Boriding of Binary Ni-Ti and Ternary Ni-Ti-Cu Shape Memory Alloys

被引：1

作者：

Ucar, N. ^{[1
]}

Turku, N. ^{[1
]}

Ozdemir, A. F. ^{[1
]}

Calik, A. ^{[2
]}

机构：

[1] Suleyman Demirel Univ, Fac Arts & Sci, Dept Phys, Isparta, Turkey

[2] Suleyman Demirel Univ, Fac Technol, Dept Mfg Engn, Isparta, Turkey

来源：

ACTA PHYSICA POLONICA A | 2016年 / 130卷 / 01期

关键词：

MECHANICAL-PROPERTIES; WEAR BEHAVIOR; CAST IRONS; THIN-FILMS; STEELS; KINETICS;

D O I：

10.12693/APhysPolA.130.492

中图分类号：

O4 [物理学];

学科分类号：

0702 ;

摘要：

In this work, the boriding of binary (Ni-Ti) and ternary (Ni-Ti-Cu) shape memory alloys was carried out in a solid medium at 1173 K for 8 h using the powder pack method with Ekabor-Ni powders. Characterization of boride layer formed on the surface of alloys was identified by optical microscopy and scanning electron microscopy. TiB2, NiB2 and SiC phases in the boride layer of borided binary (Ni-Ti) and ternary (Ni-Ti-Cu) shape memory alloys was confirmed by X-ray diffraction analysis. The microhardness and thickness of the boride layers were measured. The obtained hardness values show a hardness anomaly due to porosity and structural defects with increase of Cu content, while a decrease in the value of hardness moving from the boride layer to main structure was observed.

引用

页码：492 / 495

页数：4

共 50 条

[31] SHAPE DETERIORATION AND REVERSIBLE SHAPE-MEMORY EFFECT IN NI-TI ALLOYS
EDO, S
JOURNAL OF MATERIALS SCIENCE, 1989, 24 (11) : 3991 - 3993
[32] DETECTION OF THE R-PHASE IN NI-TI SHAPE MEMORY ALLOYS
GOUBAA, K
MASSE, M
BOUQUET, G
JOURNAL DE PHYSIQUE IV, 1991, 1 (C4): : 361 - 366
[33] Thermodynamics of martensite transformation hysteresis in Ni-Ti shape memory alloys
JIA Di(贾堤) 1
2. Department of Fundamental S
TransactionsofNonferrousMetalsSocietyofChina, 2000, (03) : 411 - 413
[34] Development of Ni-Ti based shape memory alloys for actuation and control
Zhang, C
Zee, RH
Thoma, PE
IECEC 96 - PROCEEDINGS OF THE 31ST INTERSOCIETY ENERGY CONVERSION ENGINEERING CONFERENCE, VOLS 1-4, 1996, : 239 - 244
[35] Isothermal and athermal martensitic transformations in Ni-Ti shape memory alloys
Kustov, S.
Salas, D.
Cesari, E.
Santamarta, R.
Van Humbeeck, J.
ACTA MATERIALIA, 2012, 60 (6-7) : 2578 - 2592
[36] Characterization of Ni-Ti shape memory alloys prepared by powder metallurgy
Jabur, Adnan S., 1600, Elsevier Ltd (578):
[37] Quantitative Analysis of Phase Transformation in Ni-Ti Shape Memory Alloys
Kimiecik, M.
Jones, J. W.
Daly, S.
ADVANCED MATERIALS & PROCESSES, 2013, 171 (04): : 21 - 24
[38] TECHNOLOGY OF FABRICATION IN RELATION TO MICROSTRUCTURE OF Ni-Ti SHAPE MEMORY ALLOYS
Szurman, I.
Kursa, M.
JOURNAL OF MINING INSTITUTE, 2008, 174 : 151 - 152
[39] Influence of iridium on the martensitic transformation in Ni-Ti shape memory alloys
Somsen, C
Khalil-Allafi, J
George, EP
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 378 (1-2): : 170 - 174
[40] PLANAR RF ANTENNA RECONFIGURATION WITH NI-TI SHAPE MEMORY ALLOYS
Wolcott, P. J.
Dapino, M. J.
Wang, Z.
Zhang, L.
PROCEEDINGS OF THE ASME CONFERENCE ON SMART MATERIALS, ADAPTIVE STRUCTURES AND INTELLIGENT SYSTEMS (SMASIS 2011), VOL 1, 2012, : 659 - +

← 1 2 3 4 5 →