Low-cycle fatigue property of forged mod.9Cr-1Mo steel at elevated temperature

被引：0
|
作者：
Nishino, S [1 ]
Shiozawa, K [1 ]
Takahashi, K [1 ]
Seo, S [1 ]
Yamamoto, Y [1 ]
机构：
[1] Toyama Univ, Fac Engn, Toyama 930, Japan
来源：
FATIGUE '99: PROCEEDINGS OF THE SEVENTH INTERNATIONAL FATIGUE CONGRESS, VOLS 1-4 | 1999年
关键词：
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In this study, the low-cycle fatigue property of forged modified 9Cr-1Mo steel was investigated at elevated temperature. Total strain controlled low-cycle fatigue tests were carried out using a smooth specimen with triangular and tension-hold or compression-hold trapezoidal waveforms at 873K in air. From the experimental results, the low-cycle fatigue life decreased by introducing a hold period as compared with that using a triangular waveform. The fatigue life of the compression-hold tests decreased as compared with that of the tension-hold tests. The low-cycle fatigue life of forged mod.9Cr-1Mo steel with each strain waveform can be evaluated by the parameter of the tensile strain-energy and cycling time.
引用
收藏
页码：2177 / 2182
页数：6
相关论文
共 50 条
  • [21] COMPARISON OF CREEP-FATIGUE EVALUATION METHODS WITH NOTCHED SPECIMENS MADE OF MOD.9CR-1MO STEEL
    Ando, Masanori
    Hirose, Yuichi
    Karato, Takanori
    Watanabe, Sota
    Inoue, Osamu
    Kawasaki, Nobuchika
    Enuma, Yasuhiro
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, PVP 2011, VOL 6, A AND B, 2012, : 177 - 187
  • [22] Creep-fatigue life evaluation of mod.9Cr-1Mo steel round notch bar specimens
    Ueyama T.
    Ogata T.
    Zairyo/Journal of the Society of Materials Science, Japan, 2021, 70 (08): : 634 - 640
  • [23] Comparison of creep-fatigue evaluation methods with notched specimens made of mod.9CR-1MO steel
    Ando, Masanori
    Hirose, Yuichi
    Karato, Takanori
    Watanabe, Sota
    Inoue, Osamu
    Kawasaki, Nobuchika
    Enuma, Yasuhiro
    American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 2011, 6 (PARTS A AND B): : 177 - 187
  • [24] Effect of pre-strain and ratcheting strain on fatigue and creep-fatigue lives in Mod.9Cr-1Mo steel
    Ando, Masanori
    Isobe, Nobuhiro
    Date, Shingo
    Kikuchi, Koichi
    Enuma, Yasuhiro
    Zairyo/Journal of the Society of Materials Science, Japan, 2012, 61 (04) : 377 - 384
  • [25] EFFECT OF PROCESSING ON THE HIGH-TEMPERATURE LOW-CYCLE FATIGUE PROPERTIES OF MODIFIED 9CR-1MO FERRITIC STEEL
    EBI, G
    MCEVILY, AJ
    FATIGUE OF ENGINEERING MATERIALS AND STRUCTURES, 1984, 7 (04): : 299 - 314
  • [26] Biaxial low-cycle fatigue behavior of long-term-used Cr-Mo-V steel at elevated temperature
    Shiozawa, Kazuaki
    Nishino, Seiichi
    Fujii, Takeru
    Saito, Kennichi
    Naka, Hisafumi
    Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 1995, 61 (581): : 33 - 38
  • [27] Difference in the Effect of Cold Working and Tempering on Microstructure of Mod.9Cr-1Mo Steel
    Shioda, Yoshiki
    Kubushiro, Keiji
    Murata, Yoshinori
    MATERIALS TRANSACTIONS, 2019, 60 (06) : 921 - 928
  • [28] Creep Behavior, Deformation Mechanisms, and Creep Life of Mod.9Cr-1Mo Steel
    Fujio ABE
    Metallurgical and Materials Transactions A, 2015, 46 : 5610 - 5625
  • [29] Change in Vickers hardness and substructure during creep of a Mod.9Cr-1Mo steel
    Endo, T
    Masuyama, F
    Park, KS
    MATERIALS TRANSACTIONS, 2003, 44 (02) : 239 - 246
  • [30] Change in Hydrogen Desorption Characteristics of Mod.9Cr-1Mo Steel due to Creep
    Komazaki, Shin-ichi
    Honda, Tetsuya
    Sakamura, Takashi
    Sawada, Kota
    Kimura, Kazuhiro
    Kohno, Yutaka
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2010, 96 (10): : 614 - 619
12345