Demonstration of a solar combi-system utilizing stable supercooling of sodium acetate trihydrate for heat storage

被引:26
|
作者
Englmair, Gerald [1 ,2 ]
Kong, Weiqiang [1 ]
Berg, Jakob Brinko [1 ]
Furbo, Simon [1 ]
Fan, Jianhua [1 ]
机构
[1] Tech Univ Denmark, Dept Civil Engn, Brovej 118, DK-2800 Lyngby, Denmark
[2] Univ Chinese Acad Sci, Sino Danish Ctr, 380 Huaibeizhuang, Beijing, Peoples R China
关键词
Solar heating system; System demonstration; Control strategy; Heat storage prototype; Phase change material; Stable supercooling; THERMAL-ENERGY STORAGE; PHASE-CHANGE MATERIALS; HOT-WATER TANK; ACTIVE-HOUSES; DRUM REACTOR; IMPROVEMENT; COMPOSITES; SOLIDIFICATION; SIMULATIONS; UNITS;
D O I
10.1016/j.applthermaleng.2019.114647
中图分类号
O414.1 [热力学];
学科分类号
摘要
Achieving a high fraction of solar heat in heat supply for domestic buildings would reduce the use of fossil fuels for heat generation and has been a goal for a long time. Combined short and long-term heat storage has been identified as one way of achieving solar fractions higher than 50 percent in heat supply for domestic buildings. To this end, a laboratory solar heating system was built with heat-pipe tubular collectors 22.4 m(2) in aperture and a heat-storage prototype consisting of a 735 L water tank and four PCM units each containing 200 kg sodium acetate trihydrate (SAT) composite. The SAT composite was utilized as sensible heat storage with the additional ability to release heat of fusion on demand. Operation was demonstrated with the space heating and hot water demand patterns of a standard-size Passive House in the Danish climate. A strategy was developed to control the system. Seven operation modes enabled combined charging of water tank and PCM units, heat transfer from PCM units to the water tank when heat was in demand, and the right timing of auxiliary heating. We present the controller settings identified and the heat transfer fluid flow rates applied. Sequences of water tank charging, and single and parallel PCM unit charging were used to match the collector power available and the heat transfer limitations of the stores. During the charging of PCM units, the flow temperature was kept between 70 and 95 degrees C to allow continuous heat transfer rates of up to 16 kW. Peaks of up to 36 kW occurred when PCM units were added to the charging circuit. During heat transfer from PCM units to the water tank, flow temperatures were close to the SAT composite temperature and thermal power of up to 6 kW was measured. The heat stores were efficiently utilized in spring and autumn. The developed control strategy and measurement data from system demonstration will form the basis for numerical performance investigations.
引用
收藏
页数:12
相关论文
共 50 条
  • [41] Laboratory testing of solar combi system with compact long term PCM heat storage
    Johansen, Jakob Berg
    Englmair, Gerald
    Dannemand, Mark
    Kong, Weiqiang
    Fan, Jianhua
    Dragsted, Janne
    Perers, Bengt
    Furbo, Simon
    PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON SOLAR HEATING AND COOLING FOR BUILDINGS AND INDUSTRY (SHC 2015), 2016, 91 : 330 - 337
  • [42] Crystallization by local cooling of supercooled sodium acetate trihydrate composites for long-term heat storage
    Englmair, Gerald
    Jiang, Yiliang
    Dannemand, Mark
    Moser, Christoph
    Schranzhofer, Hermann
    Furbo, Simon
    Fan, Jianhua
    ENERGY AND BUILDINGS, 2018, 180 : 159 - 171
  • [43] Investigations of the corrosion behaviour of special heat exchanging materials in sodium acetate trihydrate melt for the application latent heat storage
    Brandt, B
    Stimming, U
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2004, 55 (06): : 457 - 463
  • [44] Mechanism of electrical nucleation in a latent heat storage device with supercooled aqueous solution of sodium acetate trihydrate
    Sakurai, Katsuyuki
    Sano, Kenji
    JOURNAL OF CRYSTAL GROWTH, 2019, 516 : 21 - 33
  • [45] Experimental and numerical study of a latent heat storage using sodium acetate trihydrate for short and long term applications
    Wang, Gang
    Xu, Chao
    Englmair, Gerald
    Kong, Weiqiang
    Fan, Jianhua
    Furbo, Simon
    Wei, Gaosheng
    JOURNAL OF ENERGY STORAGE, 2022, 47
  • [46] AN INVESTIGATION INTO THE USE OF THE EUTECTIC MIXTURE SODIUM-ACETATE TRIHYDRATE TARTARIC ACID FOR LATENT-HEAT STORAGE
    LI, JH
    ZHOU, JK
    HUANG, SX
    THERMOCHIMICA ACTA, 1991, 188 (01) : 17 - 23
  • [47] Expanded graphite/disodium hydrogen phosphate/sodium acetate trihydrate stabilized composite phase change material for heat storage
    Ji, Xu
    Li, Haiti
    Leng, Congbin
    Li, Ming
    Fan, Rongkang
    Liu, Jiaxing
    JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY, 2016, 11 (02):
  • [48] Effect of embedding sodium acetate trihydrate on the Ag anode in an electrical nucleation cell of a supercooled latent heat storage material
    Sakurai, Katsuyuki
    Yoshinaga, Norihiro
    Yagi, Ryosuke
    Tomimatsu, Norihiro
    Sano, Kenji
    SOLAR ENERGY, 2018, 173 : 1306 - 1314
  • [49] THERMOANALYTICAL INVESTIGATION OF SODIUM-ACETATE TRIHYDRATE FOR APPLICATION AS A LATENT-HEAT THERMAL-ENERGY STORAGE MATERIAL
    NAUMANN, R
    FANGHANEL, T
    EMONS, HH
    JOURNAL OF THERMAL ANALYSIS, 1988, 33 (03): : 685 - 688
  • [50] Experimental investigation of high performance composite phase change materials based on sodium acetate trihydrate for solar thermal energy storage
    Fang, Guihua
    Zhang, Wentao
    Yu, Menghuan
    Meng, Keke
    Tan, Xin
    SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2022, 234