Optimization of Deposition Conditions for CNTs/Carbon Fiber Hybrid Multiscale Composites via Taguchi Method

被引：0

作者：

Wang, Yi-Qi ^{[1
]}

Ku, Hyoun-Kon ^{[1
]}

Byun, Joon-Hyung ^{[2
]}

Song, Jung-Il ^{[1
,2
]}

机构：

[1] Changwon Natl Univ, Dept Mech Engn, Chang Won 641773, South Korea

[2] Korea Inst Mat Sci, Composite Mat Grp, Chang Won 641773, South Korea

来源：

MULTI-FUNCTIONAL MATERIALS AND STRUCTURES III, PTS 1 AND 2 | 2010年 / 123-125卷

关键词：

Carbon nanotubes; Electrophoretic deposition; Optimization; Taguchi method; Electrical conductivity; Signal to noise; CARBON NANOTUBES; FABRICATION;

D O I：

10.4028/www.scientific.net/AMR.123-125.1179

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Electrophoretic deposition (EPD) technique was applied to deposit carbon nanotubes on a carbon fabric. Optimization of EPD conditions was investigated to improve electrical conductivity for CNTs/carbon fiber hybrid multiscale composites by Taguchi method. Based on design of experiment, a L-9(3)(4) orthogonal array was chosen to conduct experiments. Due to the electrical conductivity of composites increased with the increasing content of CNTs in composites, it was selected as the response on the analysis of the means (ANOM) and the signal to noise (S/N) ratio. In addition, scanning electron microscopy (SEM) was utilized to examine the distribution of CNTs on the surface of a carbon fabric. The statistical software MINITAB 14 was utilized to determine the optimal deposition conditions.

引用

页码：1179 / +

页数：2

共 50 条

[31] Optimization of Hot Gas Welding of Hybrid Thermoplastic-Thermoset Composites Using Taguchi Method
Steiner, Grete
Kuttner, Dominik
Lochner, Hans
Thor, Michael
APPLIED COMPOSITE MATERIALS, 2024, 31 (03) : 775 - 797
[32] Optimization of Hot Gas Welding of Hybrid Thermoplastic-Thermoset Composites Using Taguchi Method
Grete Steiner
Dominik Kuttner
Hans Lochner
Michael Thor
Applied Composite Materials, 2024, 31 : 775 - 797
[33] Mechanical Properties of Graphene Nanoplatelet/Carbon Fiber/Epoxy Hybrid Composites: Multiscale Modeling and Experiments
Hadden, C. M.
Klimek-McDonald, D. R.
Pineda, E. J.
King, J. A.
Reichanadter, A. M.
Miskioglu, I.
Gowtham, S.
Odegard, G. M.
PROCEEDINGS OF THE AMERICAN SOCIETY FOR COMPOSITES: THIRTIETH TECHNICAL CONFERENCE, 2015, : 1226 - 1241
[34] MECHANICAL PROPERTIES OF GRAPHENE NANOPLATELET/CARBON FIBER/EPOXY HYBRID COMPOSITES: MULTISCALE MODELING AND EXPERIMENTS
Hadden, C. M.
Klimek-McDonald, D. R.
Pineda, E. J.
King, J. A.
Reichanadter, A. M.
Miskioglu, I
Gowtham, S.
Odegard, G. M.
20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,
[35] Mechanical properties of graphene nanoplatelet/carbon fiber/epoxy hybrid composites: Multiscale modeling and experiments
Hadden, C. M.
Klimek-McDonald, D. R.
Pineda, E. J.
King, J. A.
Reichanadter, A. M.
Miskioglu, I.
Gowtham, S.
Odegard, G. M.
CARBON, 2015, 95 : 100 - 112
[36] Prediction of thermal conductivities of carbon-containing fiber-reinforced and multiscale hybrid composites
Sung, Dae Han
Kim, Myungsoo
Park, Young-Bin
COMPOSITES PART B-ENGINEERING, 2018, 133 : 232 - 239
[37] Preparation of carbon nanotube/carbon fiber hybrid fiber by combining electrophoretic deposition and sizing process for enhancing interfacial strength in carbon fiber composites
Zhang, S.
Liu, W. B.
Hao, L. F.
Jiao, W. C.
Yang, F.
Wang, R. G.
COMPOSITES SCIENCE AND TECHNOLOGY, 2013, 88 : 120 - 125
[38] Multiscale modeling of PVDF matrix carbon fiber composites
Greminger, Michael
Haghiashtiani, Ghazaleh
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 2017, 25 (04)
[39] Friction and Wear Properties of Polyimide-Based Composites with a Multiscale Carbon Fiber-Carbon Nanotube Hybrid
Beibei Chen
Xiaofang Li
Xiang Li
Yuhan Jia
Jin Yang
Guangbin Yang
Changsheng Li
Tribology Letters, 2017, 65
[40] Friction and Wear Properties of Polyimide-Based Composites with a Multiscale Carbon Fiber-Carbon Nanotube Hybrid
Chen, Beibei
Li, Xiaofang
Li, Xiang
Jia, Yuhan
Yang, Jin
Yang, Guangbin
Li, Changsheng
TRIBOLOGY LETTERS, 2017, 65 (03)

← 1 2 3 4 5 →