Influence of High Temperature on Concrete Produced from Portland Cement with Boron Additives

被引：1

作者：

Davraz, M. ^{[1
]}

Pehlivanoglu, H. E. ^{[2
]}

Kilincarslan, S. ^{[1
]}

机构：

[1] Suleyman Demirel Univ, DEYMAM Dept, Isparta, Turkey

[2] Izmir Metropolitan Municipal, Zonning & Supervis Dept, Izmir, Turkey

来源：

ACTA PHYSICA POLONICA A | 2017年 / 132卷 / 03期

关键词：

HIGH-PERFORMANCE CONCRETE; MECHANICAL-PROPERTIES; COMPRESSIVE STRENGTH; MORTARS; BARITE;

D O I：

10.12693/APhysPolA.132.872

中图分类号：

O4 [物理学];

学科分类号：

0702 ;

摘要：

The boron compounds have been widely used as additives in the production of cement and concrete to enhance their engineering properties. In this study, three series of concrete specimens were produced using B2O3 additive materials, boron modified active belite cement and Portland cement. After 28 days of curing period the specimens were exposed to temperatures of 250, 500 and 750 degrees C. Mass loss and compressive strength were determined and recorded after the specimens were cooled to room temperature. It was concluded that the effect of the boron becomes more apparent at high temperatures.

引用

页码：872 / 874

页数：3

共 50 条

[21] STRENGTHS OF SULFOALUMINATE CEMENT CONCRETE AND ORDINARY PORTLAND CEMENT CONCRETE AFTER EXPOSURE TO HIGH TEMPERATURES
Tchekwagep, Jean Jacques Kouadjo
Wang, Shoude
Mukhopadhyay, Anol K.
Huang, Shifeng
Cheng, Xin
CERAMICS-SILIKATY, 2020, 64 (02) : 227 - 238
[22] UNIFORMITY OF FLOWING CONCRETE OBTAINED WITH THE USE OF HIGH RANGE WATER REDUCERS VS UNIFORMITY OF PORTLAND-CEMENT FROM WHICH FLOWING CONCRETE IS PRODUCED
SPROUSE, JH
AMERICAN CERAMIC SOCIETY BULLETIN, 1983, 62 (08): : 871 - 871
[23] Simulation of temperature rises in hardening Portland cement concrete and fly ash blended concrete
Wang, Xiao-Yong
MAGAZINE OF CONCRETE RESEARCH, 2013, 65 (15) : 930 - 941
[24] STRESS CAUSED BY TEMPERATURE GRADIENT IN PORTLAND CEMENT CONCRETE PAVEMENTS.
Richardson, Joseph M.
Armaghani, Jamshid M.
Transportation Research Record, 1987, : 7 - 13
[25] Influence of curing temperature on belite cement hydration: A comparative study with Portland cement
Shirani, Shiva
Cuesta, Ana
Morales-Cantero, Alejandro
De la Torre, Angeles G.
Olbinado, Margie P.
Aranda, Miguel A. G.
CEMENT AND CONCRETE RESEARCH, 2021, 147
[26] Influence of Paving Condition on Longitudinal Cracking of Portland Cement Concrete Pavement
Han, Lizhi
Chen, Liangliang
Tian, Bo
ADVANCED PAVEMENT RESEARCH, 2014, 857 : 204 - +
[27] Dehydration kinetics of Portland cement paste at high temperature
Zhang, Qi
Ye, Guang
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2012, 110 (01) : 153 - 158
[28] UNIFORMITY OF FLOWING CONCRETE OBTAINED WITH THE USE OF HIGH-RANGE WATER REDUCERS VS UNIFORMITY OF PORTLAND-CEMENT FROM WHICH FLOWING CONCRETE IS PRODUCED
SPROUSE, JH
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1984, 187 (APR): : 143 - INDE
[29] Influence of replacing Portland cement with three different concrete sludge wastes
Martins, Juliana Vieira
Silva Garcia, Dayana Cristina
Paulino Aguilar, Maria Teresa
dos Santos, White Jose
CONSTRUCTION AND BUILDING MATERIALS, 2021, 303
[30] Dehydration kinetics of Portland cement paste at high temperature
Qi Zhang
Guang Ye
Journal of Thermal Analysis and Calorimetry, 2012, 110 : 153 - 158

← 1 2 3 4 5 →