Investigation of the Effect of Zirconium Amount on Grain Size and Wear Performance in TZM Alloys Produced by Mechanical Alloying Method

被引：1

作者：

Sirali, Haktan ^{[1
]}

Simsek, Dogan ^{[2
]}

Ozyurek, Dursun ^{[3
]}

机构：

[1] Karabuk Univ, Inst Sci, Karabuk, Turkey

[2] Natl Def Univ, Army NCO Vocat HE Sch, Balikesir, Turkey

[3] Karabuk Univ, Technol Fac, Karabuk, Turkey

来源：

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2022年 / 75卷 / 03期

关键词：

TZM alloy; Zirconium; Grain size; Wear; BEHAVIOR;

D O I：

10.1007/s12666-021-02510-4

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

In this study, the relation between grain size, hardness and wear performance of Titanium-Zirconium-Molybdenum (TZM) alloys with different amounts (0.06, 0.07, 0.08 and 0.09 wt%) of Zr added by the mechanical alloying method was investigated. As a result of the studies, it was observed that the number of pores in the structure increased with the increase in the amount of Zr, while there was a decrease in the grain size. In the hardness and density results, it was observed that while the hardness values increased with increasing Zr amount, there was a decrease in the density values. As a result of the wear tests, the lowest weight loss at 10-30 N loads was obtained in the TZM alloy with the highest Zr added (0.09% Zr). The lowest friction coefficient in the friction coefficient results was obtained in TZM alloy with 0.09% Zr added.

引用

页码：805 / 812

页数：8

共 50 条

[31] Effect of the size of powder on the Microstructures and Grain Refining Performance of AlTiC alloys
Jing, Cao
Wang, Yongfeng
Wei, Chunxue
ADVANCES IN SUPERALLOYS, PTS 1 AND 2, 2011, 146-147 : 887 - +
[32] Microstructure, Mechanical Properties, and Antibacterial Performance of Novel Fe-Mn-Zn Nanocrystalline Alloys Produced by Mechanical Alloying
Dag, Ilker Emin
Kilic, Funda
Panigrahi, Mrutyunjay
Avar, Baris
ADVANCED ENGINEERING MATERIALS, 2025,
[33] Influence of CaO on the Nanohardness Behaviour of AZ63 Magnesium Alloys Produced by Mechanical Alloying Method
Boztas, M.
Ozarslan, S.
Sahin, O.
ACTA PHYSICA POLONICA A, 2016, 130 (01) : 357 - 361
[34] Alloying effect on grain-size dependent deformation twinning in nanocrystalline Cu-Zn alloys
Ma, X. L.
Xu, W. Z.
Zhou, H.
Moering, J. A.
Narayan, J.
Zhu, Y. T.
PHILOSOPHICAL MAGAZINE, 2015, 95 (03) : 301 - 310
[35] Investigation of Wear Performance of Different Amount SiC Reinforcements A356 Matrix Composite Materials Produced by Semi-Solid Process Method
Simsek, Ijlal
Simsek, Dogan
Ozyurek, Dursun
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2020, 23 (04): : 1237 - 1243
[36] Effect of grain size composition on mechanical performance requirement for particles in aggregate blend based on photoelastic method
Wang, Sudi
Miao, Yinghao
Wang, Linbing
CONSTRUCTION AND BUILDING MATERIALS, 2023, 363
[37] Investigation of the wear and corrosion behaviors of Ti5Al2.5Fe and Ti6Al4V alloys produced by mechanical alloying method in simulated body fluid environment
Simsek, Ijlal
Ozyurek, Dursun
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2019, 94 : 357 - 363
[38] Grain size effect on mechanical performance of nanostructured superelastic NiTi alloy
Xiao, Yao
Zeng, Pan
Lei, Liping
MATERIALS RESEARCH EXPRESS, 2017, 4 (03):
[39] Exchange of experience the effect of synthesis time on the wear behavior of Al–8%Ti alloy produced by mechanical alloying
D. Özyürek
S. Tekeli
T. Tuncay
R. Yilmaz
Powder Metallurgy and Metal Ceramics, 2012, 51 : 491 - 495
[40] Effect of particle size of starting oxide powders on the performance of doped-lanthanum oxyapatite produced by mechanical alloying followed by microwave sintering
Oliveira, F. A. C.
Marcelo, T.
Alves, C.
Santos, M.
Mascarenhas, J.
Trindade, B.
ADVANCED POWDER TECHNOLOGY, 2014, 25 (05) : 1455 - 1461

← 1 2 3 4 5 →