Low-cycle fatigue property of forged mod.9Cr-1Mo steel at elevated temperature

被引：0
|
作者：
Nishino, S [1 ]
Shiozawa, K [1 ]
Takahashi, K [1 ]
Seo, S [1 ]
Yamamoto, Y [1 ]
机构：
[1] Toyama Univ, Fac Engn, Toyama 930, Japan
来源：
FATIGUE '99: PROCEEDINGS OF THE SEVENTH INTERNATIONAL FATIGUE CONGRESS, VOLS 1-4 | 1999年
关键词：
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In this study, the low-cycle fatigue property of forged modified 9Cr-1Mo steel was investigated at elevated temperature. Total strain controlled low-cycle fatigue tests were carried out using a smooth specimen with triangular and tension-hold or compression-hold trapezoidal waveforms at 873K in air. From the experimental results, the low-cycle fatigue life decreased by introducing a hold period as compared with that using a triangular waveform. The fatigue life of the compression-hold tests decreased as compared with that of the tension-hold tests. The low-cycle fatigue life of forged mod.9Cr-1Mo steel with each strain waveform can be evaluated by the parameter of the tensile strain-energy and cycling time.
引用
收藏
页码：2177 / 2182
页数：6
相关论文
共 50 条
  • [31] Remaining life evaluation based on a new creep-fatigue damage rule for Mod.9Cr-1Mo steel
    Tokimasa, Katsuyuki
    Miyahara, Mitsuo
    Zairyo/Journal of the Society of Materials Science, Japan, 1999, 48 (02): : 144 - 151
  • [32] Fracture Toughness Characterization of Mod.9Cr-1Mo Welds
    Dutt, B. Shashank
    Shanthi, G.
    Moitra, A.
    STRUCTURAL INTEGRITY ASSESSMENT, ICONS 2018, 2020, : 535 - 543
  • [33] Comparison and Assessment of the Creep-Fatigue Evaluation Methods With Notched Specimen Made of Mod.9Cr-1Mo Steel
    Ando, Masanori
    Hirose, Yuichi
    Karato, Takanori
    Watanabe, Sota
    Inoue, Osamu
    Kawasaki, Nobuchika
    Enuma, Yasuhiro
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2014, 136 (04):
  • [34] Creep-fatigue tests of double-end notched bar made of MOD.9CR-1MO steel
    Japan Atomic Energy Agency, O-arai, Ibaraki, Japan
    不详
    不详
    不详
    Int Conf Nucl Eng Proc ICONE,
  • [35] Thermal fatigue crack growth tests and analyses of thick wall cylinder made of Mod.9Cr-1Mo steel
    Wakai, Takashi
    Inoue, Osamu
    Ando, Masanori
    Kobayashi, Sumio
    NUCLEAR ENGINEERING AND DESIGN, 2015, 295 : 797 - 803
  • [36] Low cycle fatigue behavior of modified 9Cr-1Mo steel at room temperature
    Verma, Preeti
    Srinivas, N. C. Santhi
    Singh, S. R.
    Singh, Vakil
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 652 : 30 - 41
  • [37] Numerical simulation of low-cycle fatigue test of welded 9Cr-1Mo steel at 550 °C
    Janulionis, Remigijus
    Dundulis, Gintautas
    ENGINEERING STRUCTURES, 2025, 326
  • [38] A study on fatigue and creep-fatigue life assessment using cyclic thermal tests with Mod.9Cr-1Mo steel structures
    Ando, Masanori
    Kanasaki, Hiroshi
    Date, Shingo
    Kikuchi, Koichi
    Satoh, Kenichiro
    Takasho, Hideki
    Tsukimori, Kazuyuki
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, PVP 2012, VOL 6, PTS A AND B, 2012, : 327 - 336
  • [39] EFFECTS OF HYDROGEN ON BEHAVIOR OF LOW-CYCLE FATIGUE OF 2.25CR-1MO STEEL
    HAN, GW
    FENG, D
    SONG, YJ
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 1995, 11 (05) : 358 - 362
  • [40] Low-cyclic fatigue behavior of modified 9Cr-1Mo steel at elevated temperature
    Guguloth, Krishna
    Sivaprasad, S.
    Chakrabarti, D.
    Tarafder, S.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 604 : 196 - 206
12345