INFLUENCE OF PROCESS PARAMETERS IN FRICTION DRILLING OF TITANIUM TI-6AL-4V ALLOY

被引：1

作者：

Pangjundee, Thongchai ^{[1
]}

Muttamara, Apiwat ^{[1
]}

机构：

[1] Thammasat Univ, Fac Engn, Dept Ind Engn, 99 Moo 18 Paholyothin Rd, Klongluang 12121, Pathumthani, Thailand

来源：

MM SCIENCE JOURNAL | 2021年 / 2021卷

关键词：

Friction drilling; Titanium Ti-6Al-4V; Thrust force; Torque force; Hardness; ALUMINUM;

D O I：

10.17973/MMSJ.2021_10_2021086

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Friction drilling is a process of using the friction between the rotating conical tool and the workpiece to generate heat and deform the work piece's material and penetrate the hole. The softened material is pushed sideward and downward to make the bushing. This paper aimed to study the influence of friction drilling parameters. Thrust forces and torque forces were analysed. Experiments were carried out with a friction drill tool made of tungsten carbide on titanium grade Ti-6Al-4V. The parameters used in this study were spindle speed and feed rate. It was found that the thrust force and torque decreased with increased spindle speed and with decrease of feed parameters. The microstructure reveals that deformed grains at hole's surface relate to hardness on the cross-section of workpiece. The highest value of microhardness was 813.2 HV and reduced to the original hardness of the matrix material.

引用

页码：4791 / 4796

页数：6

共 50 条

[41] Influence of Warm Bending on the Surface Topography of Titanium Alloy Ti-6Al-4V
Dubjella, Patrick
Merklein, Marion
17TH INTERNATIONAL CONFERENCE ON SHEET METAL (SHEMET17), 2017, 183 : 23 - 30
[42] Influence of electropulsing assisted on machining properties of Ti-6Al-4V titanium alloy
Qu, Shengguan
Zhai, Jianshuo
Sun, Pengfei
Duan, Chenfeng
Li, Xiaoqiang
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 126 (7-8): : 3161 - 3174
[43] Drilling of titanium alloy (Ti6Al4V) - a review
Yuan, Chua Guang
Pramanik, A.
Basak, A. K.
Prakash, C.
Shankar, S.
MACHINING SCIENCE AND TECHNOLOGY, 2021, 25 (04) : 637 - 702
[44] Influence of the curve of flow in the computational simulation of the hot forging process of the titanium alloy TI-6AL-4V
Hentz, Eduardo André
Pedro K. Knoll, Lírio Schaeffer E
Ciencia y Engenharia/ Science and Engineering Journal, 2007, 16 : 53 - 59
[45] Influence of rotational speed on process characteristics in friction surfacing of Ti-6Al-4V
Fitseva, V.
Hanke, S.
dos Santos, J. F.
MATERIALS AND MANUFACTURING PROCESSES, 2017, 32 (05) : 557 - 563
[46] Monopulse electrical discharge machining ablation drilling technology for Ti-6Al-4V titanium alloy
Cao, Zhongli
Liu, Zhidong
Wang, Xiangzhi
Qiu, Mingbo
Hui, Zhiguang
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 86 (1-4): : 539 - 546
[47] Monopulse electrical discharge machining ablation drilling technology for Ti-6Al-4V titanium alloy
Zhongli Cao
Zhidong Liu
Xiangzhi Wang
Mingbo Qiu
Zhiguang Hui
The International Journal of Advanced Manufacturing Technology, 2016, 86 : 539 - 546
[48] RETRACTION: Cutting tool wear minimization in drilling operations of titanium alloy Ti-6Al-4V
Soori, Mohsen
Arezoo, Behrooz
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2025, 239 (03) : NP1 - NP1
[49] Drilling force model for forced low frequency vibration assisted drilling of Ti-6Al-4V titanium alloy
Yang, Haojun
Ding, Wenfeng
Chen, Yan
Laporte, Sylvain
Xu, Jiuhua
Fu, Yucan
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2019, 146
[50] Optimization of Process Parameters in Micro-EDM of Ti-6Al-4V Alloy
Krishnaraj, V.
JOURNAL FOR MANUFACTURING SCIENCE AND PRODUCTION, 2016, 16 (01) : 41 - 49

← 1 2 3 4 5 →