Metallographic analysis of in-house developed marine grade aluminum alloy AA5086friction stir welds

被引：0

作者：

Rinu, Gollo ^{[1
]}

Singh, Sandeep ^{[1
]}

Mondal, Arpan Kumar ^{[2
]}

Nirsanametla, Yadaiah ^{[1
]}

机构：

[1] North Eastern Reg Inst Sci & Technol, Dept Mech Engn, Nirjuli 791109, Arunachal Prade, India

[2] Natl Inst Tech Teachers Training & Res, Dept Mech Engn, Kolkata 700106, W Bengal, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2022年 / 62卷

关键词：

Friction stir welding; Aluminum alloy; Microstructure; Mechanical Properties; MECHANICAL-PROPERTIES; PROCESS PARAMETERS; MICROSTRUCTURE; AA5083-AA6082;

D O I：

10.1016/j.matpr.2022.04.726

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A friction stir welding (FSW) setup was developed and performed trial experiment on marine grade aluminum alloy 5086 in the present work. The input parameters were traverse speed (56 and 80 mm/min) and spindle speed (750 and 1000 rpm). From study it was observed that the spindle speed has an immense influenced on joint formation compared to feed speed. The rotational speed of 750 rpm produced defect joints due to inadequate welding heat generation and joints without defect were achieved at 1000 rpm spindle speed. The metallographic analysis and mechanical testing were conducted for the defect-free weld joints. Copyright (C) 2022 Elsevier Ltd. All rights reserved.

引用

页码：4202 / 4206

页数：5

共 50 条

[31] Mechanical and Microstructural Characteristics of Underwater Friction Stir Welded AA5083 Armor-Grade Aluminum Alloy Joints
Saravanakumar, R.
Rajasekaran, T.
Pandey, C.
Menaka, M.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (10) : 8459 - 8472
[32] Mechanical and Microstructural Characteristics of Underwater Friction Stir Welded AA5083 Armor-Grade Aluminum Alloy Joints
R. Saravanakumar
T. Rajasekaran
C. Pandey
M. Menaka
Journal of Materials Engineering and Performance, 2022, 31 : 8459 - 8472
[33] Multi-response optimization of friction stir corner welding of dissimilar thickness AA5086 and AA6061 aluminum alloys by Taguchi grey relational analysis
Krishnan, Manigandan
Subramaniam, Senthilkumar
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2019, 233 (11) : 3733 - 3742
[34] Impact of varying tool position on the intermetallic compound formation, metallographic/mechanical characteristics of dissimilar DH36 steel, and aluminum alloy friction stir welds
Pankaj, Pardeep
Tiwari, Avinish
Biswas, Pankaj
WELDING IN THE WORLD, 2022, 66 (02) : 239 - 271
[35] Impact of varying tool position on the intermetallic compound formation, metallographic/mechanical characteristics of dissimilar DH36 steel, and aluminum alloy friction stir welds
Pardeep Pankaj
Avinish Tiwari
Pankaj Biswas
Welding in the World, 2022, 66 : 239 - 271
[36] The effect of the number of passes in friction stir processing of aluminum alloy (AA6082) and its failure analysis
Senthilkumar, R.
Prakash, M.
Arun, N.
Jeyakumar, A. Arul
APPLIED SURFACE SCIENCE, 2019, 491 : 420 - 431
[37] Temperature Distribution During Friction Stir Welding of AA2014 Aluminum Alloy: Experimental and Statistical Analysis
Bhavesh Chaudhary
Vivek Patel
P. L. Ramkumar
Jay Vora
Transactions of the Indian Institute of Metals, 2019, 72 : 969 - 981
[38] Finite Element Analysis of Friction Stir Welded Aluminum Alloy AA6061-T6 Joints
Serindag, Huseyin Tarik
Kiral, Binnur Goren
Kadayifci, Zeki Alper
MATERIALS TESTING, 2014, 56 (11-12) : 937 - 944
[39] Temperature Distribution During Friction Stir Welding of AA2014 Aluminum Alloy: Experimental and Statistical Analysis
Chaudhary, Bhavesh
Patel, Vivek
Ramkumar, P. L.
Vora, Jay
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019, 72 (04) : 969 - 981
[40] Investigations on friction stir welding of AA5083-H32 marine grade aluminium alloy by the effect of varying the process parameters
Saravanakumar, R.
Krishna, K.
Rajasekaran, T.
Siranjeevi, S.
2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2018), 2018, 402

← 1 2 3 4 5 →