Optimization of Deposition Conditions for CNTs/Carbon Fiber Hybrid Multiscale Composites via Taguchi Method

被引：0

作者：

Wang, Yi-Qi ^{[1
]}

Ku, Hyoun-Kon ^{[1
]}

Byun, Joon-Hyung ^{[2
]}

Song, Jung-Il ^{[1
,2
]}

机构：

[1] Changwon Natl Univ, Dept Mech Engn, Chang Won 641773, South Korea

[2] Korea Inst Mat Sci, Composite Mat Grp, Chang Won 641773, South Korea

来源：

MULTI-FUNCTIONAL MATERIALS AND STRUCTURES III, PTS 1 AND 2 | 2010年 / 123-125卷

关键词：

Carbon nanotubes; Electrophoretic deposition; Optimization; Taguchi method; Electrical conductivity; Signal to noise; CARBON NANOTUBES; FABRICATION;

D O I：

10.4028/www.scientific.net/AMR.123-125.1179

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Electrophoretic deposition (EPD) technique was applied to deposit carbon nanotubes on a carbon fabric. Optimization of EPD conditions was investigated to improve electrical conductivity for CNTs/carbon fiber hybrid multiscale composites by Taguchi method. Based on design of experiment, a L-9(3)(4) orthogonal array was chosen to conduct experiments. Due to the electrical conductivity of composites increased with the increasing content of CNTs in composites, it was selected as the response on the analysis of the means (ANOM) and the signal to noise (S/N) ratio. In addition, scanning electron microscopy (SEM) was utilized to examine the distribution of CNTs on the surface of a carbon fabric. The statistical software MINITAB 14 was utilized to determine the optimal deposition conditions.

引用

页码：1179 / +

页数：2

共 50 条

[21] Optimization of hybrid aluminum composites wear using Taguchi method and artificial neural network
Stojanovic, Blaza
Blagojevic, Jasmina
Babic, Miroslav
Velickovic, Sandra
Miladinovic, Slavica
INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2017, 69 (06) : 1005 - 1015
[22] Multiscale graphene/carbon fiber reinforced copper matrix hybrid composites: Microstructure and properties
Zhang, Xinjiang
Yang, Wenchao
Zhang, Jinyi
Ge, Xinyi
Liu, Xueran
Zhan, Yongzhong
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 743 : 512 - 519
[23] Optimization of the Effect of Accelerated Weathering Conditions on Wood Surfaces via the Taguchi Method
Kurt, Rifat
Can, Ahmet
BIORESOURCES, 2021, 16 (01) : 1642 - 1653
[24] Optimization of catalyst formation conditions for synthesis of carbon nanotubes using Taguchi method
Pander, Adam
Hatta, Akimitsu
Furuta, Hiroshi
APPLIED SURFACE SCIENCE, 2016, 371 : 425 - 435
[25] Impact of graphite on tribo-mechanical, structural, and thermal behaviors of polyoxymethylene copolymer/glass fiber hybrid composites via Taguchi optimization
Vikram, Kamlendra
Bhaumik, Shubrajit
Pramanik, Sumit
POLYMER COMPOSITES, 2025, 46 (02) : 1768 - 1787
[26] Novel method for fiber volume fraction of carbon/glass hybrid fiber composites
Li, Xianhua
Sui, Xianhang
Xiang, Wenhang
Lin, Wei
SPECTROSCOPY LETTERS, 2024, 57 (03) : 115 - 121
[27] In situ growth of CNTs on carbon fiber by chemical vapor deposition
Yao, Z. Q.
Wang, C. G.
Wang, Y. X.
2019 INTERNATIONAL CONFERENCE ON NEW ENERGY AND FUTURE ENERGY SYSTEM, 2019, 354
[28] Optimization of thrust force in drilling of carbon-basalt hybrid composites through Taguchi and RSM
Murthy, B. R. N.
Rangappa, Ravichadra
Almouns, Maraheb Osamah
MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 9586 - 9591
[29] Electrical anisotropy in multiscale nanotube/fiber hybrid composites
Thostenson, Erik T.
Gangloff, John J., Jr.
Li, Chunyu
Byun, Joon-Hyung
APPLIED PHYSICS LETTERS, 2009, 95 (07)
[30] Multi-Response Optimization of Bamboo Fiber Reinforced Unsaturated Polyester Composites using Hybrid Taguchi - Grey Relational Analysis Method
Onyekwere, Okwuchi Smith
Oladeinde, Mobolaji H.
Edokpia, Raphael O.
JOURNAL OF INDUSTRIAL AND PRODUCTION ENGINEERING, 2021, 38 (02) : 98 - 107

← 1 2 3 4 5 →