Influence of High Temperature on Concrete Produced from Portland Cement with Boron Additives

被引：1

作者：

Davraz, M. ^{[1
]}

Pehlivanoglu, H. E. ^{[2
]}

Kilincarslan, S. ^{[1
]}

机构：

[1] Suleyman Demirel Univ, DEYMAM Dept, Isparta, Turkey

[2] Izmir Metropolitan Municipal, Zonning & Supervis Dept, Izmir, Turkey

来源：

ACTA PHYSICA POLONICA A | 2017年 / 132卷 / 03期

关键词：

HIGH-PERFORMANCE CONCRETE; MECHANICAL-PROPERTIES; COMPRESSIVE STRENGTH; MORTARS; BARITE;

D O I：

10.12693/APhysPolA.132.872

中图分类号：

O4 [物理学];

学科分类号：

0702 ;

摘要：

The boron compounds have been widely used as additives in the production of cement and concrete to enhance their engineering properties. In this study, three series of concrete specimens were produced using B2O3 additive materials, boron modified active belite cement and Portland cement. After 28 days of curing period the specimens were exposed to temperatures of 250, 500 and 750 degrees C. Mass loss and compressive strength were determined and recorded after the specimens were cooled to room temperature. It was concluded that the effect of the boron becomes more apparent at high temperatures.

引用

页码：872 / 874

页数：3

共 50 条

[41] INFLUENCE OF POLYMERIC ADDITIVES ON THE PROPERTIES OF CONCRETE MANUFACTURED ON THE BASIS OF AGGREGATES PRODUCED FROM CRUSHED CONCRETE WASTE
Finozenok, Olga
Zurauskiene, Ramune
Zurauskas, Rimvydas
Mikulenas, Linas
Korjakins, Aleksandrs
Shakhmenko, Genadijs
CIVIL ENGINEERING '13, PT I, 2013, 4 : 134 - 141
[42] Strength and sulfate resistance of concrete made with high alumina cement, Type 10 Portland Cement, Type 10 Portland Cement plus fly ash and Type 50 Portland Cement
Gillott, JE
Quinn, T
CEMENT CONCRETE AND AGGREGATES, 2003, 25 (01): : 21 - 27
[43] SUSTAINED HIGH TEMPERATURE EFFECT ON CONCRETES MADE WITH NORMAL PORTLAND CEMENT, NORMAL PORTLAND CEMENT AND SLAG, OR NORMAL PORTLAND CEMENT AND FLY ASH.
Carette, G.G.
Painter, Kerry E.
Malhotra, V.M.
Concrete International, 1982, 4 (07) : 41 - 51
[44] Behaviour of cement concrete at high temperature
Hager, I.
BULLETIN OF THE POLISH ACADEMY OF SCIENCES-TECHNICAL SCIENCES, 2013, 61 (01) : 145 - 154
[45] Influence of high temperature on the physical and mechanical properties of ordinary Portland cement and silica fume mortar
Akoz, Fevziye
Yuzer, Nabi
Koral, Sema
Teknik Dergi, 1995, 6 (01):
[46] HIGH EARLY STRENGTH CONCRETE BY MEANS OF VERY FINE PORTLAND CEMENT
BENNETT, EW
COLLINGS, BC
PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS, 1969, 43 (JUL): : 443 - &
[47] Freezing and Thawing Durability of High Early Strength Portland Cement Concrete
Porras, Yadira
Jones, Christopher
Schmiedeke, Nicole
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2020, 32 (05)
[48] Study on the Performance and Application of High Performance Pavement Portland Cement Concrete
Liu, Aiping
Yin, Jian
Song, Weimin
ADVANCES IN CIVIL INFRASTRUCTURE ENGINEERING, PTS 1 AND 2, 2013, 639-640 : 411 - +
[49] Measurements and Experimental Analysis of Temperature Variations in Portland Cement Concrete Pavement Systems
Kim, Seong-Min
Nam, Jeong-Hee
ROAD MATERIALS AND PAVEMENT DESIGN, 2010, 11 (03) : 745 - 771
[50] Effect of Portland Cement on Mechanical and Durability Properties of Geopolymer Concrete at Ambient Temperature
Sore, Seick Omar
Adufu, Yawo Daniel
Nshimiyimana, Philbert
Messan, Adamah
Escadeillas, Gilles
CIVIL ENGINEERING JOURNAL-TEHRAN, 2023, 9 (07): : 1597 - 1609

← 1 2 3 4 5 →