Warpage Minimization on Nylon Side Arm Using Response Surface Methodology (RSM): An Analysis

被引：0
|
作者：
Sow, C. K. [1 ]
Fathullah, M. [1 ,2 ]
Shayfull, Z. [1 ,2 ]
Nasir, S. M. [2 ,3 ]
Shazzuan, S. [1 ]
机构：
[1] Univ Malaysia Perlis, Sch Mfg Engn, Kampus Tetap Pauh Putra, Arau 02600, Perlis, Malaysia
[2] Univ Malaysia Perlis, Green Design & Mfg Res Grp, Ctr Excellence Geopolymer & Green Technol CEGeoGT, Kangar 0100, Perlis, Malaysia
[3] Univ Malaysia Perlis, Ctr Diploma Studies, Kangar 0100, Perlis, Malaysia
来源：
3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017) | 2017年 / 1885卷
关键词：
D O I：
10.1063/1.5002337
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
This research is all about injection moulding process in determination of the optimum processing parameters used for manufacturing side arms of catheters in minimizing the warpage issues. The optimization method used was the RSM. Moreover, in this research tries to find the most significant factor affecting the warpage. From the literature review, 5 most significant parameters on warpage defect was selected. Those parameters were melt temperature, packing time, packing pressure, mould temperature melt temperature. At the beginning, side arm was drawn using software of CATIA V5. Then, software Mouldflow and Design Expert were employed to analyses on the popular warpage issues. Recommended parameter settings from the simulation work were then comparing with the optimization work of RSM. The result show that the warpage on the side arm was improved by 5.46 %
引用
收藏
页数：8
相关论文
共 50 条
  • [31] Minimization of warpage for wafer level package using response surface method
    Lee, Hye-Jin
    Park, Sun-Myoung
    Park, Sung-Jun
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2016, 17 (09) : 1201 - 1207
  • [32] Shrinkage Analysis on Thick Plate Part using Response Surface Methodology (RSM)
    Isafiq, M.
    Shayfull, Z.
    Nasir, S. M.
    Rashidi, M. M.
    Fathullah, M.
    Noriman, N. Z.
    2ND INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2016 (ICONGDM 2016), 2016, 78
  • [33] Warpage Optimisation on the Moulded Part with Conformal Cooling Channels using Response Surface Methodology (RSM) and Glowworm Swarm Optimisation (GSO)
    Hazwan, M. H. M.
    Shayfull, Z.
    Sharif, S.
    Nasir, S. M.
    Rashidi, M. M.
    ENGINEERING TECHNOLOGY INTERNATIONAL CONFERENCE 2016 (ETIC 2016), 2017, 97
  • [34] Optimization of Warpage on Front Panel Housing Plastic Part Using Response Surface Methodology (RSM) and Genetic Algorithm Method (GA)
    Miza, A. T. N. A.
    Shayfull, Z.
    Noriman, N. Z.
    Sazli, S. M.
    Hidayah, M. H. N.
    Norshahira, R.
    GREEN DESIGN AND MANUFACTURE: ADVANCED AND EMERGING APPLICATIONS, 2018, 2030
  • [35] Optimisation of Warpage on Plastic Injection Moulding Part with MGSS Conformal Cooling Channels Moulds Using Response Surface Methodology (RSM)
    Hazwan, M. H. M.
    Shayfull, Z.
    Sharif, S.
    Zainal, N.
    Nasir, S. M.
    ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY V, 2017, 1835
  • [36] Warpage Analysis on Thick Shell Part Using Response Surface Methodology (RSM) and Bat Algorithm (BA) to Optimize Parameter Setting in Injection Molding Process
    Ch'ng, S. Q.
    Nasir, S. M.
    Fathullah, M.
    Noriman, N. Z.
    Sazli, S. M.
    GREEN DESIGN AND MANUFACTURE: ADVANCED AND EMERGING APPLICATIONS, 2018, 2030
  • [37] Warpage Analysis of Thick Shell Part (Thickness Above 2mm) By Using Response Surface Methodology (RSM) and Glowworm Swarm Optimization (GSO)
    Sim, Y. S.
    Nasir, S. M.
    Fathullah, M.
    Shuaib, N. A.
    Hazwan, M. H. M.
    5TH INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2019 (ICONGDM 2019), 2019, 2129
  • [38] Optimization of Bentocrete parameters using Response Surface Methodology (RSM)
    Reddy, M. Achyutha Kumar
    Rao, V. Ranga
    Chaitanya, K. Naga
    Khed, Veerendrakumar C.
    AIMS MATERIALS SCIENCE, 2021, 8 (02) : 221 - 246
  • [39] ANALYSIS OF ARTOCARPUS HETEROPHYLLUS PEEL AS A NATURAL COAGULANT USING RESPONSE SURFACE METHODOLOGY (RSM)
    Priyatharishini, M.
    Mokhtar, N. M.
    JURNAL TEKNOLOGI-SCIENCES & ENGINEERING, 2020, 82 (04): : 98 - 107
  • [40] Optimization of Warpage on Battery Cover for hair Clipper Plastic Part Using Response Surface Methodology (RSM) and Firefly Algorithm Method (FA)
    Nabila, W. P. N.
    Nasir, S. M.
    Sazli, S. M.
    Fathullah, M.
    Irfan, A. R.
    5TH INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2019 (ICONGDM 2019), 2019, 2129
12345