JOINING OF IRON BASED POWDER METALLURGY PARTS WITH SINTERING

被引：0

作者：

Avsar, Emre ^{[1
,2
]}

Durlu, Nuri ^{[1
,2
]}

Atas, Aytac ^{[3
]}

Bozaci, Cengiz ^{[3
]}

Ozdural, Husnu ^{[3
]}

机构：

[1] TOBB Ekon, Ankara, Turkey

[2] Teknol Univ, Makine Muhendisligi Bolumu, Ankara, Turkey

[3] Tozmet Ticaret & Sanayi AS Istanbul, Istanbul, Turkey

来源：

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY | 2010年 / 25卷 / 04期

关键词：

Iron based powders; joining with sintering; bond strength; mechanical properties; bond interface; STRENGTH;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, joining of iron based green and pre-sintered powder metal parts by sintering was examined. Samples were pressed at 600 MPa and sintered at 1120 degrees C for 45 minutes under reducing (%90N(2) + %10H(2)) and endogas atmospheres. Mechanical properties of iron based powder samples (Fe-%0.6P, Fe-%0.6P-%2Cu, Fe-%0.6P-%3Cu-%0.4C) were measured under green and sintered conditions. In joining with sintering experiments ring-pellet geometry was utilized. Green and pre-sintered ring (Fe-%0.6P, Fe-%0.6P-%2Cu) and pellet (Fe-%0.6P-% 3Cu-%0.4C) samples were joined by sintering and their bonding strengths were measured. The interface formed after sinter joining was examined with optical and scanning electron microscopy. The study show that green parts can be joined by sintering without an appreciable loss in bonding strength.

引用

页码：713 / 718

页数：6

共 50 条

[31] A Novel Process for Joining Ti Alloy and Al Alloy using Two-Stage Sintering Powder Metallurgy
Long, Luping
Liu, Wensheng
Ma, Yunzhu
Wu, Lei
Liu, Chao
HIGH TEMPERATURE MATERIALS AND PROCESSES, 2018, 37 (05) : 437 - 444
[32] Ultrasonic inspection system for powder metallurgy parts
Turo, Antoni
Chavez, Juan A.
Garcia-Hernandez, Miguel J.
Bulkai, Andras
Tomek, Peter
Toth, Gabor
Girones, Anna
Salazar, Jordi
MEASUREMENT, 2013, 46 (03) : 1101 - 1108
[33] CONTRIBUTION TO METALLURGY OF IRON ORE SINTERING
HOFF, HG
KOOTZ, T
SCHWABE, G
STAHL UND EISEN, 1968, 88 (14): : 739 - &
[34] Rapid Discharge Sintering of Powder Metallurgy Components
Twomey, Barry
Breen, Aidan
Byrne, Greg
Dowling, Denis P.
IEEE TRANSACTIONS ON PLASMA SCIENCE, 2011, 39 (11) : 2594 - 2595
[35] Laser metal deposition for powder metallurgy parts
Selcuk, C.
POWDER METALLURGY, 2011, 54 (02) : 94 - 99
[36] DESIGN CHECKLIST FOR POWDER-METALLURGY PARTS
OSBORN, M
MACHINE DESIGN, 1971, 43 (11) : 61 - &
[37] Powder metallurgy wear-resistant materials based on iron. I. Materials prepared by sintering and infiltration
Baglyuk, GA
Posnyak, LA
POWDER METALLURGY AND METAL CERAMICS, 2001, 40 (1-2) : 34 - 39
[38] Sintering furnace for powder metal parts
Anon
2003, DMG World Media (UK) Ltd. (01):
[39] GLASS COATING FOR IRON- BASED POWDER METALLURGY COMPONENTS
Garkida, Adele
Hwang, Jiann-Yang
Huang, Xiaodi
Hein, Allison M.
TMS 2010 139TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND PROPERTIES, 2010, : 441 - 447
[40] Knowledge based and adaptive computational techniques for concurrent design of powder metallurgy parts
Cherian, RP
Midha, PS
Smith, LN
Pipe, AG
ADVANCES IN ENGINEERING SOFTWARE, 2001, 32 (06) : 455 - 465

← 1 2 3 4 5 →