INFLUENCE OF PROCESS PARAMETERS IN FRICTION DRILLING OF TITANIUM TI-6AL-4V ALLOY

被引：1

作者：

Pangjundee, Thongchai ^{[1
]}

Muttamara, Apiwat ^{[1
]}

机构：

[1] Thammasat Univ, Fac Engn, Dept Ind Engn, 99 Moo 18 Paholyothin Rd, Klongluang 12121, Pathumthani, Thailand

来源：

MM SCIENCE JOURNAL | 2021年 / 2021卷

关键词：

Friction drilling; Titanium Ti-6Al-4V; Thrust force; Torque force; Hardness; ALUMINUM;

D O I：

10.17973/MMSJ.2021_10_2021086

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Friction drilling is a process of using the friction between the rotating conical tool and the workpiece to generate heat and deform the work piece's material and penetrate the hole. The softened material is pushed sideward and downward to make the bushing. This paper aimed to study the influence of friction drilling parameters. Thrust forces and torque forces were analysed. Experiments were carried out with a friction drill tool made of tungsten carbide on titanium grade Ti-6Al-4V. The parameters used in this study were spindle speed and feed rate. It was found that the thrust force and torque decreased with increased spindle speed and with decrease of feed parameters. The microstructure reveals that deformed grains at hole's surface relate to hardness on the cross-section of workpiece. The highest value of microhardness was 813.2 HV and reduced to the original hardness of the matrix material.

引用

页码：4791 / 4796

页数：6

共 50 条

[31] Influence of hydrogen contents of Ti-6Al-4V alloy on friction and wear mechanism between titanium alloy and cemented carbide
1600, Trans Tech Publications Ltd (584):
[32] Friction-stir welding and processing of Ti-6Al-4V titanium alloy: A review
Mironov, S.
Sato, Y. S.
Kokawa, H.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2018, 34 (01) : 58 - 72
[33] Friction-stir welding and processing of Ti-6Al-4V titanium alloy:A review
S.Mironov
Y.S.Sato
H.Kokawa
Journal of Materials Science & Technology, 2018, 34 (01) : 58 - 72
[34] Fatigue Properties of Ti-6Al-4V Titanium Alloy Friction Stir Welding Joint
Liu, Zhenlei
Wang, Yue
Ji, Shude
Yan, Dejun
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (08) : 4308 - 4316
[35] Fatigue Properties of Ti-6Al-4V Titanium Alloy Friction Stir Welding Joint
Zhenlei Liu
Yue Wang
Shude Ji
Dejun Yan
Journal of Materials Engineering and Performance, 2018, 27 : 4308 - 4316
[36] OPTIMIZATION OF REAMING PROCESS PARAMETERS FOR TITANIUM TI-6AL-4V ALLOY USING GREY RELATIONAL ANALYSIS
Ahmed, Shakeel L.
Kumar, Pradeep M.
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2016, VOL. 2, 2016,
[37] Influence of processing parameters on microstructure and roughness of electron beam melted Ti-6Al-4V titanium alloy
Prisco, U.
Astarita, A.
El Hassanin, A.
Franchitti, S.
MATERIALS AND MANUFACTURING PROCESSES, 2019, 34 (15) : 1753 - 1760
[38] INVESTIGATING THE EFFECTS OF CUTTING PARAMETERS ON THE HOLE QUALITY IN DRILLING THE Ti-6Al-4V ALLOY
Celik, Yahya Hisman
MATERIALI IN TEHNOLOGIJE, 2014, 48 (05): : 653 - 659
[39] Machinability of Ti-6Al-4V alloy in drilling with small drills
Fujise, K
Ohtani, T
PROGRESS OF CUTTING AND GRINDING: WITH SOME TOPICS IN ADVANCED MANUFACTURE TECHNOLOGY, 1998, : 49 - 54
[40] Influence of electropulsing assisted on machining properties of Ti-6Al-4V titanium alloy
Shengguan Qu
Jianshuo Zhai
Pengfei Sun
Chenfeng Duan
Xiaoqiang Li
The International Journal of Advanced Manufacturing Technology, 2023, 126 : 3161 - 3174

← 1 2 3 4 5 →