Optimization of brazing process parameters in butt joint of brass 319 using Taguchi method

被引：21
|
作者：
Stalin, B. [1 ]
Ravichandran, M. [2 ]
Vadivel, K. [1 ]
Vairamuthu, J. [3 ]
机构：
[1] Anna Univ, Dept Mech Engn, Reg Campus Madurai, Madurai 625019, Tamil Nadu, India
[2] K Ramakrishnan Coll Engn, Dept Mech Engn, Trichy 621112, India
[3] Sethu Inst Technol, Dept Mech Engn, Pulloor 626115, Kariapatti, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2020年 / 21卷
关键词：
Brazing; Brass; 319; L9 orthogonal array; Taguchi method; S/N ratio; ANOVA; WELDING PROCESS PARAMETERS; MECHANICAL-PROPERTIES; ATTAIN; STRENGTH; MICROSTRUCTURE; STEEL; BEAM;
D O I：
10.1016/j.matpr.2019.04.226
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Brazing is the metal joining processes of melting a filler metal into the joint, the filler metal having a lower melting point than the adjoining metal. The oxyacetylene brazing processes are executed with 18 brass plates, where each pair of same plates is joined together as butt joint. The copper flux powder is used, in order to control the oxidation during brazing processes. Brazed brass 319 joints are tested for the tensile and impact strength observation. The objective of this work is to optimize the process parameters involved in brazing processes using Taguchi optimization with L9 orthogonal array, signal to noise ratio and analysis of variance. The optimization processes are executed using MATLAB software. The obtained results will be helpful to the brazing industries to join the brass plates. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：237 / 243
页数：7
相关论文
共 50 条
  • [41] Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method
    S. S. Mahapatra
    Amar Patnaik
    The International Journal of Advanced Manufacturing Technology, 2007, 34 : 911 - 925
  • [42] Optimization of hot embossing molding process parameters of Fresnel lens using Taguchi method
    Kuo, C. -C.
    Chen, B. -C.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2015, 46 (09) : 942 - 948
  • [43] Process Parameters Optimization for Friction Stir Welding of Pure Aluminium to Brass (CuZn30) using Taguchi Technique
    Elfar, O. M. R.
    Rashad, R. M.
    Megahed, H.
    2016 4TH INTERNATIONAL CONFERENCE ON NANO AND MATERIALS SCIENCE (ICNMS 2016), 2016, 43
  • [44] Optimization of laser peening parameters using Taguchi method
    Sun, Y. Q.
    Zhou, J. Z.
    Chen, Y. B.
    Huang, S.
    E-ENGINEERING & DIGITAL ENTERPRISE TECHNOLOGY, 2008, 10-12 : 692 - 696
  • [45] Parameters Optimization for Sustainable Machining by using Taguchi Method
    Singh, Karmjit
    Sultan, Ibrahim
    MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 4217 - 4226
  • [46] Optimizing the process parameters of ECM using Taguchi method
    Khundrakpam, Nimo Singh
    Brar, Gurinder Singh
    Devi, Maibam Bindya
    MATERIALS TODAY-PROCEEDINGS, 2020, 26 : 1373 - 1379
  • [47] Societal Application of Taguchi Method for Optimization of Process Parameters in the Melting Process in the Foundry
    Deshmukh, Ranjitsinh
    Hiremath, Rahul
    TECHNO-SOCIETAL 2018: PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ADVANCED TECHNOLOGIES FOR SOCIETAL APPLICATIONS - VOL 2, 2020, : 215 - 221
  • [48] Optimization of squeeze casting process parameters using Taguchi analysis
    Vijian, P.
    Arunachalam, V.P.
    International Journal of Advanced Manufacturing Technology, 2007, 33 (11-12): : 1122 - 1127
  • [49] Optimization of squeeze casting process parameters using Taguchi analysis
    Vijian, P.
    Arunachalam, V. P.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2007, 33 (11-12): : 1122 - 1127
  • [50] Optimization of squeeze casting process parameters using Taguchi analysis
    P. Vijian
    V. P. Arunachalam
    The International Journal of Advanced Manufacturing Technology, 2007, 33 : 1122 - 1127
12345