Optimization of brazing process parameters in butt joint of brass 319 using Taguchi method

被引：21
|
作者：
Stalin, B. [1 ]
Ravichandran, M. [2 ]
Vadivel, K. [1 ]
Vairamuthu, J. [3 ]
机构：
[1] Anna Univ, Dept Mech Engn, Reg Campus Madurai, Madurai 625019, Tamil Nadu, India
[2] K Ramakrishnan Coll Engn, Dept Mech Engn, Trichy 621112, India
[3] Sethu Inst Technol, Dept Mech Engn, Pulloor 626115, Kariapatti, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2020年 / 21卷
关键词：
Brazing; Brass; 319; L9 orthogonal array; Taguchi method; S/N ratio; ANOVA; WELDING PROCESS PARAMETERS; MECHANICAL-PROPERTIES; ATTAIN; STRENGTH; MICROSTRUCTURE; STEEL; BEAM;
D O I：
10.1016/j.matpr.2019.04.226
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Brazing is the metal joining processes of melting a filler metal into the joint, the filler metal having a lower melting point than the adjoining metal. The oxyacetylene brazing processes are executed with 18 brass plates, where each pair of same plates is joined together as butt joint. The copper flux powder is used, in order to control the oxidation during brazing processes. Brazed brass 319 joints are tested for the tensile and impact strength observation. The objective of this work is to optimize the process parameters involved in brazing processes using Taguchi optimization with L9 orthogonal array, signal to noise ratio and analysis of variance. The optimization processes are executed using MATLAB software. The obtained results will be helpful to the brazing industries to join the brass plates. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：237 / 243
页数：7
相关论文
共 50 条
  • [21] Optimization of green sand casting process parameters by using Taguchi's method
    Guharaja, S.
    Haq, A. Noorul
    Karuppannan, K. M.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2006, 30 (11-12): : 1040 - 1048
  • [22] Optimization of green sand casting process parameters by using Taguchi’s method
    S. Guharaja
    A. Noorul Haq
    K. M. Karuppannan
    The International Journal of Advanced Manufacturing Technology, 2006, 30 : 1040 - 1048
  • [23] Optimization of Process Parameters Affecting Glycoalkaloids in Potato Chips Using the Taguchi Method
    Koyuncu, Dilek
    Duran, Ayhan
    POTATO RESEARCH, 2024, 67 (04) : 1247 - 1263
  • [24] Optimization of Abrasive Water Jet Machining Parameters for α-β brass using Taguchi Methodology
    Marichamy, S.
    Ravichandran, M.
    Stalin, B.
    Babu, B. Sridhar
    FME TRANSACTIONS, 2019, 47 (01): : 116 - 121
  • [25] Optimization of TIG welding process parameters for X70-304l dissimilar joint using taguchi method
    Benlamnouar M.F.
    Hadji M.
    Badji R.
    Bensaid N.
    Saadi T.
    Laksir Y.L.D.
    Senouci S.
    Solid State Phenomena, (51-61): : 51 - 61
  • [26] Optimization of process parameters on engine exhaust valves using Taguchi method in friction welding process
    Nagasankar, P.
    Gurusamy, P.
    Gopinath, S.
    Gnanaprakash, K.
    Pradeep, G.
    MATERIALS TODAY-PROCEEDINGS, 2020, 33 : 3212 - 3217
  • [27] Optimum Welding Parameters for Friction Stir Welded AA6063 Pipe Butt Joint Using the Taguchi Method
    Ismail, Azman
    Zulkipli, Fatin Nur
    Awang, Mokhtar
    Ab Rahman, Fauziah
    Khalid, Puteri Zarina Megat
    Baharudin, Bakhtiar Ariff
    TRANSACTIONS ON MARITIME SCIENCE-TOMS, 2021, 10 (02): : 404 - 413
  • [28] Optimization of process parameters to improve mechanical properties of fused deposition method using taguchi method
    Giri J.
    Sunheriya N.
    Sathish T.
    Kadu Y.
    Chadge R.
    Giri P.
    Parthiban A.
    Mahatme C.
    Interactions, 2024, 245 (01)
  • [29] Optimization of Bending Process Parameters for Seamless Tubes Using Taguchi Method and Finite Element Method
    Lin, Jui-Chang
    Lee, Kingsun
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2015, 2015
  • [30] Optimization of RSW process parameters on tensile strength by taguchi method
    Raja, S.
    Vignesh, K.
    Ravikumar, M.
    Sanjeevi, R.
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2023, 24 (01): : 153 - 157
12345