Optimization of brazing process parameters in butt joint of brass 319 using Taguchi method

被引：21

作者：

Stalin, B. ^{[1
]}

Ravichandran, M. ^{[2
]}

Vadivel, K. ^{[1
]}

Vairamuthu, J. ^{[3
]}

机构：

[1] Anna Univ, Dept Mech Engn, Reg Campus Madurai, Madurai 625019, Tamil Nadu, India

[2] K Ramakrishnan Coll Engn, Dept Mech Engn, Trichy 621112, India

[3] Sethu Inst Technol, Dept Mech Engn, Pulloor 626115, Kariapatti, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2020年 / 21卷

关键词：

Brazing; Brass; 319; L9 orthogonal array; Taguchi method; S/N ratio; ANOVA; WELDING PROCESS PARAMETERS; MECHANICAL-PROPERTIES; ATTAIN; STRENGTH; MICROSTRUCTURE; STEEL; BEAM;

D O I：

10.1016/j.matpr.2019.04.226

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Brazing is the metal joining processes of melting a filler metal into the joint, the filler metal having a lower melting point than the adjoining metal. The oxyacetylene brazing processes are executed with 18 brass plates, where each pair of same plates is joined together as butt joint. The copper flux powder is used, in order to control the oxidation during brazing processes. Brazed brass 319 joints are tested for the tensile and impact strength observation. The objective of this work is to optimize the process parameters involved in brazing processes using Taguchi optimization with L9 orthogonal array, signal to noise ratio and analysis of variance. The optimization processes are executed using MATLAB software. The obtained results will be helpful to the brazing industries to join the brass plates. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页码：237 / 243

页数：7

共 50 条

[1] Optimization of Process Parameter of Brass Butt Joint Using Brazing Process
Venkateswaran, Sriram
Ajithkumar
Fazil, Shaik
Balakrishnan, Kanimozhi
3RD INTERNATIONAL CONFERENCE ON FRONTIERS IN AUTOMOBILE AND MECHANICAL ENGINEERING (FAME 2020), 2020, 2311
[2] Parameters optimization of laser brazing in crimping butt using Taguchi and BPNN-GA
Rong, Youmin
Zhang, Zhen
Zhang, Guojun
Yue, Chen
Gu, Yafei
Huang, Yu
Wang, Chunming
Shao, Xinyu
OPTICS AND LASERS IN ENGINEERING, 2015, 67 : 94 - 104
[3] Optimization of vacuum brazing process parameters in AA6061 using Taguchi method
Lin, Huei
Hwang, Jiun-Ren
Fung, Chin-Ping
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2016, 10 (02):
[4] Experimental optimization of cutting parameters in turning of brass alloy using Taguchi method
Krishnan, J. Yadu
Sundar, S. Poorna
Karthikeyan, L.
Ajay, C. Veera
Manisekar, K.
MATERIALS TODAY-PROCEEDINGS, 2021, 42 : 377 - 382
[5] Optimization of Friction Stir Processing Parameters for 60/40 Brass using Taguchi Method
Meena, Kamlesh
Kumar, Aditya
Pandya, Shailesh N.
MATERIALS TODAY-PROCEEDINGS, 2017, 4 (02) : 1978 - 1987
[6] Optimization of vacuum casting process parameters using Taguchi method
Ahmad, Mohd Nazri
Alkahari, Mohd Rizal
Basir, Mohamad Faris Mohd
Maidin, Nurul Ain
Wahid, Mohammad Khalid
Ab Rahman, Mohd Hidayat
Osman, Mohd Hairizal
PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2018 (MERD), 2018, : 146 - 147
[7] Optimization of process parameters for friction stir welding of cast aluminium alloy A319 by Taguchi method
Jayaraman, M.
Sivasubramanian, R.
Balasubramanian, V.
Lakshminarayanan, A. K.
JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH, 2009, 68 (01): : 36 - 43
[8] Parametric optimization of EDM process on α–β brass using Taguchi approach
S. Marichamy
M. Saravanan
M. Ravichandran
G. Veerappan
Russian Journal of Non-Ferrous Metals, 2016, 57 : 586 - 598
[9] Parametric optimization of EDM process on α-β brass using Taguchi approach
Marichamy, S.
Saravanan, M.
Ravichandran, M.
Veerappan, G.
RUSSIAN JOURNAL OF NON-FERROUS METALS, 2016, 57 (06) : 586 - 598
[10] Optimization of Process Parameters of Die Slide Injection by Using Taguchi Method
Jeong, Soo-Jin
Moon, Seong-Joon
Jeoung, Sun-Kyoung
Lee, Pyoung-Chan
Moon, Ju-ho
KOREAN CHEMICAL ENGINEERING RESEARCH, 2012, 50 (02): : 264 - 269

← 1 2 3 4 5 →