Minimum Quantity Lubrication: Influence of the oil nature on surface integrity

被引：17
|
作者：
Werda, Sana [1 ,2 ]
Duchosal, Arnaud [1 ]
Le Quilliec, Guenhael [1 ]
Morandeau, Antoine [2 ]
Leroy, Rene [1 ]
机构：
[1] Univ Tours, 7 Ave Marcel Dassault, F-37200 Tours, France
[2] Sandvik Coromant, Rue Henri Garih, F-37230 Fondettes, France
来源：
3RD CIRP CONFERENCE ON SURFACE INTEGRITY | 2016年 / 45卷
关键词：
MQL; Milling tool; Synthetic ester; Fatty alcohol; Surface roughness; Tool life; CUTTING FLUID; STEEL;
D O I：
10.1016/j.procir.2016.02.330
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Minimum Quantity Lubrication (MQL) is a lubrication method in machining field. It consists in spraying very small amount of oil to the cutting edge with compressed air. This technique decreases friction between chip and the cutting face of the tool which leads to better surface finish and tool life. Well-chosen oil will give best results on surface integrity. Regarding the choice of oil, this paper aims to identify the evolution of tool temperature, tool wear, surface roughness and cutting forces in milling process. The influence of two oils (synthetic ester and fatty alcohol) is investigated and compared with dry machining. (C) 2016 The Authors. Published by Elsevier B.V.
引用
收藏
页码：287 / 290
页数：4
相关论文
共 50 条
  • [41] Modeling and simulation of nanofluid minimum quantity lubrication surface grinding thermal stress
    Zhang, Yanbin
    Li, Changhe
    Yang, Min
    Jia, Dongzhou
    Zhang, Dongkun
    Zhang, Xiaowei
    Open Mechanical Engineering Journal, 2015, 9 (01): : 761 - 768
  • [42] A study of plane surface grinding under minimum quantity lubrication (MQL) conditions
    Barczak, L. M.
    Batako, A. D. L.
    Morgan, M. N.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2010, 50 (11): : 977 - 985
  • [43] A novel study on the influence of graphene-based nanofluid concentrations on the response characteristics and surface-integrity of Hastelloy C-276 during minimum quantity lubrication
    Singh, Gurpreet
    Sharma, Shubham
    Seikh, A. H.
    Li, Changhe
    Zhang, Yanbin
    Rajkumar, S.
    Kumar, Abhinav
    Singh, Rajesh
    Eldin, Sayed M.
    HELIYON, 2023, 9 (09)
  • [44] Influence of the parameters of a minimum quantity lubrication system on micro milling process results
    Sonja Kieren-Ehses
    Tobias Mayer
    Benjamin Kirsch
    Jan C. Aurich
    The International Journal of Advanced Manufacturing Technology, 2023, 127 : 5279 - 5292
  • [45] Measurement of Lubricant Oil Film Thickness upon Minimum Quantity Lubrication Drilling Process
    Jie, Ho Yong
    Sani, Amiril Sahab Abdul
    Ali, Afifah Mohd
    Rosli, Nurrina
    INTELLIGENT MANUFACTURING AND MECHATRONICS, SIMM 2023, 2024, : 411 - 420
  • [46] Heat transfer characteristics of successive oil droplet impingement under minimum quantity lubrication
    Zheng, Nan
    Tong, Baohong
    Zhang, Guotao
    Hu, Xiaolei
    Liang, He
    Wang, Wei
    Liu, Kun
    PHYSICS OF FLUIDS, 2021, 33 (03)
  • [47] Experimental observation of oil mist penetration ability in minimum quantity lubrication (MQL) spray
    Zhu, Guangyuan
    Yuan, Songmei
    Kong, Xiaoyao
    Zhang, Chong
    Chen, Bochuan
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2020, 34 (08) : 3217 - 3225
  • [48] Performance assessment of vegetable oil-based minimum quantity lubrication (MQL) in drilling
    Khunt, C. P.
    Makhesana, M. A.
    Patel, K. M.
    Mawandiya, B. K.
    MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 341 - 345
  • [49] Experimental observation of oil mist penetration ability in minimum quantity lubrication (MQL) spray
    Guangyuan Zhu
    Songmei Yuan
    Xiaoyao Kong
    Chong Zhang
    Bochuan Chen
    Journal of Mechanical Science and Technology, 2020, 34 : 3217 - 3225
  • [50] Effect of different grinding fluids applied in minimum quantity cooling-lubrication mode on surface integrity in cBN grinding of Inconel 718
    Naskar, Anirban
    Singh, Biddu Bhushan
    Choudhary, Amit
    Paul, S.
    JOURNAL OF MANUFACTURING PROCESSES, 2018, 36 : 44 - 50
12345