Effect of UV Exposure on Mechanical Properties of POSS Reinforced Epoxy Nanocomposites

被引：1

作者：

Hamim, Salah U. ^{[1
]}

Mishra, Kunal ^{[1
]}

Singh, Raman P. ^{[1
]}

机构：

[1] Oklahoma State Univ, Sch Mech & Aerosp Engn, Stillwater, OK 74075 USA

来源：

CHALLENGES IN MECHANICS OF TIME-DEPENDENT MATERIALS, VOL 2 | 2015年

关键词：

Glycidyl POSS; Nanocomposite; UV exposure; Elastic modulus; Creep compliance; SENSING INDENTATION; PHOTODEGRADATION;

D O I：

10.1007/978-3-319-06980-7_18

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

Epoxy nanocomposites containing 5 wt% glycidyl Polyhedral Oligomeric Silsesquioxane (POSS) by weight is prepared. Elastic and viscoelastic properties of the neat epoxy and epoxy/POSS nanocomposite has been studied using nanoindentation technique. Elastic modulus of the polymer systems are determined using modified Oliver-Pharr method taking creep rate into account. Creep compliance properties of the studied systems are determined by fitting a standard linear solid model to the creep plot. Both neat epoxy and epoxy/POSS nanocomposite showed an increase in elastic modulus and a decrease in creep compliance as a function of UV exposure time; although, the effect of UV exposure is more pronounced in case of epoxy/POSS nanocomposite. It is speculated that the excess epoxide groups present in the glycidyl POSS is going through further crosslinking during the UV exposure leading to the observed higher rate of property change compared to neat epoxy.

引用

页码：147 / 152

页数：6

共 50 条

[21] Electrical and thermomechanical properties of epoxy-POSS nanocomposites
Bocek, J.
Matejka, L.
Mentlik, V.
Trnka, P.
Slouf, M.
EUROPEAN POLYMER JOURNAL, 2011, 47 (05) : 861 - 872
[22] The Effect of POSS Type on the Shape Memory Properties of Epoxy-Based Nanocomposites
Bram, Avraham I.
Gouzman, Irina
Bolker, Asaf
Eliaz, Noam
Verker, Ronen
MOLECULES, 2020, 25 (18):
[23] Dynamic mechanical characterization of epoxy/epoxycyclohexyl-POSS nanocomposites
Pistor, Vinicios
Ornaghi, Felipe G.
Ornaghi, Heitor L.
Zattera, Ademir J.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 532 : 339 - 345
[24] Synthesis and characterization of UV-cured epoxy acrylate/POSS nanocomposites
Wang, Ying
Liu, Fengguo
Xue, Xiangxin
PROGRESS IN ORGANIC COATINGS, 2013, 76 (05) : 863 - 869
[25] Effect of POSS on morphology and mechanical properties of polyamide 12/montmorillonite nanocomposites
Zhao, Feng
Bao, Xujin
McLauchlin, Andrew R.
Gu, Jiajie
Wan, Chaoying
Kandasubramanian, Bala
APPLIED CLAY SCIENCE, 2010, 47 (3-4) : 249 - 256
[26] Graphene Nanosheets Reinforced Epoxy Nanocomposites: Mechanical and Electrical Properties Evaluation
F. Vahedi
M. Eskandarzade
K. Osouli-Bostanabad
A. Tutunchi
Polymer Science, Series A, 2018, 60 : 854 - 865
[27] Mechanical and thermal properties of MoS2 reinforced epoxy nanocomposites
Madeshwaran, S. R.
Jayaganthan, R.
Velmurugan, R.
Gupta, N. K.
Manzhirov, A. V.
5TH INTERNATIONAL CONFERENCE ON TOPICAL PROBLEMS OF CONTINUUM MECHANICS WITH A SPECIAL SESSION IN HONOR OF ALEXANDER MANZHIROV'S 60TH BIRTHDAY, 2018, 991
[28] Mechanical and Thermal Properties of Epoxy Resin Nanocomposites Reinforced with Graphene Oxide
Liu, Qinghong
Zhou, Xufeng
Fan, Xinyu
Zhu, Chunyang
Yao, Xiayin
Liu, Zhaoping
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2012, 51 (03) : 251 - 256
[29] Manganese dioxide nanostructures reinforced epoxy nanocomposites: a study of mechanical properties
Balguri, Praveen Kumar
Samuel, Harris D. G.
Indira, Chilumala
Penki, Tirupathi Rao
Thumu, Udayabhaskararao
POLYMER-PLASTICS TECHNOLOGY AND MATERIALS, 2022, 61 (04): : 441 - 460
[30] Improved mechanical properties of coiled carbon nanotubes reinforced epoxy nanocomposites
Lau, Kin-tak
Lu, Mel
Liao, Kin
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2006, 37 (10) : 1837 - 1840

← 1 2 3 4 5 →