Minimum Quantity Lubrication: Influence of the oil nature on surface integrity

被引：17
|
作者：
Werda, Sana [1 ,2 ]
Duchosal, Arnaud [1 ]
Le Quilliec, Guenhael [1 ]
Morandeau, Antoine [2 ]
Leroy, Rene [1 ]
机构：
[1] Univ Tours, 7 Ave Marcel Dassault, F-37200 Tours, France
[2] Sandvik Coromant, Rue Henri Garih, F-37230 Fondettes, France
来源：
3RD CIRP CONFERENCE ON SURFACE INTEGRITY | 2016年 / 45卷
关键词：
MQL; Milling tool; Synthetic ester; Fatty alcohol; Surface roughness; Tool life; CUTTING FLUID; STEEL;
D O I：
10.1016/j.procir.2016.02.330
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Minimum Quantity Lubrication (MQL) is a lubrication method in machining field. It consists in spraying very small amount of oil to the cutting edge with compressed air. This technique decreases friction between chip and the cutting face of the tool which leads to better surface finish and tool life. Well-chosen oil will give best results on surface integrity. Regarding the choice of oil, this paper aims to identify the evolution of tool temperature, tool wear, surface roughness and cutting forces in milling process. The influence of two oils (synthetic ester and fatty alcohol) is investigated and compared with dry machining. (C) 2016 The Authors. Published by Elsevier B.V.
引用
收藏
页码：287 / 290
页数：4
相关论文
共 50 条
  • [31] Influence of Cutting Speed on the Hob Wear in Hobbing with the Minimum Quantity Lubrication
    Stachurski, Wojciech
    Kruszynski, Bogdan
    TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2020, 27 (02): : 341 - 345
  • [32] Application of Minimum Quantity Lubrication in Grinding
    Barczak, Lukasz M.
    Batako, Andre D.
    MATERIALS AND MANUFACTURING PROCESSES, 2012, 27 (04) : 406 - 411
  • [33] Dry machining and minimum quantity lubrication
    Weinert, K
    Inasaki, I
    Sutherland, JW
    Wakabayashi, T
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2004, 53 (02) : 511 - 537
  • [34] A comprehensive study on minimum quantity lubrication
    Kumar, Santosh
    Kumar, Rakesh
    Singh, Swarn
    Singh, Harvinder
    Kumar, Amresh
    Goyal, Rachin
    Singh, Sham
    MATERIALS TODAY-PROCEEDINGS, 2022, 56 : 3078 - 3085
  • [35] Feasibility of supercritical CO2-based minimum quantity lubrication to improve the surface integrity of 50% Sip/Al composites
    Yu, Weiwei
    Chen, Jie
    Ming, Weiwei
    An, Qinglong
    Chen, Ming
    JOURNAL OF MANUFACTURING PROCESSES, 2022, 73 : 364 - 374
  • [36] Formation mechanism of blade surface integrity based on hybrid process of cryogenic minimum quantity lubrication and ultrasonic rolling strengthening process
    Zheng, Yang
    Wu, Dongbo
    Wang, Hui
    Lv, Hongru
    Yu, Jie
    Liu, Xueping
    MATERIALS & DESIGN, 2024, 245
  • [37] Influence of optimized lubrication-cooling and minimum quantity lubrication on the cutting forces, on the geometric quality of the surfaces and on the micro-structural integrity of hardened steel parts
    Alves, M. C. S.
    Bianchi, E. C.
    Aguiar, P. R.
    Canarim, R. C.
    MATERIA-RIO DE JANEIRO, 2011, 16 (03): : 754 - 766
  • [38] Influence of graphene-based nanofluid with minimum quantity lubrication on surface roughness and cutting temperature in turning operation
    Singh, Rabesh Kumar
    Sharma, Anuj Kumar
    Bishwajeet
    Mandal, Vimal
    Gaurav, Kumar
    Nag, Akash
    Kumar, Amit
    Dixit, Amit Rai
    Mandal, Amitava
    Das, Alok Kumar
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (11) : 24578 - 24586
  • [39] Effects of targeted Minimum Quantity Fluid (MQF) application on surface integrity
    Rakurty, C. S.
    Varela, P. I.
    Balaji, A. K.
    14TH CIRP CONFERENCE ON MODELING OF MACHINING OPERATIONS (CIRP CMMO), 2013, 8 : 462 - 468
  • [40] Influence of the parameters of a minimum quantity lubrication system on micro milling process results
    Kieren-Ehses, Sonja
    Mayer, Tobias
    Kirsch, Benjamin
    Aurich, Jan C.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 127 (11-12): : 5279 - 5292
12345