THE COOLING CAPACITY OF COOLANTS USED IN OXIDIZATION PROCESS OF HOT METAL BEARING VANADIUM BY BOF

被引：0
|
作者：
Huang, Qingyun [1 ]
Xie, Bing [1 ]
Zhao, Chongyang [1 ]
Li, Yugang [1 ]
机构：
[1] Chongqing Univ, Sch Mat Sci & Engn, Chongqing 630044, Peoples R China
来源：
METALURGIA INTERNATIONAL | 2012年 / 17卷 / 09期
基金：
中国国家自然科学基金;
关键词：
Cooling capacity; Coolants; Vanadium extraction; Specific heat capacity; Basic oxygen furnace;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Coolants is the key raw materials in vanadium extraction from hot metal by BOF to control the bath temperature. This paper studies the cooling capacity of coolants in two ways, theoretical calculation and DSC measurement. It is concluded that the cooling capacity measured by DSC is credible. And the order of the cooling capacity from big to small is pellet, residue slag, V-slag and pig iron.
引用
收藏
页码：5 / 9
页数：5
相关论文
共 42 条
  • [21] Self-digestion of Cr-Bearing Vanadium Slag Processing Residue via Hot Metal Pre-treatment in Steelmaking Process
    Bo Zhang
    Ruifang Wang
    Chengjun Liu
    Maofa Jiang
    Metallurgical and Materials Transactions B, 2022, 53 : 1183 - 1195
  • [22] Kinetic Study on the Oxidation of Elements in Hot Metal during Vanadium-Extraction Process
    Huang, Weijun
    Yu, Shan
    Shen, Xiang
    Xu, Lei
    Wang, Nan
    Chen, Min
    STEEL RESEARCH INTERNATIONAL, 2016, 87 (09) : 1228 - 1237
  • [23] RECOVERY OF VANADIUM FROM HOT METAL USING SHAKING LADLE PROCESS - A PRELIMINARY REPORT
    ROHRMANN, B
    RAPER, AG
    JOURNAL OF THE IRON AND STEEL INSTITUTE, 1970, 208 : 336 - &
  • [24] TOTAL-COST MINIMUM OPERATION IN BF-BOF PROCESS .2. COST EFFECT IN BOF OPERATION WITH HIGH MANGANESE AND LOW SILICON HOT METAL
    MATSUMURA, Y
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1984, 70 (12): : S936 - S936
  • [25] Prediction and Explanation Models for Hot Metal Temperature, Silicon Concentration, and Cooling Capacity in Ironmaking Blast Furnaces
    Lughofer, Edwin
    Pollak, Robert
    Feilmayr, Christoph
    Schatzl, Magdalena
    Saminger-Platz, Susanne
    STEEL RESEARCH INTERNATIONAL, 2021, 92 (09)
  • [26] The effect of cryogenic treatment on a high Co bearing DIN 1.2888 steel used as die in hot forging process
    Kiraz, Caner
    Birol, Burak
    Sagin, Ahmet
    MATERIALS RESEARCH EXPRESS, 2024, 11 (11)
  • [27] Optimization of casting process for manufacturing Babbitt metal bearing bushings used in diesel engines and experiment verification
    Tang, Qian
    Xu, Jun
    Gao, Zhan
    Pei, Lin-Qing
    Wu, Zhi-Yong
    Neiranji Xuebao/Transactions of CSICE (Chinese Society for Internal Combustion Engines), 2009, 27 (01): : 87 - 91
  • [28] Wind-induced limit bearing capacity in the whole construction process for a cooling tower based on ANSYS secondary development
    Ke, Shitang (keshitang@163.com), 2016, Chinese Vibration Engineering Society (35):
  • [29] Numerical Simulation for Metal Beryllium Used by Optics Components during Process of Cold & Hot Isostatic Pressing
    Xu H.
    He L.
    Li Z.
    Ye S.
    Wang D.
    Li C.
    Xiyou Jinshu/Chinese Journal of Rare Metals, 2022, 46 (02): : 185 - 194
  • [30] Effect of Cooling Rates in Coiling Process on Microstructures and Mechanical Properties in Al-Bearing Hot-Rolled TRIP Steel
    Xiao-Hui Wang
    Jian Kang
    Yun-Jie Li
    Guo Yuan
    R. D. K. Misra
    Guo-Dong Wang
    Acta Metallurgica Sinica (English Letters), 2019, 32 : 1207 - 1218
12345