INFLUENCE OF PROCESS PARAMETERS IN FRICTION DRILLING OF TITANIUM TI-6AL-4V ALLOY

被引：1

作者：

Pangjundee, Thongchai ^{[1
]}

Muttamara, Apiwat ^{[1
]}

机构：

[1] Thammasat Univ, Fac Engn, Dept Ind Engn, 99 Moo 18 Paholyothin Rd, Klongluang 12121, Pathumthani, Thailand

来源：

MM SCIENCE JOURNAL | 2021年 / 2021卷

关键词：

Friction drilling; Titanium Ti-6Al-4V; Thrust force; Torque force; Hardness; ALUMINUM;

D O I：

10.17973/MMSJ.2021_10_2021086

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Friction drilling is a process of using the friction between the rotating conical tool and the workpiece to generate heat and deform the work piece's material and penetrate the hole. The softened material is pushed sideward and downward to make the bushing. This paper aimed to study the influence of friction drilling parameters. Thrust forces and torque forces were analysed. Experiments were carried out with a friction drill tool made of tungsten carbide on titanium grade Ti-6Al-4V. The parameters used in this study were spindle speed and feed rate. It was found that the thrust force and torque decreased with increased spindle speed and with decrease of feed parameters. The microstructure reveals that deformed grains at hole's surface relate to hardness on the cross-section of workpiece. The highest value of microhardness was 813.2 HV and reduced to the original hardness of the matrix material.

引用

页码：4791 / 4796

页数：6

共 50 条

[1] Thermal modeling of drilling process in titanium alloy (Ti-6Al-4V)
Kumar, Ankit
Bhardwaj, Rajneesh
Joshi, Suhas S.
MACHINING SCIENCE AND TECHNOLOGY, 2020, 24 (03) : 341 - 365
[2] Drilling burr formation in titanium alloy, Ti-6Al-4V
Lab. for Manufacturing Automation, Dept. of Mechanical Engineering, University of California, Berkeley, United States
不详
CIRP Ann Manuf Technol, 1 (73-76):
[3] Drilling burr formation in titanium alloy, Ti-6Al-4V
Dornfeld, DA
Kim, JS
Dechow, H
Hewson, J
Chen, LJ
CIRP ANNALS 1999 - MANUFACTURING TECHNOLOGY, 1999, : 73 - 76
[4] Micro Drilling of Titanium Ti-6Al-4V: Influence of the Cutting Parameters on Tool Life
Fauzi, N. H. M.
Shuaib, N. A.
Zailani, Z. A.
Irfan, A. R.
Sobri, S. A.
5TH INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2019 (ICONGDM 2019), 2019, 2129
[5] Influence of laser beam process parameters on the bending ability of Ti-6Al-4V titanium alloy sheets
Naqvi, Syed Mesum Raza
Haidry, Azhar Ali
Xie, Deqiao
Ahmad, Shahzad
Liu, Yang
Chen, Ya
Jiao, Chen
Jamil, Muhammad
Yan, Chongjing
Shen, Lida
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 133 (7-8): : 3445 - 3460
[6] Investigation of Process Parameters for Friction Stir Processing (FSP) of Ti-6Al-4V Alloy
Chougule, Sandip
Sheed, Digvijay
Singh, R. K. P.
Prabhu, N.
Kashyap, B. P.
Jha, Kaushal
FRICTION STIR WELDING AND PROCESSING IX, 2017, : 53 - 64
[7] Dry drilling of alloy Ti-6Al-4V
Cantero, JL
Tardío, MM
Canteli, JA
Marcos, M
Miguélez, MH
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2005, 45 (11): : 1246 - 1255
[8] Influence of input parameters on the electrical discharge machining of titanium alloy (TI-6AL-4V)
Santos, Irapuan
Polli, Milton Luiz
Hioki, Daniel
International Journal of Manufacturing Research, 2015, 10 (03) : 286 - 298
[9] Influence of process parameters on dimensional accuracy of machined Titanium (Ti-6Al-4V) alloy in Laser Beam Machining Process
Muthuramalingam, T.
Moiduddin, Khaja
Akash, Ravi
Krishnan, Shravan
Mian, Syed Hammad
Ameen, Wadea
Alkhalefah, Hisham
OPTICS AND LASER TECHNOLOGY, 2020, 132
[10] Friction characteristics in green drilling titanium alloy Ti6Al4V
Jian Wu
Rong-di Han
Journal of Shanghai Jiaotong University (Science), 2012, 17 (6) : 684 - 689

← 1 2 3 4 5 →