Evaluation of intergranular corrosion susceptibility of UNS S31803 duplex stainless steel with an optimized double loop electrochemical potentiokinetic reactivation method

被引：113
|
作者：
Gong, Jia [1 ]
Jiang, Y. M. [1 ]
Deng, B. [1 ]
Xu, J. L. [1 ]
Hu, J. P. [2 ]
Li, Jin [1 ]
机构：
[1] Fudan Univ, Dept Mat Sci, Shanghai 200433, Peoples R China
[2] Univ Oxford, Chem Res Lab, Oxford OX1 3TA, England
来源：
ELECTROCHIMICA ACTA | 2010年 / 55卷 / 18期
基金：
美国国家科学基金会;
关键词：
Duplex stainless steel; SEM; Intergranular corrosion; Electrochemical potentiokinetic reactivation; Precipitation; SIGMA-PHASE; DETECTING SENSITIZATION; EPR TECHNIQUE; UNSS31803; MICROSTRUCTURE; PRECIPITATION; ENVIRONMENTS; TOUGHNESS; BEHAVIOR;
D O I：
10.1016/j.electacta.2010.03.086
中图分类号：
O646 [电化学、电解、磁化学];
学科分类号：
081704 ;
摘要：
In this study, an optimized double loop electrochemical potentiokinetic reactivation (DL-EPR) test was applied to evaluate the degree of intergranular corrosion (IGC) susceptibility of duplex stainless steel UNS S31803. The measurement in a solution of 2 M H2SO4 + 1 M HCl at 30 degrees C with a scan rate of 1.66 mV s(-1) can successfully be used to analyze the interactions between precipitation, chromium depletion, and IGC sensitization of the UNS S31803 steel, which was aged between 30 min and 48 h at 800 degrees C. To gain an insight into the phase transition, the specimens were analyzed by scanning electron microscopy (SEM) and electron dispersive X-ray spectroscopy (EDX). The results indicated healing due to re-diffusion of Cr and Mo from the sigma phase to the gamma(2) phase. (C) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码：5077 / 5083
页数：7
相关论文
共 50 条
  • [41] Phase transformations of the duplex stainless steel UNS S31803 under non-isothermal conditions
    Freitas, Gabrielle Cristine Lemos Duarte
    da Fonseca, Glaucio Soares
    Moreira, Luciano Pessanha
    Leite, Duilio Norberto Ferronatto
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 11 : 1847 - 1851
  • [42] INTERGRANULAR CORROSION SUSCEPTIBILITY OF AUSTENITIC FERRITIC DUPLEX STAINLESS-STEELS - APPLICATION OF POTENTIOKINETIC REACTIVATION TESTS
    MERINO, P
    NOVOA, XR
    PENA, G
    PORTO, E
    ESPADA, L
    MATERIALS SCIENCE AND TECHNOLOGY, 1993, 9 (02) : 168 - 171
  • [43] Anisotropic response in mechanical and corrosion performances of UNS S31803 duplex stainless steel fabricated by laser powder bed fusion
    Zhang, Jiantao
    Zhu, He
    Xi, Xiaoying
    Li, Xingyi
    Xiao, Zhiyu
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 26 : 4860 - 4870
  • [44] Influence of the Microstructure on the Degree of Sensitization of a Duplex Stainless Steel UNS S31803 Aged at 650°C
    de Melo, Evelin Barbosa
    Magnabosco, Rodrigo
    Neto, Carlos de Moura
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2013, 16 (06): : 1336 - 1343
  • [45] Linear Voltammetry Assessment to Quantitative Determination of the Sigma Phase in Duplex Stainless Steel UNS S31803
    Haskel, Hudison Loch
    Sanches, Luciana Schimidlin
    Stocco Zempulski, Paulo Roberto
    Ponte, Haroldo de Araujo
    SOLDAGEM & INSPECAO, 2015, 20 (03): : 333 - 346
  • [46] Influence of Pulsed Arc Parameters on the Tig Welding Process for the Stainless Steel Duplex UNS S31803
    Generoso, Vinicius Marques Alves
    de Souza, Lucas Menezes
    Pereira, Elaine Cristina
    Monteiro, Sergio N.
    de Azevedo, Afonso R. G.
    MATERIALS, 2023, 16 (21)
  • [47] Effect of volume fraction of phases and precipitates on the mechanical behavior of UNS S31803 duplex stainless steel
    de Lacerda, J. C.
    Candido, L. C.
    Godefroid, L. B.
    INTERNATIONAL JOURNAL OF FATIGUE, 2015, 74 : 81 - 87
  • [48] Comparative Study Between Sensitization Degree of the 0.4% Mo Austenitic Stainless Steel and UNS S31803 Duplex Stainless Steel
    de Lacerda, Jose C.
    de Freitas, Lucas L.
    Brito, Rogerio F.
    Moura Filho, Francisco
    Teixeira, Ricardo L. P.
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2021, 24 (01):
  • [49] Pitting Corrosion Behavior of UNS S31803 and UNS S32304 Duplex Stainless Steels in 3.5 wt% NaCl Solution
    de Lacerda, Jose Carlos
    Perez Teixeira, Ricardo Luiz
    Ribeiro de Souza, Rafaella Maria
    Soares, Renata Braga
    Cunha Lins, Vanessa de Freitas
    MATERIA-RIO DE JANEIRO, 2020, 25 (02): : 1 - 10
  • [50] Evaluation of friction hydro-pillar processing welding in duplex stainless steels (UNS S31803)
    Meinhardt, C. P.
    Chludzinski, M.
    Ribeiro, R. F.
    Rocha, C. L. F.
    Santos, A. C. S.
    Strohaecker, T. R.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2017, 246 : 158 - 166
12345