JOINING OF IRON BASED POWDER METALLURGY PARTS WITH SINTERING

被引：0

作者：

Avsar, Emre ^{[1
,2
]}

Durlu, Nuri ^{[1
,2
]}

Atas, Aytac ^{[3
]}

Bozaci, Cengiz ^{[3
]}

Ozdural, Husnu ^{[3
]}

机构：

[1] TOBB Ekon, Ankara, Turkey

[2] Teknol Univ, Makine Muhendisligi Bolumu, Ankara, Turkey

[3] Tozmet Ticaret & Sanayi AS Istanbul, Istanbul, Turkey

来源：

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY | 2010年 / 25卷 / 04期

关键词：

Iron based powders; joining with sintering; bond strength; mechanical properties; bond interface; STRENGTH;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, joining of iron based green and pre-sintered powder metal parts by sintering was examined. Samples were pressed at 600 MPa and sintered at 1120 degrees C for 45 minutes under reducing (%90N(2) + %10H(2)) and endogas atmospheres. Mechanical properties of iron based powder samples (Fe-%0.6P, Fe-%0.6P-%2Cu, Fe-%0.6P-%3Cu-%0.4C) were measured under green and sintered conditions. In joining with sintering experiments ring-pellet geometry was utilized. Green and pre-sintered ring (Fe-%0.6P, Fe-%0.6P-%2Cu) and pellet (Fe-%0.6P-% 3Cu-%0.4C) samples were joined by sintering and their bonding strengths were measured. The interface formed after sinter joining was examined with optical and scanning electron microscopy. The study show that green parts can be joined by sintering without an appreciable loss in bonding strength.

引用

页码：713 / 718

页数：6

共 50 条

[21] GUIDELINES FOR DESIGNING POWDER METALLURGY PARTS
JAFFE, MI
MECHANICAL ENGINEERING, 1966, 88 (08) : 56 - &
[22] POWDER METALLURGY AS APPLIED TO MACHINE PARTS
LANGHAMMER, AJ
TRANSACTIONS OF THE AMERICAN INSTITUTE OF MINING AND METALLURGICAL ENGINEERS, 1945, 161 : 531 - 535
[23] WELDING POWDER-METALLURGY PARTS
WITHERELL, CE
INTERNATIONAL JOURNAL OF POWDER METALLURGY, 1982, 18 (04): : 323 - &
[24] Sintering of powder mixtures and the growth of ferrous powder metallurgy
Narasimhan, KS
MATERIALS CHEMISTRY AND PHYSICS, 2001, 67 (1-3) : 56 - 65
[25] Modeling the sintering of powder parts
M. V. Zagirnyak
V. P. Lyashenko
T. A. Grigorova
D. Miljavec
Powder Metallurgy and Metal Ceramics, 2011, 49 : 737 - 741
[26] MODELING THE SINTERING OF POWDER PARTS
Zagirnyak, M. V.
Lyashenko, V. P.
Grigorova, T. A.
Miljavec, D.
POWDER METALLURGY AND METAL CERAMICS, 2011, 49 (11-12) : 737 - 741
[27] Development of iron powder metallurgy
Gaiduchenko, AK
NaparaVolgina, SG
POWDER METALLURGY AND METAL CERAMICS, 1995, 34 (7-8) : 424 - 428
[28] BRUSH DEBURRING OF GREEN POWDER METALLURGY COMPACTS AND SINTERED AND GROUND POWDER METALLURGY PARTS
Saner, Jason
INTERNATIONAL JOURNAL OF POWDER METALLURGY, 2016, 52 (04): : 43 - +
[29] Recent trends in iron powder for powder metallurgy
Morioka, Yasuaki
Kawasaki Steel Technical Report, 1993, (29): : 3 - 13
[30] POWDER METALLURGY TRANSITION JOINT FOR JOINING GRAPHITE TO METALS
HAMMOND, JP
SLAUGHTE.GM
JOURNAL OF METALS, 1969, 21 (03): : A70 - &

← 1 2 3 4 5 →