Fatigue crack growth rate under different bending to torsion ratios in 10HNAP steel

被引：0
|
作者：
Marciniak, Zbigniew [1 ]
Rozumek, Dariusz [1 ]
机构：
[1] Opole Univ Technol, Dept Mech & Machine Design, PL-45271 Opole, Poland
来源：
MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE | 2011年 / 465卷
关键词：
plane specimens; fatigue crack growth; bending with torsion;
D O I：
10.4028/www.scientific.net/KEM.465.187
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The paper contains the fatigue test results of rectangular cross-section specimens made of 10HNAP steel. The specimen height to width ratio was 1.5. Bending with torsion tests were carried out for the following ratios of bending to torsional moments M-aB / M-aT = 0.47, 0.94, 1.87 and the loading frequency 26.5 Hz. The tests were performed in a high cycle fatigue regime for the stress ratio R = - 1 and phase shift between bending and torsion loading equal to phi = 0.
引用
收藏
页码：187 / 190
页数：4
相关论文
共 50 条
  • [41] Fatigue crack growth behavior of a 170 mm diameter stainless steel straight pipe subjected to combined torsion and bending load
    Selvakumar Veerarajan
    Dakshinamurthy Pukazhendhi
    Palla Gandhi
    Frontiers of Structural and Civil Engineering, 2021, 15 : 905 - 913
  • [42] Fatigue crack growth behavior of a 170 mm diameter stainless steel straight pipe subjected to combined torsion and bending load
    Veerarajan, Selvakumar
    Pukazhendhi, Dakshinamurthy
    Gandhi, Palla
    FRONTIERS OF STRUCTURAL AND CIVIL ENGINEERING, 2021, 15 (04) : 905 - 913
  • [43] Fatigue crack growth behavior of a 170 mm diameter stainless steel straight pipe subjected to combined torsion and bending load
    Selvakumar VEERARAJAN
    Dakshinamurthy PUKAZHENDHI
    Palla GANDHI
    Frontiers of Structural and Civil Engineering, 2021, (04) : 905 - 913
  • [44] INFLUENCE OF STRUCTURE ON GROWTH RATE OF A FATIGUE CRACK IN RAIL STEEL
    STAKANOV.AA
    SOKOLOV, PS
    PHYSICS OF METALS AND METALLOGRAPHY-USSR, 1968, 26 (06): : 153 - &
  • [45] FATIGUE CRACK GROWTH RATE STUDIES ON STAINLESS STEEL WELDS
    Thomas, Manuel
    Prakash, Raghu, V
    Sundararaman, Ganesh
    Muthukumaran, Vasudevan
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2018, VOL 12, 2019,
  • [46] Fatigue crack growth in wheelset axles under bending and torsional loading
    Hannemann, R.
    Koester, P.
    Sander, M.
    INTERNATIONAL JOURNAL OF FATIGUE, 2019, 118 (262-270) : 262 - 270
  • [47] Fatigue Crack Growth Rate Studies on High-Strength Low-Alloy Steel under Different Loading Conditions
    S Elamurugu
    G Sudarshan Rao
    S Biju
    A K Mishra
    SVS Narayana Murty
    P Ramesh Narayanan
    Bhanu Pant
    Roy M Cherian
    Transactions of the Indian Institute of Metals, 2019, 72 : 1527 - 1531
  • [48] Fatigue Crack Growth Rate Studies on High-Strength Low-Alloy Steel under Different Loading Conditions
    Elamurugu, S.
    Rao, G. Sudarshan
    Biju, S.
    Mishra, A. K.
    Murty, S. V. S. Narayana
    Narayanan, P. Ramesh
    Pant, Bhanu
    Cherian, Roy M.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019, 72 (06) : 1527 - 1531
  • [49] Identification and prediction of fatigue crack growth under different stress ratios using acoustic emission data
    Chai, Mengyu
    Hou, Xinglong
    Zhang, Zaoxiao
    Duan, Quan
    INTERNATIONAL JOURNAL OF FATIGUE, 2022, 160
  • [50] An investigation on the circumferential surface crack growth in steel pipes subjected to fatigue bending
    Li, Zongchen
    Jiang, Xiaoli
    Hopman, Hans
    Zhu, Ling
    Liu, Zhiping
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, 105
12345