Effect of UV Exposure on Mechanical Properties of POSS Reinforced Epoxy Nanocomposites

被引：1
|
作者：
Hamim, Salah U. [1 ]
Mishra, Kunal [1 ]
Singh, Raman P. [1 ]
机构：
[1] Oklahoma State Univ, Sch Mech & Aerosp Engn, Stillwater, OK 74075 USA
来源：
CHALLENGES IN MECHANICS OF TIME-DEPENDENT MATERIALS, VOL 2 | 2015年
关键词：
Glycidyl POSS; Nanocomposite; UV exposure; Elastic modulus; Creep compliance; SENSING INDENTATION; PHOTODEGRADATION;
D O I：
10.1007/978-3-319-06980-7_18
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
Epoxy nanocomposites containing 5 wt% glycidyl Polyhedral Oligomeric Silsesquioxane (POSS) by weight is prepared. Elastic and viscoelastic properties of the neat epoxy and epoxy/POSS nanocomposite has been studied using nanoindentation technique. Elastic modulus of the polymer systems are determined using modified Oliver-Pharr method taking creep rate into account. Creep compliance properties of the studied systems are determined by fitting a standard linear solid model to the creep plot. Both neat epoxy and epoxy/POSS nanocomposite showed an increase in elastic modulus and a decrease in creep compliance as a function of UV exposure time; although, the effect of UV exposure is more pronounced in case of epoxy/POSS nanocomposite. It is speculated that the excess epoxide groups present in the glycidyl POSS is going through further crosslinking during the UV exposure leading to the observed higher rate of property change compared to neat epoxy.
引用
收藏
页码：147 / 152
页数：6
相关论文
共 50 条
  • [31] Graphene Nanosheets Reinforced Epoxy Nanocomposites: Mechanical and Electrical Properties Evaluation
    Vahedi, F.
    Eskandarzade, M.
    Osouli-Bostanabad, K.
    Tutunchi, A.
    POLYMER SCIENCE SERIES A, 2018, 60 (06) : 854 - 865
  • [32] Dispersion technology on mechanical properties of carbon nanomaterials reinforced epoxy nanocomposites
    Chiang, Chin-Lung
    Hsu, Chien-Wei
    Wu, Hsiu-Ming
    Shen, Ming-Yuan
    MODERN PHYSICS LETTERS B, 2020, 34 (7-9):
  • [33] Environmental degradation of epoxy-organoclay nanocomposites due to UV exposure: Part II residual mechanical properties
    Woo, Ricky S. C.
    Zhu, Honggang
    Leung, Christopher K. Y.
    Kim, Jang-Kyo
    COMPOSITES SCIENCE AND TECHNOLOGY, 2008, 68 (09) : 2149 - 2155
  • [34] THE EFFECT OF CLAY/EPOXY DEBONDING TO THE MECHANICAL PROPERTIES OF NANOCOMPOSITES
    Park, J. Y.
    Fay, T. A.
    IMECE 2009: PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, VOL 11, 2010, : 225 - 234
  • [35] MOISTURE EFFECT ON MECHANICAL PROPERTIES OF GRAPHENE/EPOXY NANOCOMPOSITES
    Liu, H. -K.
    Wang, Y. -C.
    Huang, T. -H.
    JOURNAL OF MECHANICS, 2016, 32 (06) : 673 - 682
  • [36] Mechanical and thermal properties of epoxy-POSS reinforced(biphenyl diol formaldehyde/epoxy hybrid resin) composites
    Chen, Shihui
    Gao, Jungang
    Han, Hongzhe
    Wang, Chao
    IRANIAN POLYMER JOURNAL, 2014, 23 (08) : 609 - 617
  • [37] Structural and dielectric properties of POSS reinforced polyimide nanocomposites
    Birtane, Hatice
    Esmer, Kadir
    Madakbas, Seyfullah
    Kahraman, Memet Vezir
    JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY, 2019, 56 (03): : 245 - 252
  • [38] The effect of POSS on the thermal properties of epoxy
    Zengping Zhang
    Guozheng Liang
    Xiaolei Wang
    Polymer Bulletin, 2007, 58 : 1013 - 1020
  • [39] The effect of POSS on the thermal properties of epoxy
    Zhang, Zengping
    Liang, Guozheng
    Wang, Xiaolei
    POLYMER BULLETIN, 2007, 58 (5-6) : 1013 - 1020
  • [40] MECHANICAL PROPERTIES OF EPOXY NANOCOMPOSITES
    Eldessouki, Mohamed
    Shady, Ebraheem
    Gowayed, Yasser
    NANOCON 2015: 7TH INTERNATIONAL CONFERENCE ON NANOMATERIALS - RESEARCH & APPLICATION, 2015, : 25 - 32
12345