, N. [1 ]
Turku, N. [1 ]
Ozdemir, A. F. [1 ]
Calik, A. [2 ]
机构：
[1] Suleyman Demirel Univ, Fac Arts & Sci, Dept Phys, Isparta, Turkey
[2] Suleyman Demirel Univ, Fac Technol, Dept Mfg Engn, Isparta, Turkey
来源：
ACTA PHYSICA POLONICA A | 2016年 / 130卷 / 01期
关键词：
MECHANICAL-PROPERTIES; WEAR BEHAVIOR; CAST IRONS; THIN-FILMS; STEELS; KINETICS;
D O I：
10.12693/APhysPolA.130.492
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
In this work, the boriding of binary (Ni-Ti) and ternary (Ni-Ti-Cu) shape memory alloys was carried out in a solid medium at 1173 K for 8 h using the powder pack method with Ekabor-Ni powders. Characterization of boride layer formed on the surface of alloys was identified by optical microscopy and scanning electron microscopy. TiB2, NiB2 and SiC phases in the boride layer of borided binary (Ni-Ti) and ternary (Ni-Ti-Cu) shape memory alloys was confirmed by X-ray diffraction analysis. The microhardness and thickness of the boride layers were measured. The obtained hardness values show a hardness anomaly due to porosity and structural defects with increase of Cu content, while a decrease in the value of hardness moving from the boride layer to main structure was observed.
引用
收藏
页码：492 / 495
页数：4
相关论文
共 50 条
  • [41] Thermodynamics of martensite transformation hysteresis in Ni-Ti shape memory alloys
    Jia, D
    Han, M
    Liu, WX
    Wang, DF
    Dong, ZZ
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2000, 10 (03) : 411 - 413
  • [42] Thermoelastic analysis of phase transition in Ni-Ti shape memory alloys
    Santulli, C
    JOURNAL OF MATERIALS SCIENCE LETTERS, 2000, 19 (12) : 1071 - 1072
  • [43] The self accommodating martensitic microstructure of Ni-Ti shape memory alloys
    Madangopal, K
    ACTA MATERIALIA, 1997, 45 (12) : 5347 - 5365
  • [44] Quantitative analysis: Of phase transformation in Ni-Ti shape memory alloys
    Kimiecik, M.
    Jones, J.W.
    Daly, S.
    Kimiecik, M. (mkimieci@umich.edu), 1600, ASM International (171): : 21 - 24
  • [45] A recent development in producing porous Ni-Ti shape memory alloys
    Li, BY
    Rong, LJ
    Li, YY
    Gjunter, VE
    INTERMETALLICS, 2000, 8 (08) : 881 - 884
  • [46] Influence of thermomechanical cycling on the shape memory characteristics of Ni-Ti alloys
    Scherngell, H
    Kneissl, AC
    EUROMAT 97 - PROCEEDINGS OF THE 5TH EUROPEAN CONFERENCE ON ADVANCED MATERIALS AND PROCESSES AND APPLICATIONS: MATERIALS, FUNCTIONALITY & DESIGN, VOL 3: SURFACE ENGINEERING AND FUNCTIONAL MATERIALS, 1997, : 603 - 606
  • [47] Characterization of Ni-Ti shape memory alloys prepared by powder metallurgy
    Jabur, Adnan S.
    Al-Haidary, Jafar T.
    Al-Hasani, Emad S.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 578 : 136 - 142
  • [48] Mechanical Behaviour of Ausformed and Marformed Ti-rich Ni-Ti Shape Memory Alloys
    Paula, A. S.
    Mahesh, K. K.
    Santos, C. M. L.
    Fernandes, F. M. Braz
    Viana, C. S. C.
    ADVANCED MATERIALS FORUM IV, 2008, 587-588 : 635 - +
  • [49] The Effect of Copper Alloying Element on the Corrosion Characteristics of Ti-Ni and Ternary Ni-Ti-Cu Meltspun Shape Memory Alloy Ribbons in 0.9% NaCl Solution
    Craciunescu, Corneliu
    Hamdy, Abdel Salam
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2013, 8 (08): : 10320 - 10334
  • [50] Study on the Mechanical Properties of Ni-Ti-Cu Shape Memory Alloy Considering Different Cu Contents
    Liu, Bingfei
    Hao, Yangjie
    CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, 2022, 131 (03): : 1601 - 1613
12345