Metallographic analysis of in-house developed marine grade aluminum alloy AA5086friction stir welds

被引：0
|
作者：
Rinu, Gollo [1 ]
Singh, Sandeep [1 ]
Mondal, Arpan Kumar [2 ]
Nirsanametla, Yadaiah [1 ]
机构：
[1] North Eastern Reg Inst Sci & Technol, Dept Mech Engn, Nirjuli 791109, Arunachal Prade, India
[2] Natl Inst Tech Teachers Training & Res, Dept Mech Engn, Kolkata 700106, W Bengal, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2022年 / 62卷
关键词：
Friction stir welding; Aluminum alloy; Microstructure; Mechanical Properties; MECHANICAL-PROPERTIES; PROCESS PARAMETERS; MICROSTRUCTURE; AA5083-AA6082;
D O I：
10.1016/j.matpr.2022.04.726
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A friction stir welding (FSW) setup was developed and performed trial experiment on marine grade aluminum alloy 5086 in the present work. The input parameters were traverse speed (56 and 80 mm/min) and spindle speed (750 and 1000 rpm). From study it was observed that the spindle speed has an immense influenced on joint formation compared to feed speed. The rotational speed of 750 rpm produced defect joints due to inadequate welding heat generation and joints without defect were achieved at 1000 rpm spindle speed. The metallographic analysis and mechanical testing were conducted for the defect-free weld joints. Copyright (C) 2022 Elsevier Ltd. All rights reserved.
引用
收藏
页码：4202 / 4206
页数：5
相关论文
共 50 条
  • [21] Optimization and analysis of microstructural friction stir welded AA5083 grade aluminium alloy
    Muthurasu, P.
    Kathiresan, M.
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2021, 22 (06): : 697 - 704
  • [22] Experimental investigation of underwater friction-stir welding of 5083 marine-grade aluminum alloy
    Kishta, Emad Eldin
    Darras, Basil
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2016, 230 (03) : 458 - 465
  • [23] Fatigue analysis of the friction stir welded AA6061-T6 aluminum alloy
    Jain, Nitesh
    Kumar, Rajesh
    MATERIALS RESEARCH EXPRESS, 2021, 8 (01)
  • [24] Cyclic lateral behavior of friction stir spot welds of AA2219 aluminum alloy: impact of inherent flow defects
    Ojo, O. O.
    Taban, E.
    Kaluc, E.
    Sik, A.
    KOVOVE MATERIALY-METALLIC MATERIALS, 2019, 57 (05): : 329 - 342
  • [25] Optimization of process parameters of aluminum alloy AA 2014-T6 friction stir welds by response surface methodology
    Kadaganchi, Ramanjaneyulu
    Gankidi, Madhusudhan Reddy
    Gokhale, Hina
    DEFENCE TECHNOLOGY, 2015, 11 (03): : 209 - 219
  • [26] Optimization of process parameters of aluminum alloy AA 2014-T6 friction stir welds by response surface methodology
    Ramanjaneyulu KADAGANCHI
    Madhusudhan Reddy GANKIDI
    Hina GOKHALE
    Defence Technology, 2015, 11 (03) : 209 - 219
  • [27] Simulation and validation of ballistic performance of armor grade AA7075 aluminum alloy using friction stir processing
    SasankSekharMurty, A.
    LahariRamya, P.
    SaiGowtham, D.
    Sudhakar, I
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (09) : 20186 - 20192
  • [28] Residual stress measurement on AA6061-T6 aluminum alloy friction stir butt welds using contour method
    Liu, Chuan
    Yi, Xiang
    MATERIALS & DESIGN, 2013, 46 : 366 - 371
  • [29] Analysis of Friction Stir Processed Surface Quality of AA2098 Aluminum Alloy for Aeronautical Applications
    Carta, Mauro
    Buonadonna, Pasquale
    Marongiu, Gianluca
    El Mehtedi, Mohamad
    METALLURGICAL & MATERIALS ENGINEERING, 2023, 29 (02) : 16 - 22
  • [30] Effect of welding parameters on microstructure and mechanical properties of aluminum alloy AA6082-T6 friction stir spot welds
    Aydin, H.
    Tuncel, O.
    Umur, Y.
    Tutar, M.
    Bayram, A.
    INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2017, 24 (03) : 215 - 227
12345