Adaptive forward design for slicing of additive manufacturing based on ring neighborhood

被引：0
|
作者：
Xu J. [1 ]
Sheng H. [1 ]
Gao M. [1 ]
Zhang S. [1 ]
Liu X. [1 ]
Tan J. [1 ]
机构：
[1] Engineering Research Center for Design Engineering and Digital Twin of Zhcjiang Province, Zhcjiang University, Hangzhou
来源：
Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS | 2023年 / 29卷 / 07期
关键词：
adaptive slicing; additive manufacturing; digital twin; ring neighborhood; salient feature;
D O I：
10.13196/j.cims.2023.07.019
中图分类号：
学科分类号：
摘要：
To improve the surface accuracy and manufacturing efficiency of multi-feature forming, an adaptive forward design approach for slicing of Additive Manufacturing (AM) based on Ring Neighborhood (RN) was proposed. The multi-order RN of the model was constructed. The model salicncy was calculated based on Gaussian weighted average of the mean curvature with variable scale, and the salient features were determined by dynamic clustering. The initial layer thicknesses were determined based on the change of morphological salicncy lines obtained recursively, and a self-consistent Slicing Programming Forward Design (SPFD) mathematical model was established. Further, the virtual printing of AM was realized with digital twin technology. The layered projection arc-as of the virtual printing model on the positive and lateral planes in the printing coordinate system were used as material thcrmo-plastic constraints, and the double-linked circular list and octree were applied to calculate the Boolean union of the projection area set to realize the SPFD of multi-feature iteration. The surface roughness of different feature regions of the printed model was measured by a contact profilomctcr. The results showed that the approach could effectively slice multi-feature manifold models adaptively, which was helpful to improve the layered manufacturing efficiency and quality of 3D Printing and 4D Printing. © 2023 CIMS. All rights reserved.
引用
收藏
页码：2363 / 2375
页数：12
相关论文
共 32 条
  • [1] KUMAR A, VERMA S, JENG J Y., Supportless lattice structures for energy absorption fabricated by fused deposition modeling, 3D Printing and Additive Manufacturing, 7, 2, pp. 85-96, (2020)
  • [2] MCCARTY M C, CHEN S J, ENGLISH J D, Et al., Effect of print orientation and duration of ultraviolet curing on tbe dimensional accuracy of a 3-dimensionally printed ortbodontic clear aligner design, American Journal of Ortbodontics and Dentofacial Orthopedics, 158, 6, pp. 889-897, (2020)
  • [3] KULKARNI P, DUTTA D., An accurate slicing procedure for layered manufacturing, Computer-Aided Design, 28, 9, pp. 683-697, (1996)
  • [4] MANI K, KULKARNI P, DUTTA D., Region-based adaptive slicing, Computer-Aided Design, 31, 5, pp. 317-333, (1999)
  • [5] CHOHAN J S, SINGH R., Pre and post processing techniques to improve surface characteristics of FDM parts: A state of art review and future applications, Rapid Prototyping Journal, 23, 3, pp. 495-513, (2017)
  • [6] DOLENC A, MAKELA I., Slicing procedure for layered manufacturing techniques, Computer-Aided Design, 26, 2, pp. 119-126, (1994)
  • [7] SABOURIN E, HOUSER S A, BOHN J H., Adaptive slicing using stepwise uniform refinement, Rapid Prototyping Journal, 2, 4, pp. 20-26, (1996)
  • [8] TYBERG J, BOHN J H., Local adaptive slicing, Rapid Prototyping Journal, 4, 3, pp. 118-127, (1998)
  • [9] CORMIER D, UNNANON K, SANII E., Specifying non-uniform cusp heights as a potential aid for adaptive slicing, Rapid Prototyping Journal, 6, 3, pp. 204-211, (2000)
  • [10] HOUTMANN Y, DELEBECQUE B, BARLIER C., Adaptive local slicing in stratoconception by using critical points, Advances in Production Engineering Management, 4, 1-2, pp. 59-68, (2009)
1234