JOINING OF IRON BASED POWDER METALLURGY PARTS WITH SINTERING

被引：0

作者：

Avsar, Emre ^{[1
,2
]}

Durlu, Nuri ^{[1
,2
]}

Atas, Aytac ^{[3
]}

Bozaci, Cengiz ^{[3
]}

Ozdural, Husnu ^{[3
]}

机构：

[1] TOBB Ekon, Ankara, Turkey

[2] Teknol Univ, Makine Muhendisligi Bolumu, Ankara, Turkey

[3] Tozmet Ticaret & Sanayi AS Istanbul, Istanbul, Turkey

来源：

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY | 2010年 / 25卷 / 04期

关键词：

Iron based powders; joining with sintering; bond strength; mechanical properties; bond interface; STRENGTH;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, joining of iron based green and pre-sintered powder metal parts by sintering was examined. Samples were pressed at 600 MPa and sintered at 1120 degrees C for 45 minutes under reducing (%90N(2) + %10H(2)) and endogas atmospheres. Mechanical properties of iron based powder samples (Fe-%0.6P, Fe-%0.6P-%2Cu, Fe-%0.6P-%3Cu-%0.4C) were measured under green and sintered conditions. In joining with sintering experiments ring-pellet geometry was utilized. Green and pre-sintered ring (Fe-%0.6P, Fe-%0.6P-%2Cu) and pellet (Fe-%0.6P-% 3Cu-%0.4C) samples were joined by sintering and their bonding strengths were measured. The interface formed after sinter joining was examined with optical and scanning electron microscopy. The study show that green parts can be joined by sintering without an appreciable loss in bonding strength.

引用

页码：713 / 718

页数：6

共 50 条

[1] Joining processes for powder metallurgy parts: a review
Selcuk, C.
Bond, S.
Woollin, P.
POWDER METALLURGY, 2010, 53 (01) : 7 - 11
[2] Medium-Frequency Electrical Resistance Sintering of Soft Magnetic Powder Metallurgy Iron Parts
Astacio, Raquel
Ternero, Fatima
Cintas, Jesus
Cuevas, Francisco G.
Montes, Juan Manuel
METALS, 2021, 11 (06)
[3] The effect of inductive sintering to iron based powder metal parts
Civi, Can
Atik, Enver
JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 753 : 517 - 524
[4] Investigation of machinability of iron based metal matrix composite (MMC) powder metallurgy parts
Szalay, Tibor
Czampa, Miklos
Markos, Sandor
Farkas, Balazs
2ND INTERNATIONAL ADVANCES IN APPLIED PHYSICS AND MATERIALS SCIENCE CONGRESS, 2012, 1476 : 300 - 303
[5] Design for Powder Metallurgy: Predicting Anisotropic Dimensional Change on Sintering of Real Parts
I. Cristofolini
A. Molinari
M. Zago
S. Amirabdollahian
O. Coube
M. J. Dougan
M. Larsson
M. Schneider
P. Valler
J. Voglhuber
L. Wimbert
International Journal of Precision Engineering and Manufacturing, 2019, 20 : 619 - 630
[6] Design for Powder Metallurgy: Predicting Anisotropic Dimensional Change on Sintering of Real Parts
Cristofolini, I.
Molinari, A.
Zago, M.
Amirabdollahian, S.
Coube, O.
Dougan, M. J.
Larsson, M.
Schneider, M.
Valler, P.
Voglhuber, J.
Wimbert, L.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2019, 20 (04) : 619 - 630
[7] SINTERING IN POWDER-METALLURGY
EUDIER, M
BULLETIN DE LA SOCIETE FRANCAISE DE CERAMIQUE, 1972, (97): : 21 - 28
[8] Outstanding powder metallurgy parts
Dale, James
ADVANCED MATERIALS & PROCESSES, 2008, 166 (08): : 52 - 53
[9] JOINING POWDER METAL PARTS
MIDDLE, JE
CME-CHARTERED MECHANICAL ENGINEER, 1980, 27 (07): : 55 - 60
[10] DESIGNING POWDER METALLURGY PARTS
JAFFE, MI
MECHANICAL ENGINEERING, 1966, 88 (11) : 53 - &

← 1 2 3 4 5 →