Warpage Minimization on Nylon Side Arm Using Response Surface Methodology (RSM): An Analysis

被引：0
|
作者：
Sow, C. K. [1 ]
Fathullah, M. [1 ,2 ]
Shayfull, Z. [1 ,2 ]
Nasir, S. M. [2 ,3 ]
Shazzuan, S. [1 ]
机构：
[1] Univ Malaysia Perlis, Sch Mfg Engn, Kampus Tetap Pauh Putra, Arau 02600, Perlis, Malaysia
[2] Univ Malaysia Perlis, Green Design & Mfg Res Grp, Ctr Excellence Geopolymer & Green Technol CEGeoGT, Kangar 0100, Perlis, Malaysia
[3] Univ Malaysia Perlis, Ctr Diploma Studies, Kangar 0100, Perlis, Malaysia
来源：
3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017) | 2017年 / 1885卷
关键词：
D O I：
10.1063/1.5002337
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
This research is all about injection moulding process in determination of the optimum processing parameters used for manufacturing side arms of catheters in minimizing the warpage issues. The optimization method used was the RSM. Moreover, in this research tries to find the most significant factor affecting the warpage. From the literature review, 5 most significant parameters on warpage defect was selected. Those parameters were melt temperature, packing time, packing pressure, mould temperature melt temperature. At the beginning, side arm was drawn using software of CATIA V5. Then, software Mouldflow and Design Expert were employed to analyses on the popular warpage issues. Recommended parameter settings from the simulation work were then comparing with the optimization work of RSM. The result show that the warpage on the side arm was improved by 5.46 %
引用
收藏
页数：8
相关论文
共 50 条
  • [21] Applying Response Surface Methodology (RSM) in Optimizing Warpage of a Thin Injection Moulded Part
    Yasiin, A.
    Fathullah, M.
    Shayfull, Z.
    Nasir, S. M.
    Hazwan, M. H. M.
    Shazzuan, S.
    3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
  • [22] Warpage Optimisation on the Moulded Part using Response Surface Methodology (RSM) and Genetic Algorithm (GA) Optimisation Approaches
    Hazwan, M. H. M.
    Shayfull, Z.
    Sharif, S.
    Nasir, S. M.
    Rashidi, M. M.
    3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
  • [23] Warpage Optimization on Thin Shell Part (Below 2mm) Using Response Surface Methodology (RSM)
    Syazwani, N.
    Nasir, S. M.
    Fathullah, M.
    Hazwan, M. H. M.
    Noriman, N. Z.
    GREEN DESIGN AND MANUFACTURE: ADVANCED AND EMERGING APPLICATIONS, 2018, 2030
  • [24] Warpage Optimization on Thick Shell Part (Thickness below 2mm) by using Response Surface Methodology (RSM)
    Ilyas, M.
    Nasir, S. M.
    Fathullah, M.
    Noriman, N. Z.
    Hazwan, M. H. M.
    GREEN DESIGN AND MANUFACTURE: ADVANCED AND EMERGING APPLICATIONS, 2018, 2030
  • [25] Optimisation of Warpage on Thin Shell Plastic Part Using Response Surface Methodology (RSM) and Glowworm Swarm Optimisation (GSO)
    Asyirah, B. N.
    Shayfull, Z.
    Nasir, S. M.
    Fathullah, M.
    Hazwan, M. H. M.
    3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
  • [26] Optimization of Warpage on Plastic Injection Molding Part Using Response Surface Methodology (RSM) and Particle Swarm Optimization (PSO)
    Miza, A. T. N. A.
    Shayfull, Z.
    Noriman, N. Z.
    Sazli, S. M.
    Hidayah, M. H. N.
    Norshahira, R.
    GREEN DESIGN AND MANUFACTURE: ADVANCED AND EMERGING APPLICATIONS, 2018, 2030
  • [27] Warpage Optimisation on the Moulded Part with Straight Drilled and MGSS Conformal Cooling Channels Using Response Surface Methodology (RSM)
    Hazwan, M. H. M.
    Shayfull, Z.
    Sharif, S.
    Nasir, S. M.
    Rashidi, M. M.
    3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
  • [28] Optimisation of Warpage on Plastic Injection Moulding Part Using Response Surface Methodology (RSM) and Genetic Algorithm Method (GA)
    Miza, A. T. N. A.
    Shayfull, Z.
    Nasir, S. M.
    Fathullah, M.
    Hazwan, M. H. M.
    3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
  • [29] Warpage Analysis of Thick Shell Part (Thickness Above 2mm) by using Response Surface Methodology (RSM) and Genetic Algorithm (GA)
    Sim, Y. S.
    Nasir, S. M.
    Fathullah, M.
    Irfan, A. R.
    Hazwan, M. H. M.
    5TH INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2019 (ICONGDM 2019), 2019, 2129
  • [30] Minimization of warpage for wafer level package using response surface method
    Hye-Jin Lee
    Sun-Myoung Park
    Sung-Jun Park
    International Journal of Precision Engineering and Manufacturing, 2016, 17 : 1201 - 1207
12345