A dynamic slicing algorithm for conformal additive manufacturing

被引:12
|
作者
Huang, Jigang [1 ]
Qin, Qin [2 ]
Wen, Cheng [1 ]
Chen, Zhuoxi [1 ]
Huang, Kunlan [1 ]
Fang, Xia [1 ]
Wang, Jie [1 ]
机构
[1] Sichuan Univ, Sch Mech Engn, Chengdu 610065, Peoples R China
[2] Chengdu Univ Informat Technol, Dept Control Engn, Chengdu 610103, Peoples R China
关键词
Additive manufacturing; Multi-directional slicing algorithm; Slicing plane; 3D; DEVICES;
D O I
10.1016/j.addma.2022.102622
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Multi-directional slicing is one of the crucial steps for realizing non-supporting conformal additive manufacturing (AM). In the present work, a novel strategy for multi-directional slicing is reported. Unlike existing multidirectional slicing strategies, no extra computations were included in the proposed technique, making this novel slicing algorithm to be simple, accurate, and efficient. The slicing process was achieved by directly determining the slicing plane of each layer, whereas the geometric relationship between each slicing plane and a three-dimensional model was used to evaluate the optimal slicing plane for each layer. In addition, a method for searching the optimal slicing plane with a cost-effective computation was also provided. After determining the slicing plane, the coordinate transformation was executed to calculate the slicing contour. Finally, the proposed dynamic slicing algorithm was compared with uniform-directional slicing to verify its performance.
引用
收藏
页数:9
相关论文
共 50 条
  • [41] A review of slicing methods for directed energy deposition based additive manufacturing
    Xu, Jing
    Gu, Xizhi
    Ding, Donghong
    Pan, Zengxi
    Chen, Ken
    RAPID PROTOTYPING JOURNAL, 2018, 24 (06) : 1012 - 1025
  • [42] Adaptive Slicing in the Additive Manufacturing Process Using the Statistical Layered Analysis
    Garashchenko, Yaroslav
    Zubkova, Nina
    ADVANCES IN DESIGN, SIMULATION AND MANUFACTURING III: MANUFACTURING AND MATERIALS ENGINEERING, VOL 1, 2020, : 253 - 263
  • [43] Adaptive forward design for slicing of additive manufacturing based on ring neighborhood
    Xu J.
    Sheng H.
    Gao M.
    Zhang S.
    Liu X.
    Tan J.
    Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS, 2023, 29 (07): : 2363 - 2375
  • [44] Slicing vector fields into tool paths for additive manufacturing of nematic elastomers
    Zmyslony, Michal
    Dradrach, Klaudia
    Biggins, John S.
    ADDITIVE MANUFACTURING, 2025, 97
  • [45] Additive manufacturing-assisted conformal cooling channels in mold manufacturing processes
    Shinde, Mahesh S.
    Ashtankar, Kishor M.
    ADVANCES IN MECHANICAL ENGINEERING, 2017, 9 (05)
  • [46] A New Dynamic Algorithm for Petri Nets Slicing
    Roci, Albana
    Davidrajuh, Reggie
    2020 IEEE 14TH INTERNATIONAL CONFERENCE ON APPLICATION OF INFORMATION AND COMMUNICATION TECHNOLOGIES (AICT2020), 2020,
  • [47] Conformal additive manufacturing using a direct-print process
    Alkadi, Faez
    Lee, Kyung-Chang
    Bashiri, Abdullateef H.
    Choi, Jae-Won
    ADDITIVE MANUFACTURING, 2020, 32
  • [48] Automated process planning for conformal wire arc additive manufacturing
    Bhatt, Prahar M.
    Kulkarni, Ashish
    Kanyuck, Alec
    Malhan, Rishi K.
    Santos, Luis S.
    Thakar, Shantanu
    Bruck, Hugh A.
    Gupta, Satyandra K.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 119 (5-6): : 3545 - 3570
  • [49] Automated process planning for conformal wire arc additive manufacturing
    Prahar M. Bhatt
    Ashish Kulkarni
    Alec Kanyuck
    Rishi K. Malhan
    Luis S. Santos
    Shantanu Thakar
    Hugh A. Bruck
    Satyandra K. Gupta
    The International Journal of Advanced Manufacturing Technology, 2022, 119 : 3545 - 3570
  • [50] Research on fitting algorithm for slicing data in rapid prototyping and manufacturing
    Peng, Xuejun
    Xiao, Yuejia
    Han, Ming
    Huang, Shuhuai
    Huazhong Ligong Daxue Xuebao/Journal Huazhong (Central China) University of Science and Technology, 2000, 28 (05): : 27 - 29