Evaluation of intergranular corrosion susceptibility of UNS S31803 duplex stainless steel with an optimized double loop electrochemical potentiokinetic reactivation method

被引:113
|
作者
Gong, Jia [1 ]
Jiang, Y. M. [1 ]
Deng, B. [1 ]
Xu, J. L. [1 ]
Hu, J. P. [2 ]
Li, Jin [1 ]
机构
[1] Fudan Univ, Dept Mat Sci, Shanghai 200433, Peoples R China
[2] Univ Oxford, Chem Res Lab, Oxford OX1 3TA, England
基金
美国国家科学基金会;
关键词
Duplex stainless steel; SEM; Intergranular corrosion; Electrochemical potentiokinetic reactivation; Precipitation; SIGMA-PHASE; DETECTING SENSITIZATION; EPR TECHNIQUE; UNSS31803; MICROSTRUCTURE; PRECIPITATION; ENVIRONMENTS; TOUGHNESS; BEHAVIOR;
D O I
10.1016/j.electacta.2010.03.086
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
In this study, an optimized double loop electrochemical potentiokinetic reactivation (DL-EPR) test was applied to evaluate the degree of intergranular corrosion (IGC) susceptibility of duplex stainless steel UNS S31803. The measurement in a solution of 2 M H2SO4 + 1 M HCl at 30 degrees C with a scan rate of 1.66 mV s(-1) can successfully be used to analyze the interactions between precipitation, chromium depletion, and IGC sensitization of the UNS S31803 steel, which was aged between 30 min and 48 h at 800 degrees C. To gain an insight into the phase transition, the specimens were analyzed by scanning electron microscopy (SEM) and electron dispersive X-ray spectroscopy (EDX). The results indicated healing due to re-diffusion of Cr and Mo from the sigma phase to the gamma(2) phase. (C) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码:5077 / 5083
页数:7
相关论文
共 50 条
  • [31] Induction bending effects on mechanical properties and corrosion resistance of duplex stainless steel UNS S31803 pipes
    Pires Garcia, Pedro Soucasaux
    Pardal, Juan Manuel
    Maior Tavares, Sergio Souto
    de Souza, Larissa Ribeiro
    Meireles, Antonio Marcelo
    Lopes Souza, Mauro Carlos
    Lopez Areiza, Maria Cristina
    de Brito Martins, Tabatta Regina
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 121 (11-12): : 8329 - 8340
  • [32] Improvement of the cavitation erosion resistance of UNS S31803 stainless steel by duplex treatment
    Mesa, D. H.
    Pinedo, C. E.
    Tschiptschin, A. P.
    SURFACE & COATINGS TECHNOLOGY, 2010, 205 (05): : 1552 - 1556
  • [33] Detection of susceptibility to intergranular corrosion of aged super austenitic stainless steel S32654 by a modified electrochemical potentiokinetic reactivation method
    Zhang, Shucai
    Jiang, Zhouhua
    Li, Huabing
    Feng, Hao
    Zhang, Binbin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 695 : 3083 - 3093
  • [34] Investigation on ultra-pure ferritic stainless steel 436L susceptibility to intergranular corrosion using optimised double loop electrochemical potentiokinetic reactivation method
    Sun, Jiakun
    Sun, Li
    Dai, Nianwei
    Li, Jin
    Jiang, Yiming
    CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2018, 53 (08) : 574 - 581
  • [35] The FIMEC test to reveal the quality of duplex stainless steel UNS S31803 welded joints
    Montanari, R.
    Varone, A.
    Bonollo, F.
    Ferro, P.
    METALLURGIA ITALIANA, 2020, (03): : 24 - 31
  • [36] The effect of surface modification on the corrosion protection ability of the passive films of sensitized UNS S31803 duplex stainless steel
    Morshed-Behbahani, Khashayar
    Najafisayar, Pooria
    Pakshir, Mahmoud
    Zakerin, Nika
    CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2019, 54 (02) : 174 - 183
  • [37] The FIMEC test to reveal the quality of duplex stainless steel UNS S31803 welded joints
    Montanari, R.
    Varone, A.
    Bonollo, F.
    Ferro, P.
    Metallurgia Italiana, 2020, 112 (03): : 24 - 31
  • [38] Effect of cold deformation on the corrosion behaviour of UNS S31803 duplex stainless steel in simulated concrete pore solution
    Luo, Hong
    Wang, Xianzong
    Dong, Chaofang
    Xiao, Kui
    Li, Xiaogang
    CORROSION SCIENCE, 2017, 124 : 178 - 192
  • [39] Evaluation of Microstructural Effects on the Degree of Sensitization (DOS) of a UNS S31803 Duplex Stainless Steel Aged at 475°C
    de Melo, Evelin Barbosa
    Magnabosco, Rodrigo
    CORROSION, 2015, 71 (12) : 1490 - 1499
  • [40] Finite element modelling and characterization of friction welding on UNS S31803 duplex stainless steel joints
    Asif, Mohammed M.
    Shrikrishana, Kulkarni Anup
    Sathiya, P.
    ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, 2015, 18 (04): : 704 - 712